# wtb small truck tool box **URL:** \ **Category:** Classifieds\ **Created:** [October 10, 2010, 9:03pm UTC](https://forums.speedlife.net/t/wtb-small-truck-tool-box/254981 "2010-10-10T21:03:58Z")\ **Posts on this page:** 16\ **Page:** 1
**Author:** ![vcforlife15](https://avatars.discourse-cdn.com/v4/letter/v/e480ec/32.png) [@vcforlife15](https://forums.speedlife.net/u/vcforlife15)\ **Post date:** [October 10, 2010, 9:03pm UTC](https://forums.speedlife.net/t/wtb-small-truck-tool-box/254981/1 "2010-10-10T21:03:58Z")
Anyone happen to have a tool box laying around that will fit in a Nissan frontier? Looking to keep it pretty cheap here does not have to be anything special or pretty. ---
**Author:** ![Vovchandr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/vovchandr/32/6275_2.png) [@Vovchandr](https://forums.speedlife.net/u/Vovchandr)\ **Post date:** [October 11, 2010, 2:51am UTC](https://forums.speedlife.net/t/wtb-small-truck-tool-box/254981/2 "2010-10-11T02:51:35Z")
I’ve got one I’ll sell for $100. Never mounted outside, I just used it as a box for Crx parts. Let me know your dimensions of the bed. ---
**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\ **Post date:** [October 11, 2010, 4:33am UTC](https://forums.speedlife.net/t/wtb-small-truck-tool-box/254981/3 "2010-10-11T04:33:04Z")
i have one also it came out of the truck i just bought . its alum and its decent shape 50 bucks if it will fit your truck ---
**Author:** ![Built\_Not\_Bought](https://avatars.discourse-cdn.com/v4/letter/b/f08c70/32.png) [@Built\_Not\_Bought](https://forums.speedlife.net/u/Built_Not_Bought)\ **Post date:** [October 11, 2010, 6:29am UTC](https://forums.speedlife.net/t/wtb-small-truck-tool-box/254981/4 "2010-10-11T06:29:16Z")
> [@FS: 1997 CHEVY BLAZER](https://forums.speedlife.net/t/fs-1997-chevy-blazer/35277/37): > > i have one also it came out of the truck i just bought . its alum and its decent shape 50 bucks if it will fit your truck Thats a good deal I was looking for one a few months back and couldnt find em under $100 ---
**Author:** ![vcforlife15](https://avatars.discourse-cdn.com/v4/letter/v/e480ec/32.png) [@vcforlife15](https://forums.speedlife.net/u/vcforlife15)\ **Post date:** [October 11, 2010, 8:07am UTC](https://forums.speedlife.net/t/wtb-small-truck-tool-box/254981/5 "2010-10-11T08:07:39Z")
The bed it self is 4ft wide, but between the wheel wells it is only 41" The wheel wells start at about 14" Any of the above going to fit? ---
**Author:** ![Vovchandr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/vovchandr/32/6275_2.png) [@Vovchandr](https://forums.speedlife.net/u/Vovchandr)\ **Post date:** [October 11, 2010, 8:10am UTC](https://forums.speedlife.net/t/wtb-small-truck-tool-box/254981/6 "2010-10-11T08:10:02Z")
I’ll get measurements today and let you know. ---
**Author:** ![vcforlife15](https://avatars.discourse-cdn.com/v4/letter/v/e480ec/32.png) [@vcforlife15](https://forums.speedlife.net/u/vcforlife15)\ **Post date:** [October 11, 2010, 8:18am UTC](https://forums.speedlife.net/t/wtb-small-truck-tool-box/254981/7 "2010-10-11T08:18:24Z")
> [@zeppelin is finally back!](https://forums.speedlife.net/t/zeppelin-is-finally-back/35042/9): > > I’ll get measurements today and let you know. Okay, thanks. If it will fit give me a call, would like to pick one up tonight… 421-1116 Thanks, Jimmy ---
**Author:** ![PJB](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pjb/32/6389_2.png) [@PJB](https://forums.speedlife.net/u/PJB)\ **Post date:** [October 11, 2010, 6:27pm UTC](https://forums.speedlife.net/t/wtb-small-truck-tool-box/254981/8 "2010-10-11T18:27:56Z")
> [@FS: 1997 CHEVY BLAZER](https://forums.speedlife.net/t/fs-1997-chevy-blazer/35277/37): > > i have one also it came out of the truck i just bought . its alum and its decent shape 50 bucks if it will fit your truck what truck did you just buy? ---
**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\ **Post date:** [October 12, 2010, 4:30am UTC](https://forums.speedlife.net/t/wtb-small-truck-tool-box/254981/9 "2010-10-12T04:30:23Z")
i just bought a 94 k 1500 . its got the z71 pachage and tow setup i need and is a lot stronger than the f-150 in the pullin department . so ill be sellin the f here pretty soon once i get the chevy setup more to my liking ---
**Author:** ![vcforlife15](https://avatars.discourse-cdn.com/v4/letter/v/e480ec/32.png) [@vcforlife15](https://forums.speedlife.net/u/vcforlife15)\ **Post date:** [October 12, 2010, 8:27am UTC](https://forums.speedlife.net/t/wtb-small-truck-tool-box/254981/10 "2010-10-12T08:27:51Z")
> [@Which AT truck tire?](https://forums.speedlife.net/t/which-at-truck-tire/35745/9): > > i just bought a 94 k 1500 . its got the z71 pachage and tow setup i need and is a lot stronger than the f-150 in the pullin department . so ill be sellin the f here pretty soon once i get the chevy setup more to my liking Any measurments? Vlads did not fit w.o cutting bed liner ---
**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\ **Post date:** [October 12, 2010, 11:08am UTC](https://forums.speedlife.net/t/wtb-small-truck-tool-box/254981/11 "2010-10-12T11:08:01Z")
its off a 94 chevy k1500 man , il get measures later tonight when im at the truck ---
**Author:** ![Vovchandr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/vovchandr/32/6275_2.png) [@Vovchandr](https://forums.speedlife.net/u/Vovchandr)\ **Post date:** [October 12, 2010, 2:36pm UTC](https://forums.speedlife.net/t/wtb-small-truck-tool-box/254981/12 "2010-10-12T14:36:26Z")
Full size truck box def won’t fit in a Frontier bed FYI. ---
**Author:** ![vcforlife15](https://avatars.discourse-cdn.com/v4/letter/v/e480ec/32.png) [@vcforlife15](https://forums.speedlife.net/u/vcforlife15)\ **Post date:** [October 12, 2010, 6:25pm UTC](https://forums.speedlife.net/t/wtb-small-truck-tool-box/254981/13 "2010-10-12T18:25:56Z")
Yeah i didn’t know it was a full size truck. I still might take yours off your hands. Still haven’t had much luck on finding one to fit the bed liner did a little research last night. Did find out why the liner is so much bigger than the wheels wells its self. It because it is universal for all frontier models. I will probably be in touch with you in the next week or so. ---
**Author:** ![Vovchandr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/vovchandr/32/6275_2.png) [@Vovchandr](https://forums.speedlife.net/u/Vovchandr)\ **Post date:** [October 13, 2010, 5:30am UTC](https://forums.speedlife.net/t/wtb-small-truck-tool-box/254981/14 "2010-10-13T05:30:06Z")
Ok sounds good. ---
**Author:** ![Vovchandr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/vovchandr/32/6275_2.png) [@Vovchandr](https://forums.speedlife.net/u/Vovchandr)\ **Post date:** [October 14, 2010, 7:17am UTC](https://forums.speedlife.net/t/wtb-small-truck-tool-box/254981/15 "2010-10-14T07:17:24Z")
I was just thinking about this, but you could even add spacers out of 2x4’s or similar for the bed - about 2 inches and you won’t have to cut the bed liner. Easy fix. ---
**Author:** ![vcforlife15](https://avatars.discourse-cdn.com/v4/letter/v/e480ec/32.png) [@vcforlife15](https://forums.speedlife.net/u/vcforlife15)\ **Post date:** [October 14, 2010, 11:19am UTC](https://forums.speedlife.net/t/wtb-small-truck-tool-box/254981/16 "2010-10-14T11:19:22Z")
> [@FS: gas powered rc truck](https://forums.speedlife.net/t/fs-gas-powered-rc-truck/32973/7): > > I was just thinking about this, but you could even add spacers out of 2x4’s or similar for the bed - about 2 inches and you won’t have to cut the bed liner. Easy fix. That’s actually the same thought i had, but i think it would look like compolete crap. Rather just cut the liner