# You Have AN fittings and Braided Line?

**URL:** <https://forums.speedlife.net/t/you-have-an-fittings-and-braided-line/3544>\
**Category:** NYSpeed Automotive\
**Created:** [October 18, 2005, 4:42pm UTC](https://forums.speedlife.net/t/you-have-an-fittings-and-braided-line/3544 "2005-10-18T16:42:16Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Choda](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/choda/32/7347_2.png) [@Choda](https://forums.speedlife.net/u/Choda)\
**Post date:** [October 18, 2005, 4:42pm UTC](https://forums.speedlife.net/t/you-have-an-fittings-and-braided-line/3544/1 "2005-10-18T16:42:16Z")

</div>

so in hope of goin to NYI and not being sent home for “unsafe” car, i started ditching my rubber hose and replacing it with the “correct” pieces

two 90\* 3/8 -\> -06 fittings  
two -06 straight couplings  
two 4150 carb -\> -06 fitting  
2’ -06 of braided hose  
total =  
~82 bucks, with a no tax deal

WTF , THIS WAS ONLY FROM THE REGULATOR TO THE CARB, this shit is crazy, good thing i didnt fuck up any of my cuts, measuring, connecting of the lines and fittings. and even with tons of tape/rags around the “nuts” they still got lil scratches from the wrenches and vise.

after seeing some peoples setups (addicted2boost and slow5.0) there shit must have been well over a grand.

tomarrow ill take some pics of mine, i wanna see some of urs, and how much it cost ya

---

<div class="post-metadata">

**Author:** ![Studderin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/studderin/32/7197_2.png) [@Studderin](https://forums.speedlife.net/u/Studderin)\
**Post date:** [October 18, 2005, 6:17pm UTC](https://forums.speedlife.net/t/you-have-an-fittings-and-braided-line/3544/2 "2005-10-18T18:17:22Z")

</div>

Ya that dose suck.  
Couldn’t you just use 3/8 steel line, double flare the ends. And use that type fittings? Not at pimp… lol  
Just use some braided for the engine movment, I think NHRA/IHRA your only aloud 12inchs of rubber line in the intire fuel system.

Oh CarCraft, had a artical on cutting the braided line resently. Said a sharp chisle, on a block of alum. And one BFH makes great cuts.

---

<div class="post-metadata">

**Author:** ![Onyx\_Z32](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/onyx_z32/32/7581_2.png) [@Onyx\_Z32](https://forums.speedlife.net/u/Onyx_Z32)\
**Post date:** [October 18, 2005, 6:24pm UTC](https://forums.speedlife.net/t/you-have-an-fittings-and-braided-line/3544/3 "2005-10-18T18:24:52Z")

</div>

addicted2boost has 1" of AN for every week his car has been away… 🙂

---

<div class="post-metadata">

**Author:** ![Adictd2b00st](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/adictd2b00st/32/7625_2.png) [@Adictd2b00st](https://forums.speedlife.net/u/Adictd2b00st)\
**Post date:** [October 18, 2005, 6:35pm UTC](https://forums.speedlife.net/t/you-have-an-fittings-and-braided-line/3544/4 "2005-10-18T18:35:16Z")

</div>

ugh, u don’t wanna know how much $ i’ve spend on braided line and -an fittings… lol

---

<div class="post-metadata">

**Author:** ![Viper966](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/viper966/32/7268_2.png) [@Viper966](https://forums.speedlife.net/u/Viper966)\
**Post date:** [October 18, 2005, 7:17pm UTC](https://forums.speedlife.net/t/you-have-an-fittings-and-braided-line/3544/5 "2005-10-18T19:17:24Z")

</div>

i spent almost 250 bux on an lines and fittings;

such a racket