# WTB:stock evo internals
**URL:** https://forums.speedlife.net/t/wtb-stock-evo-internals/240451
**Category:** Classifieds
**Created:** [November 28, 2008, 7:37pm UTC](https://forums.speedlife.net/t/wtb-stock-evo-internals/240451 "2008-11-28T19:37:10Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@xreaction](https://forums.speedlife.net/u/xreaction)
#### Post date: [November 28, 2008, 7:37pm UTC](https://forums.speedlife.net/t/wtb-stock-evo-internals/240451/1 "2008-11-28T19:37:10Z")
basically looking for evo 8/9 pistons,rods.
:giggedy
---
### Author:  [@tdi\_logik](https://forums.speedlife.net/u/tdi_logik)
#### Post date: [November 28, 2008, 7:59pm UTC](https://forums.speedlife.net/t/wtb-stock-evo-internals/240451/2 "2008-11-28T19:59:47Z")
if you’re already in the why don’t you get some eagles or somethin…
---
### Author:  [@xreaction](https://forums.speedlife.net/u/xreaction)
#### Post date: [November 28, 2008, 9:37pm UTC](https://forums.speedlife.net/t/wtb-stock-evo-internals/240451/3 "2008-11-28T21:37:15Z")
> [@30r\_logik](#):
>
> if you’re already in the why don’t you get some eagles or somethin…
my goal is around 350 :nod
no need for forged internals
evo internals are good to about 400~450
---
### Author:  [@Celtic1982citleC](https://forums.speedlife.net/u/Celtic1982citleC)
#### Post date: [November 29, 2008, 6:35am UTC](https://forums.speedlife.net/t/wtb-stock-evo-internals/240451/4 "2008-11-29T06:35:20Z")
If you want Evo cams/valvesprings/retainers let me know :nod
---
### Author:  [@psi2high](https://forums.speedlife.net/u/psi2high)
#### Post date: [November 29, 2008, 8:25am UTC](https://forums.speedlife.net/t/wtb-stock-evo-internals/240451/5 "2008-11-29T08:25:33Z")
I don’t think evo cams will work on a 7bolt 4g63
---
### Author:  [@Boxersix](https://forums.speedlife.net/u/Boxersix)
#### Post date: [November 29, 2008, 12:54pm UTC](https://forums.speedlife.net/t/wtb-stock-evo-internals/240451/6 "2008-11-29T12:54:53Z")
Evolution 4g63 cams will fit into a 1/2 gen 4g63 head, however due to reversed head orientation on the Evo there’s some work that need to be done to make them function properly. CAS trigger mounting, window position, cam gear timing, etc, etc. You also have to degree in the cams when installing the timing components as the marks do not line up no matter what gears you use. They can work, but it’s often cheaper to just buy aftermarket cams, and more beneficial anyway.
Evo 8/9 bottom internals rated to 450whp safe at stock rev limit(~500whp has been stated though), anything over the stock rev limit and the rods/bolts get seriously stressed(big end distortion which leads to loss of oil pressure and big end failure). Stock rod bolts typically let go first though and ARP fasteners in the stock rods are a good investment.
I have a set of Evo 9 rods at the machine shop, but I’d have to check them for big end roundness before I’d say they’re good to go. Pistons I do not have, but you can get them on Evo M all day long. I have a few Evo 4g63 engine builds starting probably in mid Feb, so if you can wait till then I’ll have 3 sets of stock guts to choose from.
---
### Author:  [@xreaction](https://forums.speedlife.net/u/xreaction)
#### Post date: [November 29, 2008, 6:23pm UTC](https://forums.speedlife.net/t/wtb-stock-evo-internals/240451/7 "2008-11-29T18:23:18Z")
> [@Boxersix](#):
>
> Evolution 4g63 cams will fit into a 1/2 gen 4g63 head, however due to reversed head orientation on the Evo there’s some work that need to be done to make them function properly. CAS trigger mounting, window position, cam gear timing, etc, etc. You also have to degree in the cams when installing the timing components as the marks do not line up no matter what gears you use. They can work, but it’s often cheaper to just buy aftermarket cams, and more beneficial anyway.
>
> Evo 8/9 bottom internals rated to 450whp safe at stock rev limit(~500whp has been stated though), anything over the stock rev limit and the rods/bolts get seriously stressed(big end distortion which leads to loss of oil pressure and big end failure). Stock rod bolts typically let go first though and ARP fasteners in the stock rods are a good investment.
>
> I have a set of Evo 9 rods at the machine shop, but I’d have to check them for big end roundness before I’d say they’re good to go. Pistons I do not have, but you can get them on Evo M all day long. I have a few Evo 4g63 engine builds starting probably in mid Feb, so if you can wait till then I’ll have 3 sets of stock guts to choose from.
:bowdown
good to hear!
yeah my engine is still in excellent condition so i prolly wont NEED it until next year but i have a spare 7bolt longblock so im just looking at options
let me know when you get hands on those pistons and rods ill snatch them off you asap! :nod
> [@Celtic1982citleC](#):
>
> If you want Evo cams/valvesprings/retainers let me know :nod
Valves, springs, retainers, guides and keepers are all the same with the DSM and EVO
---
### Author:  [@Mk4\_30R\_Ban](https://forums.speedlife.net/u/Mk4_30R_Ban)
#### Post date: [November 29, 2008, 6:28pm UTC](https://forums.speedlife.net/t/wtb-stock-evo-internals/240451/8 "2008-11-29T18:28:20Z")
you say you only want 350 or so hp, but really, if youre into the motor, its better to build it a little more than the initial goal, rather than have to build it again, because we all know. power is addictive, no matter what you have you always want more… if you ever buy Eagle anything, get them balanced.
i can talk to some people i know about stock 8/9 rods… but you cant beat(for an oem component build) some 1g Big rods with ARP hardware and a 2g 8.5:1 piston, clevite bearings, arp head studs and some HKS 272’s that combo is strong and will make good power too.
---
### Author:  [@xreaction](https://forums.speedlife.net/u/xreaction)
#### Post date: [November 29, 2008, 7:12pm UTC](https://forums.speedlife.net/t/wtb-stock-evo-internals/240451/9 "2008-11-29T19:12:28Z")
> [@Mk4 30R](#):
>
> you say you only want 350 or so hp, but really, if youre into the motor, its better to build it a little more than the initial goal, rather than have to build it again, because we all know. power is addictive, no matter what you have you always want more… if you ever buy Eagle anything, get them balanced.
>
> i can talk to some people i know about stock 8/9 rods… but you cant beat(for an oem component build) some 1g Big rods with ARP hardware and a 2g 8.5:1 piston, clevite bearings, arp head studs and some HKS 272’s that combo is strong and will make good power too.
that would be sweet! let me know if you know anyone with evo internals :nod yeah i have to agree with you. power is addictive :lol id love to pickup a 6bolt and build the crap out of it but it’ll take me ages to finish the build since money is an issue. i want this car to be very streetable and i probably wont reach 350 for another year or two. assuming my 7bolt holds up that long which i doubt :tong
and that setup you just mentioned seems to be very popular and cheap and again, im open to options but in a cheaper way :lol
---
### Author:  [@Mk4\_30R\_Ban](https://forums.speedlife.net/u/Mk4_30R_Ban)
#### Post date: [November 29, 2008, 10:10pm UTC](https://forums.speedlife.net/t/wtb-stock-evo-internals/240451/10 "2008-11-29T22:10:49Z")
a friend of mine out in washington just did an AMS 2liter and an HTA 35R on his evo, dont know if he wrecked the bottom end before or what happened, it used to be a buschur 20g, then an FP Red on stock bottom end. so it was pushed hard. ill talk to him and see if the rods are still good and if hes even got them still. if he does ill see what he wants and can pick them up since im heading out the washington for a little trip soon… 1G big rods are easy to find, my old roomate has a set laying around i can talk to him as well about them. i know hes got an entire 6 bolt setup hes trying to get rid of, issue is, he is in Orlando, Fl
---
### Author:  [@xreaction](https://forums.speedlife.net/u/xreaction)
#### Post date: [November 29, 2008, 10:55pm UTC](https://forums.speedlife.net/t/wtb-stock-evo-internals/240451/11 "2008-11-29T22:55:01Z")
> [@Mk4 30R](#):
>
> a friend of mine out in washington just did an AMS 2liter and an HTA 35R on his evo, dont know if he wrecked the bottom end before or what happened, it used to be a buschur 20g, then an FP Red on stock bottom end. so it was pushed hard. ill talk to him and see if the rods are still good and if hes even got them still. if he does ill see what he wants and can pick them up since im heading out the washington for a little trip soon… 1G big rods are easy to find, my old roomate has a set laying around i can talk to him as well about them. i know hes got an entire 6 bolt setup hes trying to get rid of, issue is, he is in Orlando, Fl
sweet man let me know! :banana :banana
---
### Author:  [@cazwrx187](https://forums.speedlife.net/u/cazwrx187)
#### Post date: [November 29, 2008, 11:02pm UTC](https://forums.speedlife.net/t/wtb-stock-evo-internals/240451/12 "2008-11-29T23:02:10Z")
DSM madness in this thread
---
### Author:  [@xreaction](https://forums.speedlife.net/u/xreaction)
#### Post date: [November 29, 2008, 11:06pm UTC](https://forums.speedlife.net/t/wtb-stock-evo-internals/240451/13 "2008-11-29T23:06:03Z")
> [@cazwrx187](#):
>
> DSM madness in this thread
gtfo scobby :hug
---
### Author:  [@cazwrx187](https://forums.speedlife.net/u/cazwrx187)
#### Post date: [November 29, 2008, 11:07pm UTC](https://forums.speedlife.net/t/wtb-stock-evo-internals/240451/14 "2008-11-29T23:07:02Z")
> [@xreaction122](#):
>
> gtfo scobby :hug
ahemmmmm
sco **ob** y
---
### Author:  [@Mk4\_30R\_Ban](https://forums.speedlife.net/u/Mk4_30R_Ban)
#### Post date: [November 29, 2008, 11:08pm UTC](https://forums.speedlife.net/t/wtb-stock-evo-internals/240451/15 "2008-11-29T23:08:45Z")
> [@cazwrx187](#):
>
> ahemmmmm
>
> sco **ob** y
scooby, scobby, whatever way you choose to spell it, in the end YOU ARE still a fag. :banana
---
### Author:  [@xreaction](https://forums.speedlife.net/u/xreaction)
#### Post date: [November 29, 2008, 11:11pm UTC](https://forums.speedlife.net/t/wtb-stock-evo-internals/240451/16 "2008-11-29T23:11:21Z")
> [@Mk4 30R](#):
>
> scooby, scobby, whatever way you choose to spell it, in the end YOU ARE still a fag. :banana
:rofl :🙂
---
### Author:  [@cazwrx187](https://forums.speedlife.net/u/cazwrx187)
#### Post date: [November 29, 2008, 11:13pm UTC](https://forums.speedlife.net/t/wtb-stock-evo-internals/240451/17 "2008-11-29T23:13:28Z")
> [@Mk4 30R](#):
>
> scooby, scobby, whatever way you choose to spell it, in the end YOU ARE still a fag. :banana
vw/foxbody fanboi gtfo :umm
Back on topic.
Jae are you putting these parts in the black car or your spare engine.
What the fux you gonna do with the yellow car? :rofl
---
### Author:  [@Mk4\_30R\_Ban](https://forums.speedlife.net/u/Mk4_30R_Ban)
#### Post date: [November 29, 2008, 11:16pm UTC](https://forums.speedlife.net/t/wtb-stock-evo-internals/240451/18 "2008-11-29T23:16:30Z")
> [@cazwrx187](#):
>
> vw/foxbody fanboi gtfo :umm
is that supposed to be some new type of highschool-esque insult?
i know the platforms well, whats the problem? i know alot about DSM’s, Supras and ST202-205 celicas too, whats the issue?
---
### Author:  [@xreaction](https://forums.speedlife.net/u/xreaction)
#### Post date: [November 29, 2008, 11:27pm UTC](https://forums.speedlife.net/t/wtb-stock-evo-internals/240451/19 "2008-11-29T23:27:38Z")
> [@cazwrx187](#):
>
> vw/foxbody fanboi gtfo :umm
>
> Back on topic.
> Jae are you putting these parts in the black car or your spare engine.
> What the fux you gonna do with the yellow car? :rofl
its going in my block out of my 95 gsx since the block+head is basically fresh
hot tanked,decked,3 angle valve job,porting,polished crank,etc. done like 9k before i said bye bye to the car :headbang
and for the yellow car…dont know dont care it can sit outside all day and i could care less :lol
---
### Author:  [@Hooked\_on\_240](https://forums.speedlife.net/u/Hooked_on_240)
#### Post date: [November 30, 2008, 5:34am UTC](https://forums.speedlife.net/t/wtb-stock-evo-internals/240451/20 "2008-11-30T05:34:19Z")
> [@xreaction122](#):
>
> its going in my block out of my 95 gsx since the block+head is basically fresh
> hot tanked,decked,3 angle valve job,porting,polished crank,etc. done like 9k before i said bye bye to the car :headbang
> and for the yellow car…dont know dont care it can sit outside all day and i could care less :lol
what is this said yeller car. i need teh dsm parts!
[Next page](https://forums.speedlife.net/t/wtb-stock-evo-internals/240451.md?page=2)