1995 Honda Prelude Vtec: 1 OF A KIND!: SHAVED/TUCKED BAY!!! $6500$
New Pictures 5/6/08: PRESENT STATE=dirty
Time has finally come to sell my baby! I purchased this car 3 years ago, and have spent HUNDREDS of hours working on it. I have 90% of the reciepts. The chassis has 140,XXX miles on it, but the JDM motorswap has only 60k. Oil changed every 3k or less, tons of new parts and extra spare parts included.Clear Title. I baby the car. I have ran at the track (w/o nitrous) and ran a 14.4 @100mph w/ my old tires…
Here is the list of current modifications:
1995 Honda Prelude Vtec
Engine- Swapped JDM H22a
Internal Mods:
- Removed Balance Shafts, Manual Tensioner conversion
Motor Mods:
- 1 of a Kind Password JDM CF intake chamber
- Megan Racing header with 2.25 Collector mod (heat wrapped)
- 22" magnaflow resonator to 2.25" exhaust to RSR exmag muffler
- Adj Fuel pressure regulator (included)
- NGK blue wires
- Custom Painted Valve Cover
- Zex Nitrous
*Exedy Clutch (<5k miles) - Fidanza Flywheel (<5k miles)
- P13 JDM h22a obd1 ECU
- C+R racing radiator
- Spoon Radiator Cap
- SS clutch line (from Master cylinder to Slave)
- Odyssey 680P
- ES motor mount inserts
- Driveshaft Shop axles
- Magnetic Tranny/Oil drain bolts
- Hondata Intake Manifold Gasket
- NGK BR7ES + stock NGK plugs (<3k miles)
Weight Reduction:
- PS
- AC
- Cruise (included)
- EGR
- Charcoal Canister
- Removed rear seats
- Removed front and rear sway bars.(included)
Exterior:
- JDM tailights
- JDM headlights
- JDM amber front lights
- CUSTOM darkspeed lip
- CUSTOM accord rear lip
- VIS carbon fiber Trunk
- PNP HID KIT (8K)
- 5th Gen rear bumper lights + stock
- JDM sidemarkers
- JDM foglights + Wireless REMOTE!!
Suspension
- KYB AGX
- Sprint Lowering Springs
- Stock wheels painted black
- 205/50/15 BFG drag radials in front
- Rear strut brace
- Brembo Cross Drilled and slotted rotors
- Albany brake pads
Interior:
- Bride Brix 2 in Blue
- Skunk 2 weighted Knob
- Red/Black stitched boots
- Gauge cup
- Completely shaved / Painted interior
- Autometer Ultra-Lite Water Temperature Gauge
- Autometer Ultra-Lite Nitrous Pressure Gauge (included)
- Apexi RSM
- SRR ignition Switch panel
- Stock acura integra CD player
EXTRA’s INCLUDED
-Spare trunk + spoiler (ready for paint)
-ABS parts
-AC parts
-PS parts
-Cruise Control Parts
-Stock front lip
-Spare tire
-Lightspeed 28mm sway bar BNIB
-aftermarket FPR
-JDM climate control
-FAST-TURBO SS FUEL LINE KIT W/ INLINE FUEL FILTER (100$ VALUE!)
Problems
-Honda Cancer coming back (was once repaired)
-Needs Ball joints (Front lower included) (EDIT: FRONT LOWER BALL JOINTS INSTALLED 4/17 at Meinke)
-Trunk has a crack in it (not very noticable)
-Few dings/dents (Nothing major)
-Sidemarkers aren’t hooked up.
Maintenance done since i’ve owned it
-Rotors/Calipers/Pads
-Timing Belt
-O2 sensor
-Exhaust
-Dizzy Cap + Rotor
-Spark Plug Wires
-Gas line replaced
-Coolant flush
Please check out evbecks.com for more pictures and information
$6500 obo
please call 585-739-8867 (Evan) if your interested
its been POTM on prelude power, and featured on JDMdreams.net , also featured on the shaved/tucked engine bay thread in the appearance section. In addition, with this car, if interest, goes the responsibility of the BB squad!! I am the founder, and I hope that the next buyer would continue the squad!
I HAVE ONLY SPRAYED THROUGH 1 TANK OF N20!! COMPRESSION IS GOOD BEFORE AND AFTER I SPRAYED!
Modified by DarkBB4 at 2:22 PM 5/6/2008