# Zirgo electric fans

**URL:** <https://forums.speedlife.net/t/zirgo-electric-fans/220808>\
**Category:** NYSpeed Automotive\
**Created:** [February 27, 2012, 8:06pm UTC](https://forums.speedlife.net/t/zirgo-electric-fans/220808 "2012-02-27T20:06:41Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Studderin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/studderin/32/7197_2.png) [@Studderin](https://forums.speedlife.net/u/Studderin)\
**Post date:** [February 27, 2012, 8:06pm UTC](https://forums.speedlife.net/t/zirgo-electric-fans/220808/1 "2012-02-27T20:06:41Z")

</div>

Anyone use them? They list CFM number a lot higher then other, and less amp draw.

3000cfm 16" S blade fans with a 10amp draw, when others are 2100cfm and 17 amps. They are cheaper too… sounds to good to be true?  
Iver never looked into whats out there for a universal electric fan, dont wnat to find out theirs something up with there specs?

---

<div class="post-metadata">

**Author:** ![somedude](https://avatars.discourse-cdn.com/v4/letter/s/ecd19e/32.png) [@somedude](https://forums.speedlife.net/u/somedude)\
**Post date:** [February 28, 2012, 9:15am UTC](https://forums.speedlife.net/t/zirgo-electric-fans/220808/2 "2012-02-28T09:15:50Z")

</div>

I don’t have the size of the fans in front me but the 93-95 taurus SHO automatic twin fans are 2700cfm on the HI setting (has a HI-LOW resister built onto the fan wiring) and are very thin. I don’t have any information on current draw. They go for under 50 bucks on the forums all day. It does not really answer your question but If you have a way to measure current draw I have a set wired on my SHO powered camaro if you care to test them.

---

<div class="post-metadata">

**Author:** ![Studderin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/studderin/32/7197_2.png) [@Studderin](https://forums.speedlife.net/u/Studderin)\
**Post date:** [February 28, 2012, 11:40am UTC](https://forums.speedlife.net/t/zirgo-electric-fans/220808/3 "2012-02-28T11:40:29Z")

</div>

So they are not Zirgo?

[http://www.zirgo.com/](http://www.zirgo.com/)

---

<div class="post-metadata">

**Author:** ![ultradriver10000](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ultradriver10000/32/7397_2.png) [@ultradriver10000](https://forums.speedlife.net/u/ultradriver10000)\
**Post date:** [February 28, 2012, 2:27pm UTC](https://forums.speedlife.net/t/zirgo-electric-fans/220808/4 "2012-02-28T14:27:46Z")

</div>

I don’t have any experience with the company but I do have experience in industrial mixing. The only two variables that would really allow higher CFMs at a lower amp draw are the electric motor efficiency or the blades efficiency.

Edit:  
I just talked to their tech rep and they said the 16" 3630 cfm fan uses 12-14 amps and all the others are about 10-12 amps. They accomplished this by using a slightly oversize high quality electric motor coupled with a custom high efficiency blade design. Boom!