# Z32 Brake conversion lines **URL:** \ **Category:** Canada Nissan Automotive\ **Created:** [April 4, 2004, 9:53pm UTC](https://forums.speedlife.net/t/z32-brake-conversion-lines/137402 "2004-04-04T21:53:21Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Nis240](https://avatars.discourse-cdn.com/v4/letter/n/a9a28c/32.png) [@Nis240](https://forums.speedlife.net/u/Nis240)\ **Post date:** [April 4, 2004, 9:53pm UTC](https://forums.speedlife.net/t/z32-brake-conversion-lines/137402/1 "2004-04-04T21:53:21Z")
I am in the middle of doin the Z32 front brake conversion on my car and found a cheaper soluton to ordering lines from PDM or all the other places that sell them for like $80 USD + taxes , shipping etc. All the parts neede will cost about $80 canadian and these parts are readily available, i went to a local shop, Pro Stock (Domestic V8 shop) and they got me everything i needed the next day and i didnt even have to prepay. I decided to use some generic Earls ss braided lines (24 inch) and get a couple of adapter fittings. Here are the part numbers. 2- Earls SS Braided lines 63010124 (Paid $19 each) 1-Aeroquip brake fittings FCM2941 (Its a 2 pack) (Paid $13) 2-Earls brake fittings 989545 (Paid $6 each) Hope this helped ---
**Author:** ![SRBURG13](https://avatars.discourse-cdn.com/v4/letter/s/9fc29f/32.png) [@SRBURG13](https://forums.speedlife.net/u/SRBURG13)\ **Post date:** [April 5, 2004, 12:33am UTC](https://forums.speedlife.net/t/z32-brake-conversion-lines/137402/2 "2004-04-05T00:33:27Z")
Thats great. Good find. Do you think we should put this into the “installs” section of the forum? ---
**Author:** ![Nis240](https://avatars.discourse-cdn.com/v4/letter/n/a9a28c/32.png) [@Nis240](https://forums.speedlife.net/u/Nis240)\ **Post date:** [April 5, 2004, 9:55am UTC](https://forums.speedlife.net/t/z32-brake-conversion-lines/137402/3 "2004-04-05T09:55:41Z")
> [@SRBURG13](#): > > Thats great. Good find. Do you think we should put this into the “installs” section of the forum? That could work. ---
**Author:** ![Idratherbsidewayz](https://avatars.discourse-cdn.com/v4/letter/i/ecb155/32.png) [@Idratherbsidewayz](https://forums.speedlife.net/u/Idratherbsidewayz)\ **Post date:** [April 7, 2004, 11:18am UTC](https://forums.speedlife.net/t/z32-brake-conversion-lines/137402/4 "2004-04-07T11:18:38Z")
Im curious, how much does the whole conversion on the front cost? Ballpark. ---
**Author:** ![Nis240](https://avatars.discourse-cdn.com/v4/letter/n/a9a28c/32.png) [@Nis240](https://forums.speedlife.net/u/Nis240)\ **Post date:** [April 7, 2004, 1:02pm UTC](https://forums.speedlife.net/t/z32-brake-conversion-lines/137402/5 "2004-04-07T13:02:40Z")
It can easily be done for $600. Rotors $80 Pads $60 Lines $90 Caliper hardware $75 Calipers $240 ---
**Author:** ![Nis240](https://avatars.discourse-cdn.com/v4/letter/n/a9a28c/32.png) [@Nis240](https://forums.speedlife.net/u/Nis240)\ **Post date:** [April 4, 2004, 9:53pm UTC](https://forums.speedlife.net/t/z32-brake-conversion-lines/137402/6 "2004-04-04T21:53:21Z")
I am in the middle of doin the Z32 front brake conversion on my car and found a cheaper soluton to ordering lines from PDM or all the other places that sell them for like $80 USD + taxes , shipping etc. All the parts neede will cost about $80 canadian and these parts are readily available, i went to a local shop, Pro Stock (Domestic V8 shop) and they got me everything i needed the next day and i didnt even have to prepay. I decided to use some generic Earls ss braided lines (24 inch) and get a couple of adapter fittings. Here are the part numbers. 2- Earls SS Braided lines 63010124 (Paid $19 each) 1-Aeroquip brake fittings FCM2941 (Its a 2 pack) (Paid $13) 2-Earls brake fittings 989545 (Paid $6 each) Hope this helped ---
**Author:** ![SRBURG13](https://avatars.discourse-cdn.com/v4/letter/s/9fc29f/32.png) [@SRBURG13](https://forums.speedlife.net/u/SRBURG13)\ **Post date:** [April 5, 2004, 12:33am UTC](https://forums.speedlife.net/t/z32-brake-conversion-lines/137402/7 "2004-04-05T00:33:27Z")
Thats great. Good find. Do you think we should put this into the “installs” section of the forum? ---
**Author:** ![Nis240](https://avatars.discourse-cdn.com/v4/letter/n/a9a28c/32.png) [@Nis240](https://forums.speedlife.net/u/Nis240)\ **Post date:** [April 5, 2004, 9:55am UTC](https://forums.speedlife.net/t/z32-brake-conversion-lines/137402/8 "2004-04-05T09:55:41Z")
> [@SRBURG13](#): > > Thats great. Good find. Do you think we should put this into the “installs” section of the forum? That could work. ---
**Author:** ![Idratherbsidewayz](https://avatars.discourse-cdn.com/v4/letter/i/ecb155/32.png) [@Idratherbsidewayz](https://forums.speedlife.net/u/Idratherbsidewayz)\ **Post date:** [April 7, 2004, 11:18am UTC](https://forums.speedlife.net/t/z32-brake-conversion-lines/137402/9 "2004-04-07T11:18:38Z")
Im curious, how much does the whole conversion on the front cost? Ballpark. ---
**Author:** ![Nis240](https://avatars.discourse-cdn.com/v4/letter/n/a9a28c/32.png) [@Nis240](https://forums.speedlife.net/u/Nis240)\ **Post date:** [April 7, 2004, 1:02pm UTC](https://forums.speedlife.net/t/z32-brake-conversion-lines/137402/10 "2004-04-07T13:02:40Z")
It can easily be done for $600. Rotors $80 Pads $60 Lines $90 Caliper hardware $75 Calipers $240 ---
**Author:** ![rocafella](https://avatars.discourse-cdn.com/v4/letter/r/bcef8e/32.png) [@rocafella](https://forums.speedlife.net/u/rocafella)\ **Post date:** [October 29, 2004, 7:23am UTC](https://forums.speedlife.net/t/z32-brake-conversion-lines/137402/11 "2004-10-29T07:23:16Z")
Thanks for the info just a few more questions though, do they do the install for you as well? and do the earls ss lines work for the rear z32/r32 calipers as well? I’ll be getting a set of r32 calipers soon but don’t have much knowledge about installed them myself, is it a simple process? Thanks in advance ---
**Author:** ![Nis240](https://avatars.discourse-cdn.com/v4/letter/n/a9a28c/32.png) [@Nis240](https://forums.speedlife.net/u/Nis240)\ **Post date:** [October 29, 2004, 8:28am UTC](https://forums.speedlife.net/t/z32-brake-conversion-lines/137402/12 "2004-10-29T08:28:31Z")
This web site has lots of info on the swap and r32 brakes and 300zx brake are the same thing.[http://importnut.net/300zxbrakeswap.htm](http://importnut.net/300zxbrakeswap.htm) ---
**Author:** ![jdms13rhd](https://avatars.discourse-cdn.com/v4/letter/j/f05b48/32.png) [@jdms13rhd](https://forums.speedlife.net/u/jdms13rhd)\ **Post date:** [October 31, 2004, 5:34pm UTC](https://forums.speedlife.net/t/z32-brake-conversion-lines/137402/13 "2004-10-31T17:34:32Z")
I have baught lots of stuff from pro stock. They also have awsome prices on 4 and 5 point harnesses and fule lines and cells. Thanks for the info on the lines man. Thats awso 😃 me! ---
**Author:** ![TyPhOOn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/typhoon/32/5800_2.png) [@TyPhOOn](https://forums.speedlife.net/u/TyPhOOn)\ **Post date:** [October 31, 2004, 7:38pm UTC](https://forums.speedlife.net/t/z32-brake-conversion-lines/137402/14 "2004-10-31T19:38:03Z")
nis240 …your lines leak …☹ ---
**Author:** ![Nis240](https://avatars.discourse-cdn.com/v4/letter/n/a9a28c/32.png) [@Nis240](https://forums.speedlife.net/u/Nis240)\ **Post date:** [October 31, 2004, 8:39pm UTC](https://forums.speedlife.net/t/z32-brake-conversion-lines/137402/15 "2004-10-31T20:39:21Z")
> [@TyPhOOn](#): > > nis240 …your lines leak …☹ Did you put Teflon on the treads??? Probably not eh… :roll: ---
**Author:** ![TyPhOOn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/typhoon/32/5800_2.png) [@TyPhOOn](https://forums.speedlife.net/u/TyPhOOn)\ **Post date:** [October 31, 2004, 11:53pm UTC](https://forums.speedlife.net/t/z32-brake-conversion-lines/137402/16 "2004-10-31T23:53:38Z")
yes I did …bitch to get off and on trying to get the leak to go away ---
**Author:** ![Nis240](https://avatars.discourse-cdn.com/v4/letter/n/a9a28c/32.png) [@Nis240](https://forums.speedlife.net/u/Nis240)\ **Post date:** [November 1, 2004, 7:59am UTC](https://forums.speedlife.net/t/z32-brake-conversion-lines/137402/17 "2004-11-01T07:59:11Z")
> [@TyPhOOn](#): > > yes I did …bitch to get off and on trying to get the leak to go away They never leaked on my car… i guess you must have fucked them up scott. Weird ---
**Author:** ![TyPhOOn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/typhoon/32/5800_2.png) [@TyPhOOn](https://forums.speedlife.net/u/TyPhOOn)\ **Post date:** [November 1, 2004, 8:10am UTC](https://forums.speedlife.net/t/z32-brake-conversion-lines/137402/18 "2004-11-01T08:10:50Z")
hahahaha …NO … nm though …buy the real conversion lines … ---
**Author:** ![Nis240](https://avatars.discourse-cdn.com/v4/letter/n/a9a28c/32.png) [@Nis240](https://forums.speedlife.net/u/Nis240)\ **Post date:** [November 1, 2004, 5:16pm UTC](https://forums.speedlife.net/t/z32-brake-conversion-lines/137402/19 "2004-11-01T17:16:49Z")
> [@TyPhOOn](#): > > hahahaha …NO … > nm though …buy the real conversion lines … Yea… alot of the conversion lines are the same thing, generic lines with adapters. I did this for the front and rear on my car and have not have a problem. If you ever need help with brake line instalation feel free to give me a call. LOL ---
**Author:** ![TyPhOOn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/typhoon/32/5800_2.png) [@TyPhOOn](https://forums.speedlife.net/u/TyPhOOn)\ **Post date:** [November 1, 2004, 5:39pm UTC](https://forums.speedlife.net/t/z32-brake-conversion-lines/137402/20 "2004-11-01T17:39:37Z")
I find this thread amusing hahaha … but I will just need to remake that fitting that is all … [Next page](https://forums.speedlife.net/t/z32-brake-conversion-lines/137402.md?page=2)