# Zach's 97 Honda dx

**URL:** <https://forums.speedlife.net/t/zachs-97-honda-dx/257723>\
**Category:** Builds\
**Created:** [April 5, 2011, 8:50pm UTC](https://forums.speedlife.net/t/zachs-97-honda-dx/257723 "2011-04-05T20:50:47Z")\
**Posts on this page:** 20\
**Page:** 2

<div class="post-metadata">

**Author:** ![Vovchandr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/vovchandr/32/6275_2.png) [@Vovchandr](https://forums.speedlife.net/u/Vovchandr)\
**Post date:** [April 6, 2011, 9:03am UTC](https://forums.speedlife.net/t/zachs-97-honda-dx/257723/21 "2011-04-06T09:03:42Z")

</div>

> [@Red GTP VS Black EG Civic, one week ago](https://forums.speedlife.net/t/red-gtp-vs-black-eg-civic-one-week-ago/40838/4):
>
> With 3-4k to spend it is. You hush now :lol

You might as well go K or H at that point (NA 200+whp)

---

<div class="post-metadata">

**Author:** ![ReDevil](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/redevil/32/6385_2.png) [@ReDevil](https://forums.speedlife.net/u/ReDevil)\
**Post date:** [April 6, 2011, 9:05am UTC](https://forums.speedlife.net/t/zachs-97-honda-dx/257723/22 "2011-04-06T09:05:17Z")

</div>

No H is overrated. Yeah do they make straight K mounts now? Im old and not up to date on these things, and have yet to turbo my sweet mini me from 1993 :facepalm lol

---

<div class="post-metadata">

**Author:** ![imported\_hybrdthry91](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_hybrdthry91/32/6315_2.png) [@imported\_hybrdthry91](https://forums.speedlife.net/u/imported_hybrdthry91)\
**Post date:** [April 6, 2011, 9:17am UTC](https://forums.speedlife.net/t/zachs-97-honda-dx/257723/23 "2011-04-06T09:17:15Z")

</div>

k swap is the best for inspection, kpro ftw. K swap is gonna cost way more than 4k though. It is pretty much a bolt in operation. You have to cut the chassis for the shifter though. I think they make a kit that you just have to drill a couple holes now too that bolts in up top.

Can’t go wrong with a GSR, it’s the best bang for the buck. Get that fender painted please.

---

<div class="post-metadata">

**Author:** ![Justin\_GSR](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/justin_gsr/32/6412_2.png) [@Justin\_GSR](https://forums.speedlife.net/u/Justin_GSR)\
**Post date:** [April 6, 2011, 10:38am UTC](https://forums.speedlife.net/t/zachs-97-honda-dx/257723/24 "2011-04-06T10:38:57Z")

</div>

> [@Callout: Muscle50, Cobraman04 & 01AudiS4](https://forums.speedlife.net/t/callout-muscle50-cobraman04-01audis4/39759/139):
>
> ohh and please take the HONDA off the sun banner… if someone didnt know it was a honda from the front end… they dont need to know!

this

not gonna be able to swap in 200 wheel with out some mods unless you drop a j in. If you go B series with bolt ons ull be 170+ ish unless you do a full build. If you wanna boost in the future you can pretty much do that to any stock motor, best bang for the buck is B18c1 or B16

---

<div class="post-metadata">

**Author:** ![psi2high](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/psi2high/32/6320_2.png) [@psi2high](https://forums.speedlife.net/u/psi2high)\
**Post date:** [April 6, 2011, 11:20am UTC](https://forums.speedlife.net/t/zachs-97-honda-dx/257723/25 "2011-04-06T11:20:43Z")

</div>

Welcome and nice ek dude

---

<div class="post-metadata">

**Author:** ![jdaniels](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jdaniels/32/6399_2.png) [@jdaniels](https://forums.speedlife.net/u/jdaniels)\
**Post date:** [April 6, 2011, 11:43am UTC](https://forums.speedlife.net/t/zachs-97-honda-dx/257723/26 "2011-04-06T11:43:25Z")

</div>

I have an automatic y8 intake manifold for you that should net a few HP and be a direct bolt on affair - $30

---

<div class="post-metadata">

**Author:** ![Reckone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reckone/32/6324_2.png) [@Reckone](https://forums.speedlife.net/u/Reckone)\
**Post date:** [April 6, 2011, 12:08pm UTC](https://forums.speedlife.net/t/zachs-97-honda-dx/257723/27 "2011-04-06T12:08:39Z")

</div>

> [@FS:Nikon D50 DSLR \*BRAND NEW\*](https://forums.speedlife.net/t/fs-nikon-d50-dslr-brand-new/38912/15):
>
> I have an automatic y8 intake manifold for you that should net a few HP and be a direct bolt on affair - $30

If he doesn’t want it pm, ill grab it.

Looks like you have the 99-00 front end? If not I have oem red fenders for cheap :thumbup

---

<div class="post-metadata">

**Author:** ![ZmV91](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/zmv91/32/6696_2.png) [@ZmV91](https://forums.speedlife.net/u/ZmV91)\
**Post date:** [April 6, 2011, 2:52pm UTC](https://forums.speedlife.net/t/zachs-97-honda-dx/257723/28 "2011-04-06T14:52:01Z")

</div>

So if i find a B-series swap what years could the engine be to an obd2 swap.  
For example the b18’s it has to be a b18c or it wont fit up or something like that?

---

<div class="post-metadata">

**Author:** ![Reckone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reckone/32/6324_2.png) [@Reckone](https://forums.speedlife.net/u/Reckone)\
**Post date:** [April 6, 2011, 6:27pm UTC](https://forums.speedlife.net/t/zachs-97-honda-dx/257723/29 "2011-04-06T18:27:57Z")

</div>

Any B18b (LS motor) or B18C (GSR motor) from 96+ would work fine. You will need the complete drivetrain (mounts, axles, shift linkage, ecu, trans, etc). The wiring isn’t to bad, a LS motor needs minimal to no wiring to be put in the car. The GSR motor will need everything for Vtec added in (really only 5 wires or so).

---

<div class="post-metadata">

**Author:** ![MoonMan](https://avatars.discourse-cdn.com/v4/letter/m/35a633/32.png) [@MoonMan](https://forums.speedlife.net/u/MoonMan)\
**Post date:** [April 6, 2011, 6:31pm UTC](https://forums.speedlife.net/t/zachs-97-honda-dx/257723/30 "2011-04-06T18:31:08Z")

</div>

B18 is a whole bunch of engines, b18c is jdm type r/SiR. b18c1 is what everyone is telling you to do. its a usdm GSR motor. these motors will go right into your bay along with the correct motor mounts (transmission, axles, etc.). its been done before many times at this point motors go in and out of hondas like legos.

as far as odb2 if your gunna be technical with the law your not supposed to put a older year motor than the car itself (correct?), however anything 96 up is going to be odb2

---

<div class="post-metadata">

**Author:** ![low\_n\_slow](https://avatars.discourse-cdn.com/v4/letter/l/7bcc69/32.png) [@low\_n\_slow](https://forums.speedlife.net/u/low_n_slow)\
**Post date:** [April 6, 2011, 7:40pm UTC](https://forums.speedlife.net/t/zachs-97-honda-dx/257723/31 "2011-04-06T19:40:38Z")

</div>

if you shop around you can get a ls swap for very cheap and boost it. and later down the road you can do a ls/vtec if you want more power.

---

<div class="post-metadata">

**Author:** ![Dread](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dread/32/6544_2.png) [@Dread](https://forums.speedlife.net/u/Dread)\
**Post date:** [April 6, 2011, 8:29pm UTC](https://forums.speedlife.net/t/zachs-97-honda-dx/257723/32 "2011-04-06T20:29:56Z")

</div>

If youre only looking for 200hp boosting your Y7 is the way to go

---

<div class="post-metadata">

**Author:** ![Reckone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reckone/32/6324_2.png) [@Reckone](https://forums.speedlife.net/u/Reckone)\
**Post date:** [April 6, 2011, 8:40pm UTC](https://forums.speedlife.net/t/zachs-97-honda-dx/257723/33 "2011-04-06T20:40:01Z")

</div>

If your looking for a good reliable daily just do a b series. Boosting a daily isn’t the best for someone that is just learning.

---

<div class="post-metadata">

**Author:** ![MoonMan](https://avatars.discourse-cdn.com/v4/letter/m/35a633/32.png) [@MoonMan](https://forums.speedlife.net/u/MoonMan)\
**Post date:** [April 6, 2011, 9:30pm UTC](https://forums.speedlife.net/t/zachs-97-honda-dx/257723/34 "2011-04-06T21:30:44Z")

</div>

if moneys real tight either do a mini me swap to y8 so you can have some vtakkkk or find yourself a B18b and enjoy like that for a lil while till maybe its not a daily and then you can boost or whatever down the road.

---

<div class="post-metadata">

**Author:** ![Johawk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/johawk/32/6284_2.png) [@Johawk](https://forums.speedlife.net/u/Johawk)\
**Post date:** [April 7, 2011, 4:56am UTC](https://forums.speedlife.net/t/zachs-97-honda-dx/257723/35 "2011-04-07T04:56:53Z")

</div>

B18c is where it’s at! Great NA, great boosted. H deuce… not so much.

we have all seen a stock 150k B18C with 20# go 11.01 in a nearly full weight 94 EX Coupe.

---

<div class="post-metadata">

**Author:** ![LKSi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lksi/32/6316_2.png) [@LKSi](https://forums.speedlife.net/u/LKSi)\
**Post date:** [April 7, 2011, 6:37am UTC](https://forums.speedlife.net/t/zachs-97-honda-dx/257723/36 "2011-04-07T06:37:01Z")

</div>

H series are OK. That’s about it. Not worth it IMO.

---

<div class="post-metadata">

**Author:** ![ZmV91](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/zmv91/32/6696_2.png) [@ZmV91](https://forums.speedlife.net/u/ZmV91)\
**Post date:** [April 7, 2011, 8:52am UTC](https://forums.speedlife.net/t/zachs-97-honda-dx/257723/37 "2011-04-07T08:52:41Z")

</div>

Ive been looking at motors on the JDM sites and was wondering what all of you think of pricing for the whole assembly. Here’s a motor i seen on a site is this too much or reasonable for it and is the mileage they say is it truth on these type of sites.

[http://www.japandirectjapanese.com/product.php?productid=109&cat=1&page=1](http://www.japandirectjapanese.com/product.php?productid=109&cat=1&page=1)

---

<div class="post-metadata">

**Author:** ![Vovchandr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/vovchandr/32/6275_2.png) [@Vovchandr](https://forums.speedlife.net/u/Vovchandr)\
**Post date:** [April 7, 2011, 9:06am UTC](https://forums.speedlife.net/t/zachs-97-honda-dx/257723/38 "2011-04-07T09:06:01Z")

</div>

Mileage is \*always 40k on these :rolleyes

Your best bet is to take one from a legit seller on a major forum like H-T or others (can’t recall any)

That way you can get everything you need and you will know it ran well, especially if its a trusted seller.

---

<div class="post-metadata">

**Author:** ![Turbo\_B18C\_EJ6](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_b18c_ej6/32/6611_2.png) [@Turbo\_B18C\_EJ6](https://forums.speedlife.net/u/Turbo_B18C_EJ6)\
**Post date:** [April 7, 2011, 9:08am UTC](https://forums.speedlife.net/t/zachs-97-honda-dx/257723/39 "2011-04-07T09:08:17Z")

</div>

[www.hmotorsonline.com](http://www.hmotorsonline.com) is a good place to buy engines/parts, ive purchased fro mthem many times before an d they are legit. i bought my y21 trans fro mthem as well as my recaro seats and other goodies, check them out.

---

<div class="post-metadata">

**Author:** ![Justin\_GSR](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/justin_gsr/32/6412_2.png) [@Justin\_GSR](https://forums.speedlife.net/u/Justin_GSR)\
**Post date:** [April 7, 2011, 9:41am UTC](https://forums.speedlife.net/t/zachs-97-honda-dx/257723/40 "2011-04-07T09:41:49Z")

</div>

if you want a lil more power outa the box you can scoop a b18c5 (usdm type r)

[Previous page](https://forums.speedlife.net/t/zachs-97-honda-dx/257723.md?page=1)

[Next page](https://forums.speedlife.net/t/zachs-97-honda-dx/257723.md?page=3)
