# WTB: sr20 oxygen sensor

**URL:** https://forums.speedlife.net/t/wtb-sr20-oxygen-sensor/90005
**Category:** Classifieds
**Created:** [November 4, 2005, 12:27pm UTC](https://forums.speedlife.net/t/wtb-sr20-oxygen-sensor/90005 "2005-11-04T12:27:17Z")
**Posts on this page:** 5
**Page:** 1

<div class="post-metadata">

### Author: ![johnny240](https://avatars.discourse-cdn.com/v4/letter/j/2bfe46/32.png) [@johnny240](https://forums.speedlife.net/u/johnny240)
#### Post date: [November 4, 2005, 12:27pm UTC](https://forums.speedlife.net/t/wtb-sr20-oxygen-sensor/90005/1 "2005-11-04T12:27:17Z")

</div>

it has to be the fat-type to fit into the megan racing extension…thanks

---

<div class="post-metadata">

### Author: ![Jedi\_Car\_Fan](https://avatars.discourse-cdn.com/v4/letter/j/b9e5f3/32.png) [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)
#### Post date: [November 4, 2005, 1:41pm UTC](https://forums.speedlife.net/t/wtb-sr20-oxygen-sensor/90005/2 "2005-11-04T13:41:52Z")

</div>

Napa… o2 from a Z32

Or you can just drill a hole, weld on a nut and use the skinny o2 which is frmo the Z31 😉

---

<div class="post-metadata">

### Author: ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)
#### Post date: [November 4, 2005, 1:47pm UTC](https://forums.speedlife.net/t/wtb-sr20-oxygen-sensor/90005/3 "2005-11-04T13:47:02Z")

</div>

Invest the $350 Now and get a wide band

---

<div class="post-metadata">

### Author: ![Jedi\_Car\_Fan](https://avatars.discourse-cdn.com/v4/letter/j/b9e5f3/32.png) [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)
#### Post date: [November 4, 2005, 1:59pm UTC](https://forums.speedlife.net/t/wtb-sr20-oxygen-sensor/90005/4 "2005-11-04T13:59:34Z")

</div>

> [@Benson240sx](#):
>
> Invest the $350 Now and get a wide band

Good Call 😉

“helps up” 2004/2005 Maxima has a 5 wire wideband o2… “same unit from bosch that 3/4 of all the company’s use for their kits”

Even just hooked up to a normal air/fuel gauge will give a way better reading then a narrowband o2…

If you can figure out how to convert the Volt Reading into an Air/Fuel ratio then you can just use a Wideband o2 + Multi Meter 😉

---

<div class="post-metadata">

### Author: ![Axlerod](https://avatars.discourse-cdn.com/v4/letter/a/8edcca/32.png) [@Axlerod](https://forums.speedlife.net/u/Axlerod)
#### Post date: [November 4, 2005, 2:23pm UTC](https://forums.speedlife.net/t/wtb-sr20-oxygen-sensor/90005/5 "2005-11-04T14:23:59Z")

</div>

I have one from a redtop… not sure if that’s the right kind.
