# Z06 BUILD DONE!!??.... **URL:** \ **Category:** Shift518 Automotive\ **Created:** [June 19, 2013, 4:05am UTC](https://forums.speedlife.net/t/z06-build-done/267247 "2013-06-19T04:05:23Z")\ **Posts on this page:** 20\ **Page:** 2
**Author:** ![Mike3](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mike3/32/6350_2.png) [@Mike3](https://forums.speedlife.net/u/Mike3)\ **Post date:** [June 19, 2013, 3:45pm UTC](https://forums.speedlife.net/t/z06-build-done/267247/21 "2013-06-19T15:45:15Z")
Superchargers are useless. ---
**Author:** ![pitman](https://avatars.discourse-cdn.com/v4/letter/p/4da419/32.png) [@pitman](https://forums.speedlife.net/u/pitman)\ **Post date:** [June 20, 2013, 12:59am UTC](https://forums.speedlife.net/t/z06-build-done/267247/22 "2013-06-20T00:59:33Z")
can you order a cogged belt kit? or is it like this? [http://forums.corvetteforum.com/c6-z06-discussion/3039850-e-force-supercharger-drive-belt-problems.html](http://forums.corvetteforum.com/c6-z06-discussion/3039850-e-force-supercharger-drive-belt-problems.html) ---
**Author:** ![deadbeatrec](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deadbeatrec/32/6401_2.png) [@deadbeatrec](https://forums.speedlife.net/u/deadbeatrec)\ **Post date:** [June 20, 2013, 4:29am UTC](https://forums.speedlife.net/t/z06-build-done/267247/23 "2013-06-20T04:29:11Z")
> [@99 s10 engine conversion](https://forums.speedlife.net/t/99-s10-engine-conversion/52429/29): > > so they dynoed it in na form to break in the motor? how many cubes is it now? no the motor was broke in already. it was on the dyno to my knowledge and he was doing all the midrange tuning etc. then he went to make a pull and the belt snapped. went and looked at the logs and there was no boost yet but the car had made 512 at 5400 rpm. so its getting a new fresh belt and if that doesnt work ill either have to get an 8 rib or do something with the tensioner. problem is the 8 rib kit is like $1000 or something stupid. fml ---
**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\ **Post date:** [June 20, 2013, 4:47am UTC](https://forums.speedlife.net/t/z06-build-done/267247/24 "2013-06-20T04:47:48Z")
Car was on dyno as I strapped it down on it cause Anthony couldn’t . Ill be on it this weakend I’m also gonna make sure it’s not a alignment issue ---
**Author:** ![bennyfizzle](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bennyfizzle/32/6291_2.png) [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)\ **Post date:** [June 20, 2013, 4:47am UTC](https://forums.speedlife.net/t/z06-build-done/267247/25 "2013-06-20T04:47:51Z")
no boost at 5400 rpm? ---
**Author:** ![deadbeatrec](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deadbeatrec/32/6401_2.png) [@deadbeatrec](https://forums.speedlife.net/u/deadbeatrec)\ **Post date:** [June 20, 2013, 5:28am UTC](https://forums.speedlife.net/t/z06-build-done/267247/26 "2013-06-20T05:28:49Z")
belt snapped ben ---
**Author:** ![deadbeatrec](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deadbeatrec/32/6401_2.png) [@deadbeatrec](https://forums.speedlife.net/u/deadbeatrec)\ **Post date:** [June 20, 2013, 5:29am UTC](https://forums.speedlife.net/t/z06-build-done/267247/27 "2013-06-20T05:29:21Z")
im going to call ECS today and see what they think ---
**Author:** ![ninety1two40](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ninety1two40/32/6332_2.png) [@ninety1two40](https://forums.speedlife.net/u/ninety1two40)\ **Post date:** [June 20, 2013, 6:01am UTC](https://forums.speedlife.net/t/z06-build-done/267247/28 "2013-06-20T06:01:02Z")
Convert to roller chain :lol ---
**Author:** ![bennyfizzle](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bennyfizzle/32/6291_2.png) [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)\ **Post date:** [June 20, 2013, 6:13am UTC](https://forums.speedlife.net/t/z06-build-done/267247/29 "2013-06-20T06:13:21Z")
> [@slow leak](https://forums.speedlife.net/t/slow-leak/53014/9): > > belt snapped ben right but the belt snapped at 5400 rpm and you still hadnt made boost? ---
**Author:** ![deadbeatrec](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deadbeatrec/32/6401_2.png) [@deadbeatrec](https://forums.speedlife.net/u/deadbeatrec)\ **Post date:** [June 20, 2013, 6:44am UTC](https://forums.speedlife.net/t/z06-build-done/267247/30 "2013-06-20T06:44:46Z")
> [@Straightening out a miata. Updates always in post 1.](https://forums.speedlife.net/t/straightening-out-a-miata-updates-always-in-post-1/42443/63): > > right but the belt snapped at 5400 rpm and you still hadnt made boost? i have no idea when it snapped. i dont know if this was full throttle. i was just given this small tid bit of info over a 2 min conversation with tony. ---
**Author:** ![bennyfizzle](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bennyfizzle/32/6291_2.png) [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)\ **Post date:** [June 20, 2013, 6:58am UTC](https://forums.speedlife.net/t/z06-build-done/267247/31 "2013-06-20T06:58:59Z")
sounds suspicious ---
**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\ **Post date:** [June 20, 2013, 7:07am UTC](https://forums.speedlife.net/t/z06-build-done/267247/32 "2013-06-20T07:07:12Z")
Was only roughly 3/4 throttle he was trying to scale the injectors for the midrange . He prolly had a little boost at that point but when it started boosting the belt broke . He don’t have huge boost pulleys so it won’t come on till higher rpms ---
**Author:** ![bennyfizzle](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bennyfizzle/32/6291_2.png) [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)\ **Post date:** [June 20, 2013, 8:18am UTC](https://forums.speedlife.net/t/z06-build-done/267247/33 "2013-06-20T08:18:40Z")
so its not 512whp n/a op is a big phony ---
**Author:** ![sbardy](https://avatars.discourse-cdn.com/v4/letter/s/8edcca/32.png) [@sbardy](https://forums.speedlife.net/u/sbardy)\ **Post date:** [June 20, 2013, 8:41am UTC](https://forums.speedlife.net/t/z06-build-done/267247/34 "2013-06-20T08:41:56Z")
> [@Straightening out a miata. Updates always in post 1.](https://forums.speedlife.net/t/straightening-out-a-miata-updates-always-in-post-1/42443/63): > > right but the belt snapped at 5400 rpm and you still hadnt made boost? Superchargers don’t make boost till 6k nowadays. Instant boost isn’t the point of a supercharger anymore. ---
**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\ **Post date:** [June 20, 2013, 9:14am UTC](https://forums.speedlife.net/t/z06-build-done/267247/35 "2013-06-20T09:14:41Z")
When the belt is slipping it ain’t gonna boost ya herb lol ---
**Author:** ![deadbeatrec](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deadbeatrec/32/6401_2.png) [@deadbeatrec](https://forums.speedlife.net/u/deadbeatrec)\ **Post date:** [June 20, 2013, 9:29am UTC](https://forums.speedlife.net/t/z06-build-done/267247/36 "2013-06-20T09:29:25Z")
john…where are u getting this info from? lol i think your making it up as this thread goes along ---
**Author:** ![GermanPSI](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/germanpsi/32/6353_2.png) [@GermanPSI](https://forums.speedlife.net/u/GermanPSI)\ **Post date:** [June 20, 2013, 9:58am UTC](https://forums.speedlife.net/t/z06-build-done/267247/37 "2013-06-20T09:58:26Z")
So it made how much in reverse? ---
**Author:** ![deadbeatrec](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deadbeatrec/32/6401_2.png) [@deadbeatrec](https://forums.speedlife.net/u/deadbeatrec)\ **Post date:** [June 20, 2013, 10:08am UTC](https://forums.speedlife.net/t/z06-build-done/267247/38 "2013-06-20T10:08:14Z")
just talked to Chris at ECS and he doesnt think its going to make any more than 600 tire haha. i was like um chris i made 620 on my 346 no problems. but either way with the current pully i do not have to go to an 8 rib. if i wanted to, id do a direct drive and it would cost me about $2000. so i guess lets see what the car makes as is. if it doesnt make at least 700 to the tire on pump gas im going to be one livid mother fucker! ---
**Author:** ![bennyfizzle](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bennyfizzle/32/6291_2.png) [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)\ **Post date:** [June 20, 2013, 11:35am UTC](https://forums.speedlife.net/t/z06-build-done/267247/39 "2013-06-20T11:35:03Z")
> [@Totalled car Updated pics](https://forums.speedlife.net/t/totalled-car-updated-pics/52905/65): > > Superchargers don’t make boost till 6k nowadays. > > Instant boost isn’t the point of a supercharger anymore. I know how centri superchargers work, faggot, and he should definitely be seeng positive pressure 2/3 of the way through his fucking rev range. And TS chargers do make boost instantly \*\*\*\*\*\* ---
**Author:** ![Eatonualive](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/eatonualive/32/6442_2.png) [@Eatonualive](https://forums.speedlife.net/u/Eatonualive)\ **Post date:** [June 20, 2013, 12:50pm UTC](https://forums.speedlife.net/t/z06-build-done/267247/40 "2013-06-20T12:50:53Z")
tis true. if it wasnt making boost by 5400 rpms, then there is a problem. this is of course, based on the info in the tread… which I have no clue if it is accurate lol. but boost should have been had. what are you revving to eman? 7k? how much boost is it pullied for? [Previous page](https://forums.speedlife.net/t/z06-build-done/267247.md?page=1) [Next page](https://forums.speedlife.net/t/z06-build-done/267247.md?page=3)