# WTF does my car have VTEC? **URL:** \ **Category:** SON240sx Automotive\ **Created:** [March 3, 2009, 9:45am UTC](https://forums.speedlife.net/t/wtf-does-my-car-have-vtec/122257 "2009-03-03T09:45:31Z")\ **Posts on this page:** 1\ **Showing post:** 30
**Author:** ![DA\_1](https://avatars.discourse-cdn.com/v4/letter/d/ba8739/32.png) [@DA\_1](https://forums.speedlife.net/u/DA_1)\ **Post date:** [March 4, 2009, 9:08pm UTC](https://forums.speedlife.net/t/wtf-does-my-car-have-vtec/122257/30 "2009-03-04T21:08:04Z")
> [@Corvette / F-body guys. . .need help](https://forums.speedlife.net/t/corvette-f-body-guys-need-help/20627/6): > > DA 1 and SRI Motorsports, > > Could I get some pics and info as well? I’m looking to build a 280-320 ft-lbs SOHC KA (notice I put ft-lbs instead of HP? I’m aiming for around that kind of torque figure). I’ve got the bottom end all planned out, but any recommendations will for greatly welcome. I’ve got plans on running a T25 for the meantime, then running a GT2860RS. > > PM me or send me an email here: mnietes01 at gmail dot com > > Thanks a lot > > - Mik > > EDIT: R33, I’m terribly sorry for the threadjack. 300-350 torque is mad easy on a single cam ka,i seen that u said uv got the bottom end planned out but here is my advice: put in forged pistons,you can leave the stock rods alone or just get them shortpinned, arp rod bolts,stock main bolts are fine,cosmetic head gasket,arp headbolts t28 turbo 550cc injectors( obviously frontmount walbro,z32 maf,etc). i got news for you… 2.5 inch intercooler piping and 2.5 mandrel bent exhaust is perfect you dont even have to port the head for that power just get sri motorsports to refresh it with new valveseals, 3/5 angle valve job n ur good to go, if u want treat it with a cam,(just because u only got to buy 1 lol)head porting is good dont get me wrong but not necessary for ur goal.just remember to spend the money where its absolutely needed and most of all keep things simple. here is what should be on ur must have list,very good rad, swap in an SR clutch fan keep the oem shroud,(modify ur oil pan to hold more oil about a liter more is fine,put in a new oil pump if u can afford too)also a good OIL COOLER is a must for any ka and keep it tuned well(a wideband should be ur best friend).ur power n torque will be almost on par… trust me try this combo n see ur results bud… i will leave u to chose ur ecu/standalone so many to chose! you will have a very reliable rock solid ka… thats it! let me know if u need a hand… DAN that goes for u too lol --- _[View the full topic](https://forums.speedlife.net/t/wtf-does-my-car-have-vtec/122257)._