# Z28LT1Rocket combined nonsense thread **URL:** \ **Category:** Shift518 Off Topic\ **Created:** [May 6, 2009, 1:46pm UTC](https://forums.speedlife.net/t/z28lt1rocket-combined-nonsense-thread/244002 "2009-05-06T13:46:39Z")\ **Posts on this page:** 1\ **Showing post:** 140
**Author:** ![Murrdog9000](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/murrdog9000/32/6391_2.png) [@Murrdog9000](https://forums.speedlife.net/u/Murrdog9000)\ **Post date:** [May 17, 2009, 9:47pm UTC](https://forums.speedlife.net/t/z28lt1rocket-combined-nonsense-thread/244002/140 "2009-05-17T21:47:50Z")
> [@FS BMW Cross Drilled rotors and pads](https://forums.speedlife.net/t/fs-bmw-cross-drilled-rotors-and-pads/18232/3): > > next project!! a serious LT1 making 650hp+ this is gonna take some time because of $$$ or lack of it but will kick ass when done heres my plans… > > 350ci block: > 8.0- 8.8 to 1 compression > forged 3.48 stroke crank (stock lenght) > .040 forged pistons (floating) > forged scat h beam rods > solid roller > custom blower cam with; > 260int dur @ .05 (outrageous amount of duration) > 265exh dur @.05 > .610int and 630 exh lift 110 LSA and a 106 center line very radical cam but so it can turn 7500rpms+ (also why mech cam) > weiand 925 7530 high rise intake with a intake elbow going to a 90mm accufab LS2 tb > > running a minimum of 15 psi prolly 25! and AFR 1507 head flowing 210cc runners flowing 350cfm @ 600 and the cams more due to loss lift because of valvetrain lash > > prolly run me 7000$ when im done but this is a serious project and will take a real long time so dont get anxious!!!:wierd:ahh Why don’t you worry about the appearance of the car first, its horrible. Your supercharger plans will probably cost wayyyy more than 7k, therefore I doubt this plan will ever materialize. --- _[View the full topic](https://forums.speedlife.net/t/z28lt1rocket-combined-nonsense-thread/244002)._