sounds good, i look forward to testing a few of them and seeing how it goes!!!
sounds like heck of a deal…I wasn’t planning on getting a motor this year but this sounds very appealing. If these engines are clean and complete i’m in as well!
How about a RB20det?? RB25det?
Price on an s14 blacktop/notchtop?
if this is for sure a full engine set for $1800, i have cash in hand willing to pay tomorrow.
:gtfo: …back o’ the line.
Okay, this engine belongs to Koz, we have one more full engine… but it’s a clip, and as such is considerably more. 3200 for that one. This is a picture of Koz’s engine.
http://ca.geocities.com/solarian@rogers.com/P1010021
As you can see it is mint as hell and if you look in the bottom corner you can see the uncut harness. We’re also giving him an intercooler from a 300ZX since the set did not include one.
Prices for other stuff:
Complete 20B 3Rotor (no tranny, only auto available, and I don’t think u want one) $3000 <— This price WILL go down, we haven’t negotiated on this yet.
RB26DETT <- No ecu - 4200 <— same dealy, price will go down for sure
RB25DET <- complete motor set, uncut harness, yadda yadda, 4200
SR20DET FWD Pulsar w/ top mount IC - 1500 Motor only
All the prices I listed here will go down for sure, we didn’t negotiate like for the redtop, we just asked him for prices while he was getting our engine.
Edit: I have lots more pics, but no time to post them now 
I’ll post LOTS of pics tommorow, way more of Koz’s engine as well as the blacktops, RB26, RB25, 3 Rotor, 20Valve Silvertop 4 throttle Toyota engines, etc…
Considering the nature of our supplier, getting full sets like this is pretty hard, if you’re willing to settle for cut harness engines, we can go down WAY lower and we can get you more engines.
Okay, thing is… i just need a block and two heads, I dont really need all the other useless shit, intake manifold / surge tank would be nice but not necessary.
i dont need turbos or anything… oil pan is even optional… tranny not required.
plus how long does it take to get them
:thumright: thanks again, Antonio.
I can’t get you two heads at the moment. But there is an RB26 in stock, and I’ll see if they’re willing to part it. I’m going again tommorow, so I’ll update you. And we can’t get an RB30… prolly ever SR20VE is a no at the moment, but could become a yes later on.
Hey man, as long as you enjoy it, that’s all that counts.
Well Koz, I hope you like your engine tomorrow, like I said
I wish it was mine!
My partner will be posting up all the pics tomorrow including the other engines we have currently. (RB25, RB26, 3 rotor)
We also have a crap load of Honda engines, H22A’s B16’s (I know I’ll probably get crucified with honda engines, but hey, we can get them too!)
Uhm… slight delay with the pics, I just realized they are monstrously huge and my webspace is not. I’ll have to talk to Allen and figure out where we’ll host these.
Since I do have some space, here’s pics of Godzilla for you all to drool at. This engine is still dusty and dirty b/c it’s still in its resting place. When we pull it out and clean it, it will look pretty just like Koz’s engine.
http://ca.geocities.com/solarian@rogers.com/P1010008
http://ca.geocities.com/solarian@rogers.com/P1010013
The web site you are trying to access has exceeded its allocated data transfer.
Rogers are bastards… I’ll indeed need to get other hosting for these, or just email them to people.
Photobucket.com Solarian…
Timing cover looks dented.
Can you get BLOWN motors? :roll:
Ooookay… Updates… I have bad news.
The engine I had for Koz, is not as complete as I thought. He didn’t want it, so I still have a deposit on it if anyone else is interested. It is lacking an ignitor chip, air flow meter, the speedo sensor and the rubber hoses from the turbine and throttle body. Also, we discovered that we can no longer deal for 1800, I have to bump it up to atleast 1900.
If you want JUST a engine w/ turbo & tranny, price is 1500.
There’s still the clip with the dash but no fenders, lights, hood, etc… Still has the suspension, brakes, all there. And oooh, digital climate control. Odo on the clip reads 91K. Price is a firm 3500 for that since we also need to get a flatbed to get that out of the shop.
The inventory is really low right now on nissan stuff, b/c they mostly do honda, but in 5 weeks time lots will be available. We’ll have clips and motorsets, so I’ll bump this back up when there’s more stock.
I’m gonna post this on honda forums and TSR as well, since there’s a lot of amazing non nissan stuff, like a front cut off a JDM prelude SH including ALL of the fenders, hood, lights, foglights, everything possible as well as an S2000 motor set, like a million H22As and B16As plus mitsu, subaru and toyota stuff.
Justin: Negative on the blown motors
ok, so for 1900 what exactly are we getting? if its complete with uncut harness, ecu and ignitor…with good compression…im still in…
let us know asap
As I said, it was a mistake for me to start this now with stock this low. There is only one engine with this stuff, it is from last summer’s shipment, and hit 155psi at all 4, no leakage anywhere.
- It is missing an ignitor, air flow meter, speedo sensor and the rubber pipes on the turbo and throttle body -
I will have complete engines and more of them in 5 weeks time, price is unknown for now