# yamaha blaster cutting out **URL:** \ **Category:** PittSpeed Automotive\ **Created:** [October 16, 2007, 3:00pm UTC](https://forums.speedlife.net/t/yamaha-blaster-cutting-out/193081 "2007-10-16T15:00:47Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![GNocide](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gnocide/32/5947_2.png) [@GNocide](https://forums.speedlife.net/u/GNocide)\ **Post date:** [October 16, 2007, 3:00pm UTC](https://forums.speedlife.net/t/yamaha-blaster-cutting-out/193081/1 "2007-10-16T15:00:47Z")
help i have a 92 blaster it starts and runs great but when it get up to operating temp the revs cut out and backfire and there is no power the rev limiter is already removed from the throttle and unplugged from the front does any one know about the coil/spark control or carbs on these? ---
**Author:** ![eurodad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/eurodad/32/5988_2.png) [@eurodad](https://forums.speedlife.net/u/eurodad)\ **Post date:** [October 16, 2007, 3:29pm UTC](https://forums.speedlife.net/t/yamaha-blaster-cutting-out/193081/2 "2007-10-16T15:29:32Z")
your description is very vague. does it run fine a low rpm like if you were just putting around the yard but when you accelerate it cuts out? or does it barely run/idle? #1 put a fresh plug in it. #2 if that doesn’t fix it pull the carb off and clean it making sure the jets are not plugged especially the main jet. could be some other things but without hearing more details i don’t know ---
**Author:** ![GNocide](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gnocide/32/5947_2.png) [@GNocide](https://forums.speedlife.net/u/GNocide)\ **Post date:** [October 16, 2007, 3:32pm UTC](https://forums.speedlife.net/t/yamaha-blaster-cutting-out/193081/3 "2007-10-16T15:32:34Z")
> [@eurodad"](#): > > - it runs fine a low rpm like if you were just putting around the yard but when you accelerate it cuts out? \* > > #2 if that doesn’t fix it pull the carb off and clean it making sure the jets are not plugged especially the main jet. > > could be some other things but without hearing more details i don’t know have not done a plug but have pulled the carb because of oil leak around bowl- cleaned it and the reeds put it back - no difference kinda why i think its electrical what other things\> ---
**Author:** ![eurodad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/eurodad/32/5988_2.png) [@eurodad](https://forums.speedlife.net/u/eurodad)\ **Post date:** [October 16, 2007, 4:14pm UTC](https://forums.speedlife.net/t/yamaha-blaster-cutting-out/193081/4 "2007-10-16T16:14:52Z")
> [@Little Excel help here](https://forums.speedlife.net/t/little-excel-help-here/33024/8): > > have not done a plug but have pulled the carb because of oil leak around bowl- cleaned it and the reeds > put it back - no difference > > kinda why i think its electrical > what other things\> you still didn’t answer my question. a bad plug could make it pop and backfire or not rev right. ---
**Author:** ![imported\_Sleeper](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_sleeper/32/5939_2.png) [@imported\_Sleeper](https://forums.speedlife.net/u/imported_Sleeper)\ **Post date:** [October 16, 2007, 4:45pm UTC](https://forums.speedlife.net/t/yamaha-blaster-cutting-out/193081/5 "2007-10-16T16:45:58Z")
John, sounds like a bad plug man, easy fix and i had probs like that too. ---
**Author:** ![GNocide](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gnocide/32/5947_2.png) [@GNocide](https://forums.speedlife.net/u/GNocide)\ **Post date:** [October 16, 2007, 6:12pm UTC](https://forums.speedlife.net/t/yamaha-blaster-cutting-out/193081/6 "2007-10-16T18:12:02Z")
> [@\*\*\*\*\*Official: Mighty Meet Thread\*\*\*\*\*](https://forums.speedlife.net/t/official-mighty-meet-thread/10918/2280): > > you still didn’t answer my question. > > a bad plug could make it pop and backfire or not rev right. ill try the plug and get back to you ---
**Author:** ![SP71Supra](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sp71supra/32/5955_2.png) [@SP71Supra](https://forums.speedlife.net/u/SP71Supra)\ **Post date:** [October 18, 2007, 10:33am UTC](https://forums.speedlife.net/t/yamaha-blaster-cutting-out/193081/7 "2007-10-18T10:33:40Z")
try the plug… I had a lil blaster like 2 years ago, it had an electrical problem, turned out there was a wire inside the stator that was broken off… fixed it and she ran like a champ… well until Wags blew it up! ---
**Author:** ![GNocide](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gnocide/32/5947_2.png) [@GNocide](https://forums.speedlife.net/u/GNocide)\ **Post date:** [October 18, 2007, 2:00pm UTC](https://forums.speedlife.net/t/yamaha-blaster-cutting-out/193081/8 "2007-10-18T14:00:34Z")
it was the plug all along !!!:weak: thanks guys:bigthumb: ---
**Author:** ![imported\_Sleeper](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_sleeper/32/5939_2.png) [@imported\_Sleeper](https://forums.speedlife.net/u/imported_Sleeper)\ **Post date:** [October 19, 2007, 6:23am UTC](https://forums.speedlife.net/t/yamaha-blaster-cutting-out/193081/9 "2007-10-19T06:23:55Z")
> [@Towne Hyundai of Orchard Park, "Stupid Move!"](https://forums.speedlife.net/t/towne-hyundai-of-orchard-park-stupid-move/33076/7): > > it was the plug all along !!!:weak: > > thanks guys:bigthumb: Duh! :rolleyes: Good to see it was an easy fix John:op: ---
**Author:** ![GNocide](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gnocide/32/5947_2.png) [@GNocide](https://forums.speedlife.net/u/GNocide)\ **Post date:** [October 19, 2007, 12:38pm UTC](https://forums.speedlife.net/t/yamaha-blaster-cutting-out/193081/10 "2007-10-19T12:38:43Z")
> [@Create A Simpson's Version of You.](https://forums.speedlife.net/t/create-a-simpsons-version-of-you/33082/16): > > Duh! :rolleyes: Good to see it was an easy fix John:op: me too i was down for a week but it felt like 3 months