# z32 30mm caliper question?? **URL:** \ **Category:** SON240sx Automotive\ **Created:** [May 10, 2006, 1:05pm UTC](https://forums.speedlife.net/t/z32-30mm-caliper-question/95783 "2006-05-10T13:05:55Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![modded](https://avatars.discourse-cdn.com/v4/letter/m/43a26b/32.png) [@modded](https://forums.speedlife.net/u/modded)\ **Post date:** [May 10, 2006, 1:05pm UTC](https://forums.speedlife.net/t/z32-30mm-caliper-question/95783/1 "2006-05-10T13:05:55Z")
I was wondering if u go with the 30mm caliper in the front with the 11 inch rotor… will it clear my 15in stock wheel on a 91 coupe?? rotors are re drilled 4 bolt ---
**Author:** ![lewtz](https://avatars.discourse-cdn.com/v4/letter/l/439d5e/32.png) [@lewtz](https://forums.speedlife.net/u/lewtz)\ **Post date:** [May 11, 2006, 9:44am UTC](https://forums.speedlife.net/t/z32-30mm-caliper-question/95783/2 "2006-05-11T09:44:32Z")
no it wont, the 7 spokes can clear the 26mm z32 calipers, but not the 30mm ---
**Author:** ![GT1](https://avatars.discourse-cdn.com/v4/letter/g/b5e925/32.png) [@GT1](https://forums.speedlife.net/u/GT1)\ **Post date:** [May 11, 2006, 10:39am UTC](https://forums.speedlife.net/t/z32-30mm-caliper-question/95783/3 "2006-05-11T10:39:26Z")
that is correct actually and i appologize to marc for saying he was wrong. however a 5mm spacer that requires no stud modification… will allow everything to fit. GT ---
**Author:** ![modded](https://avatars.discourse-cdn.com/v4/letter/m/43a26b/32.png) [@modded](https://forums.speedlife.net/u/modded)\ **Post date:** [May 11, 2006, 12:20pm UTC](https://forums.speedlife.net/t/z32-30mm-caliper-question/95783/4 "2006-05-11T12:20:03Z")
thanks… but that is 100% ---
**Author:** ![modded](https://avatars.discourse-cdn.com/v4/letter/m/43a26b/32.png) [@modded](https://forums.speedlife.net/u/modded)\ **Post date:** [May 11, 2006, 9:39pm UTC](https://forums.speedlife.net/t/z32-30mm-caliper-question/95783/5 "2006-05-11T21:39:40Z")
what extra parts are need besides 300zx calipers/lines?? ---
**Author:** ![a\_ahmed](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/a_ahmed/32/5411_2.png) [@a\_ahmed](https://forums.speedlife.net/u/a_ahmed)\ **Post date:** [May 11, 2006, 10:11pm UTC](https://forums.speedlife.net/t/z32-30mm-caliper-question/95783/6 "2006-05-11T22:11:59Z")
Are you converting the rear too? If you are, and if you want the e-brake to work you need the full e-brake assembly and uncut wires in the rear. You might want to get the 300zx master brake cylinder too… as the stock one will kind of suck, pushing so many more cylinders. ---
**Author:** ![modded](https://avatars.discourse-cdn.com/v4/letter/m/43a26b/32.png) [@modded](https://forums.speedlife.net/u/modded)\ **Post date:** [May 11, 2006, 10:14pm UTC](https://forums.speedlife.net/t/z32-30mm-caliper-question/95783/7 "2006-05-11T22:14:47Z")
no just front’s right now ---
**Author:** ![s14\_2Nv](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/s14_2nv/32/5476_2.png) [@s14\_2Nv](https://forums.speedlife.net/u/s14_2Nv)\ **Post date:** [May 12, 2006, 5:50am UTC](https://forums.speedlife.net/t/z32-30mm-caliper-question/95783/8 "2006-05-12T05:50:27Z")
> [@modded](#): > > what extra parts are need besides 300zx calipers/lines?? Calipers, rotors, lines, pads, clips, pins, bleaders and spacers with extended studs if you are running rims that don’t clear the calipers. ---
**Author:** ![smurf6x6](https://avatars.discourse-cdn.com/v4/letter/s/bcef8e/32.png) [@smurf6x6](https://forums.speedlife.net/u/smurf6x6)\ **Post date:** [May 12, 2006, 8:39pm UTC](https://forums.speedlife.net/t/z32-30mm-caliper-question/95783/9 "2006-05-12T20:39:34Z")
You only want the z32 master if you do the rear calipers to. If you do the only fronts and use the z32 master your prone to lock up the rears.