FS: LOTS of Drilled Rotors, SS Lines, new, LOOK INSIDE

Classifieds
1

ok, I have some brake goodies for sale…
everything is brand new, never mounted.

I have 1 full set of 4 (2 front, 2 rear) cross drilled rotors (no slots) with a lug pattern of 4x115…(if i measured correctly from center of hole to center of opposite hole)…the fronts measure like 11 inches in diameter and the rears measure around 10"…centers are black, and the black paint is scratched up a bit…rotors themselves are PERFECT. Brand new, never mounted.
These were originally for a 1999 Infinity G20
http://i9.photobucket.com/albums/a72/frogiiie/5-4lug4.jpg

I also have a full set of 4 (drilled like the rest) originally for a 2004 Ford Focus SVT
http://i9.photobucket.com/albums/a72/frogiiie/6-4lug4.jpg

I also have a set of 4 BREMBO 5 Lug (drilled like the rest) originally for a VW Golf VR6
http://i9.photobucket.com/albums/a72/frogiiie/7Brembo5lug4.jpg

I have 2 BREMBO rotors (drilled) for an Audi A4 Q
http://i9.photobucket.com/albums/a72/frogiiie/8BremboRear.jpg

I also have some stainless brake lines. A complete kit for a 1996 VW GTI
http://i9.photobucket.com/albums/a72/frogiiie/SSLines.jpg

I am basically just looking for the best offer on this stuff…Im sure these will fit tons of other makes/models…do the research. I dont even know what to ask for them…and im not looking to get rich. post up some offers.

2

actually its the center of one hole to the outside edge of the farthest apart…i am guessing they are prolly 5x114.3 or 5x4.5…do u know what kind of vehicle they are from

3

For a Mustang??

4

no, i have no clue about the vehicle they are for…thats the problem.
online, for a 4 lug, it stated to measure center or hole, to center of opposit hole…for 4 lug only…5 lug it outside of hole to inside of opposite hole…

Edit: Here is the way i measured the 4 lug and 5 lug…

The distance according to the below diagram is 115mm
http://www.mrt-wheels.com/baseimages/4lug.jpg

The distance according to the 5 lug, is 4.5"
http://www.mrt-wheels.com/baseimages/5lug.jpg

5

if those 5 lug front rotors will fit my mx6 ill take them …how much and is there any way of fiding out if theyll fit lol?

6

i believe these are stock replacement sizes…i would be glad to take any and all measurements if you want to measure yours. as for price…just make a fair reasonable offer and they are yours. I really dont know what they are worth.

7

my lug pattern is 5x 114 i believe …well around how much i dont want to lowball

8

lowball away…really, i dont mind…im letting them go very reasonable. im not going to get greedy on these…just throw a price out there, what are you looking to spend? I will work with you!

9

25- 30$?

10

PMd

11

TTT will also trade for turbo related parts, ie: bov, IC, WG etc etc.

12

TTT, Check the original post, i fount out what cars they were originally for, and i have a bunch more i just added!!!

13

how much you want for the audi rotors… im probably the only one on here with a use for them

14

PMd

15

TTT, selling for around HALF price! see the revised original post…

16

the focus svt rotors should fit a 4 lug foxbody with 17 inch wheels

17

wanna buy them? lol
I will let all 4 go for $75

18

im not sure if the caliper will fit on those monster rotors plus i have rear drum

what size rotors are they?

19

i cant get the exact measurements right this moment, but i am almost 100% certain they are stock replacement sized rotors, just cross drilled…i will try and get you a measurement today…thanks.

20

im not sure what the svt focus has for a stock size, but these are pretty big…the rears are 11" in diameter and the fronts are 12" in diameter. these particular ones are also “gold-ish” in color…i believe its a gold colored zinc plating on them that makes it that color. and the hubs parts arent painted black…I will get picstures if need be.

edit: these are also 4 lug