# WTH: Auto Tech

**URL:** <https://forums.speedlife.net/t/wth-auto-tech/8955>\
**Category:** Classifieds\
**Created:** [March 6, 2006, 2:44pm UTC](https://forums.speedlife.net/t/wth-auto-tech/8955 "2006-03-06T14:44:30Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![RacerX](https://avatars.discourse-cdn.com/v4/letter/r/5e9695/32.png) [@RacerX](https://forums.speedlife.net/u/RacerX)\
**Post date:** [March 6, 2006, 2:44pm UTC](https://forums.speedlife.net/t/wth-auto-tech/8955/1 "2006-03-06T14:44:30Z")

</div>

We’re looking to hire a new tech at the shop I work at. It’s on Walden in Depew. Newer building very clean. We don’t get many rotted out junkers in there. My boss is very good about purchasing anything the shop may need. Must have your own tools. We have the GM tech 2 with TIS 2000 software and CANdi adaptor, Chrysler DRB III, Ford NGS with CAN update, as well as the Snap-On MT 2500 fully updated w/ CAN adaptor. We use a John Bean laser alignment machine. The shop is always clean and warm, we use an oil burner to heat the shop so the boss never whines about heat. For more info or to schedule an interview call Licata’s Auto Service at 651-9050

---

<div class="post-metadata">

**Author:** ![HotRodKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/hotrodkid/32/7609_2.png) [@HotRodKid](https://forums.speedlife.net/u/HotRodKid)\
**Post date:** [March 6, 2006, 2:53pm UTC](https://forums.speedlife.net/t/wth-auto-tech/8955/2 "2006-03-06T14:53:17Z")

</div>

fuck, i need a job but im a collision tech, not a service tech …

not that i cant do service type stuff, but i donno how to run all the electronic shat

---

<div class="post-metadata">

**Author:** ![99\_civic\_si](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/99_civic_si/32/7319_2.png) [@99\_civic\_si](https://forums.speedlife.net/u/99_civic_si)\
**Post date:** [March 6, 2006, 3:44pm UTC](https://forums.speedlife.net/t/wth-auto-tech/8955/3 "2006-03-06T15:44:38Z")

</div>

hmmmm, part time available?

---

<div class="post-metadata">

**Author:** ![RacerX](https://avatars.discourse-cdn.com/v4/letter/r/5e9695/32.png) [@RacerX](https://forums.speedlife.net/u/RacerX)\
**Post date:** [March 6, 2006, 9:45pm UTC](https://forums.speedlife.net/t/wth-auto-tech/8955/4 "2006-03-06T21:45:09Z")

</div>

Don’t worry about being able to operate all of the scan tools. Not to many people would be able to work all of them right away. We also have a collision shop here so your collision experience may help you out. We’re looking for a full time tech sorry no part-time. By the way the hours are Mon-Fri 8-5

---

<div class="post-metadata">

**Author:** ![dirtye30](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dirtye30/32/7333_2.png) [@dirtye30](https://forums.speedlife.net/u/dirtye30)\
**Post date:** [March 7, 2006, 4:49am UTC](https://forums.speedlife.net/t/wth-auto-tech/8955/5 "2006-03-07T04:49:30Z")

</div>

must be ASE cert?

---

<div class="post-metadata">

**Author:** ![RacerX](https://avatars.discourse-cdn.com/v4/letter/r/5e9695/32.png) [@RacerX](https://forums.speedlife.net/u/RacerX)\
**Post date:** [March 7, 2006, 4:55am UTC](https://forums.speedlife.net/t/wth-auto-tech/8955/6 "2006-03-07T04:55:49Z")

</div>

no