FS: e30 EVERYTHING YOU COULD DESIRE

All prices are firm, in U.S. dollars, and do not include shipping. My paypal and e-mail are Nerdigger@aol.com.

SUSPENSION

Eibach Ground Control Coilovers for non-M e30
375 in-lb springs for the front & 500 in-lb for the rear
This kit is set up for Bilstein Sports
Has about 7k on them. Kept incredibly clean, and come with everything they originally did
$345

http://img.photobucket.com/albums/v727/Coldaccord/P4260007.jpg

Bilstein Sports
$250 SOLD

http://img.photobucket.com/albums/v727/Coldaccord/P5290030.jpg

COMPLETE EURO M20 W/99K!
From my touring. 99k on it. EURO m20. no leaks, doesn’t burn any oil, no issues whatsoever. With clutch, flywheel, and Getrag 260 5 speed transmission, no grinds, no issues. Have pics (they’re just on my external hard drive which is at my parents house). Comes with alternator, p/s pump, starter, etc etc. everything it would normally come with (but no a/c compressor, my touring doesn’t have a/c)

$1300 w/tranny & everything

MOTOR IS SOLD. TRANSMISISON STILL AVAILABLE

BALLER M20 PARTS

Mahle 10.2:1 pistons. Brand new, in box. Come with all rings. Use “I” rods (I have a set w/60k on them in the “Used m20 parts” section below)
$550

http://img.photobucket.com/albums/v727/Coldaccord/P4290014.jpg

Fresh cylinder head. Had ~65k on it. Got it cleaned, milled, 3 angle valve job, new valve seals, valves reseated
$525

http://img.photobucket.com/albums/v727/Coldaccord/P4260008.jpg

http://img.photobucket.com/albums/v727/Coldaccord/P4290010.jpg

Catcams 283/283 camshaft
duration duration maximum lift lift at TDC
[0.1mm+cl] [0.1mm+cl] [cl=0] [cl=0]
283/283 246/246 11.90/11.90mm 2.75/2.75mm
new in box
$275

Performance valve springs: full set
“the increased duration of a performance cam with an aggressive grind forces the valve to open and close at a much faster rate. This rapid opening and closing at high RPM can cause “valve float”. Valve float is the inability for a valve spring to close the valve fast enough to avoid piston contact.”
$250

m20 rocker arms. Full set. New in box.
$190

e30 rocker arm shafts (includes 2). New in box.
$70

m20 9mm spark plug wires. Barely used.
$80

http://img.photobucket.com/albums/v727/Coldaccord/P4290018.jpg

Barely used SMT-6. Like new
$300

http://img.photobucket.com/albums/v727/Coldaccord/P4290026.jpg

Dinan chip (I can’t remember if this is the real one or the knock-off, so I’ll price it at knock off price). For 173 ecu
$85

http://img.photobucket.com/albums/v727/Coldaccord/P5290051.jpg

Euro 323i flywheel. ~11 lbs, so ~8 lbs lighter than stock m20b25. I had it resurfaced, but it’s got a little surface rust on there. Nothing serious, pictures make it look way more dirty than it is.
$95

http://img.photobucket.com/albums/v727/Coldaccord/P5290046.jpg

http://img.photobucket.com/albums/v727/Coldaccord/P5290047.jpg

USED M20 PARTS

351 DME. ~65k.
$50

Alternator. Spins freely.
$35

http://img.photobucket.com/albums/v727/Coldaccord/P5290018.jpg

http://img.photobucket.com/albums/v727/Coldaccord/P5290019.jpg

m20b25 (all these things have ~65k on them):
intake manifold
$40

Fuel pressure regulator
$15

Fuel rail
$15

injectors
$40

http://img.photobucket.com/albums/v727/Coldaccord/P5290016.jpg

http://img.photobucket.com/albums/v727/Coldaccord/P5290014.jpg

http://img.photobucket.com/albums/v727/Coldaccord/P5290013.jpg

valve cover. I cleaned it up just a bit
$40

http://img.photobucket.com/albums/v727/Coldaccord/P5290010.jpg

oil cooler & lines
$60

http://img.photobucket.com/albums/v727/Coldaccord/P5290031.jpg

power steering pump pictured above.
$20
SOLD

o2 sensor
$45
http://img.photobucket.com/albums/v727/Coldaccord/P5290004.jpg

ICV
$40

http://img.photobucket.com/albums/v727/Coldaccord/P5290002.jpg

m20b25 afm (x2)
$25

http://img.photobucket.com/albums/v727/Coldaccord/P5290003.jpg

m20b25 throttle body and throttle position switch
$25

http://img.photobucket.com/albums/v727/Coldaccord/P5290049.jpg

plug wire cover
$10

http://img.photobucket.com/albums/v727/Coldaccord/P5290035.jpg

4.10 open diff. probably leaks.
$45

http://img.photobucket.com/albums/v727/Coldaccord/P5290012.jpg

http://img.photobucket.com/albums/v727/Coldaccord/P5290011.jpg

325ix dipstick
$10

http://img.photobucket.com/albums/v727/Coldaccord/P5290034.jpg

wiring harness from ’88 325ix ~65k
$75

http://img.photobucket.com/albums/v727/Coldaccord/P5290008.jpg

knee bolster. Perfect shape
$30
http://img.photobucket.com/albums/v727/Coldaccord/P5290003.jpg

center console. Perfect shape.
$35
http://img.photobucket.com/albums/v727/Coldaccord/P3120032.jpg

e-brake console. Perfect shape.
$20
http://img.photobucket.com/albums/v727/Coldaccord/P4290022.jpg

throw back: Early model pass side taillight. Great shape (bought from Jordan). Bought it for my first e30 like 5 years ago and it just sat in my room.
$35
http://img.photobucket.com/albums/v727/Coldaccord/P4290019.jpg

overhead panel, for sunroof cars. Had a bit of discoloration in the center where the rearview mirror goes, I sharpied it. Can’t even see it when installed
$20
http://img.photobucket.com/albums/v727/Coldaccord/CarParts004.jpg

late model 3rd brakelight
$10
http://img.photobucket.com/albums/v727/Coldaccord/CarParts011.jpg

COMPLETE EURO M20 W/99K!
From my touring. 99k on it. EURO m20. no leaks, doesn’t burn any oil, no issues whatsoever. With clutch, flywheel, and Getrag 260 5 speed transmission, no grinds, no issues. Have pics (they’re just on my external hard drive which is at my parents house). Comes with alternator, p/s pump, starter, etc etc. everything it would normally come with (but no a/c compressor, my touring doesn’t have a/c)

$1300 w/tranny & everything

MOTOR IS SOLD. 5 SPEED TRANSMISSION STILL AVAILABLE

NEW M20 REPLACEMENT PARTS

bottom end set part number 11-11-9-063-134 $25
head bolt set pn 11-12-1-726-478 $15
head gasket set pn 11-12-9-059-240 $45
main bearing set pn 11-21-1-706-847-6cyl $65
rod bearing set 11-24-1-284-849-6cyl $35
connecting rod bolt set 11-24-1-713-342 $50 SOLD
rear shock mount set 33-52-1-092-362 $25
transmission tail mount 22-31-1-094-916 (2) $10
guide bushing for driveshaft 26-11-1-207-096 $7
alternator belt 11-51-1-469-236 $3
power steering belt 32-42-1-469-239 $3
a/c compressor belt 64-52-1-466-043 $4
oil pan gasket (not cork, cork sucks) 11-13-1-730-234 $5
valve cover gasket 11-12-1-730-229 $7
clutch master cylinder 21-52-1-156-000 $55
clutch slave cylinder 21-52-1-116-300 $30
sachs clutch kit from bavauto;
“To replace your worn clutch you will have to remove the transmission from your BMW. This is not terribly difficult, but it is time consuming and you wouldn’t want to do it twice for the sake of incidental parts. This is why we have put together a clutch kit with all the items you should replace, not just the obvious ones. Our kit contains: an alignment tool, clutch disc, pressure plate, throw-out bearing, rear engine seal, pilot bearing, all transmission seals, exhaust gaskets, and a pivot pin. All our clutch components are manufactured by Sachs, Europe’s premier clutch manufacturer. Sachs clutch discs, pressure plates and throw out bearings are original equipment and are engineered to deliver maximum performance.”
Part number CK325I525
$230
engine mounts (2) 11-81-1-132-323 $25 for both
water pump 11-51-9-070-759 $55
coolant level sensor 61-31-1-378-320 $25
Bosch Super spark plugs (set) 12-12-9-061-869 $25
Timing belt kit 09-9320-000. comes with timing belt, tensioner, and replacement sticker $30

forgot to mention

m20b25 rods 60k on them $50

m20b27 full block; crank, rods, pistons, pan, pump, all together. 155k. $95

why not just put all those parts together and build a whole car lol?

ground controls sold too.

you e30 guys are sleeping. you will never see this shit for this cheap. I just need to dump it all so I can buy the car’s new motor. shit will be tiiiiggghhhtt

mmm. 300hp ///m wagon. ///mmmmmmm

Bump for a silly amount of E30 shit for sale.

Got any 4x100 wheels around?

I’ve got a set of 14" bbs basketweaves with nice tires, but I might be picking up a 90 325i. if i don’t, they will be for sale. (I’m going 5 lug on the touring)

you should have just built the whole damn car and sold it all together LOL

i wish i had a bimmer
GLWTS

If you do end up selling the basketweaves, fuck mingle, sell them to me. They would look better on an e30 than they would on a little girl miata.

Trans for an M20?

Suck a dick jay.

bump.

I’m not sure who the motor is going to right now. there are 3 dudes battling it out. 1 of which, who had first dibs but lives far (illinois, the other 2 are in toronto) doesn’t need the tranny, in which case I will sell it for $250, you can have the clutch too. no grinds or anything, great shape

obdI s52 > stroked m20

plus, I could never sell my touring. can’t replace that shit

damnit. there’s not one e30 part i could possibly desire. I need diving board bumper trim, and crank windows…

got any?

nah man, sorry. bounce on those ugly db’s and get some euro’s! i sent you a link for a set a while back