I’m located in Potsdam for school but am frequently in the Albany area and willing to meet up to save shipping costs.
All prices are OBO. Please let me know if you have any questions.
Diverter Valve (#06a145710N):
Has roughly 3kmi on it at 6psi. Will work perfect.
Fits:
2000-2001 Audi S4
1998-2005 Beetle 1.8T
1998-2005 Passat 1.8T
2000-2004 Audi TT 1.8T
1996-2005 Audi A4 1.8T
2000-2001 Audi A6 2.7T
2000-2005 Golf/Jetta 1.8T
Most Custom Applications
$45
Kinetic Stage 1 VR6 Silicone Coupler:
Comes with the Kinetics kit and is designed for turbo cars without an intercooler. Has roughly 3kmi on it and there are no tears or rips.
$30
Brand New OBDII VR6 MAF Housing (Never used/installed):
I needed a new MAF sensor for my VRT with a 4" housing so I have no use for this one. From what I have heard, these housings are upgrades for AEB and DBW 1.8T’s. This housing has never seen an engine bay; the endcaps haven’t even been taken off.
$50?
I made this manifold about 2 years ago. I started with a regular OBDI intake, that I bought at a swap meet, and cut out all of the center section with an angle grinder and die grinder. I then brought it to an industrial machine shop in Richmond VA (where I used to live). They made an AL plate and tig welded it on as seen in the pictures. I then brought it to a napa machine shop where it was hot tanked and steam cleaned. I then taped it all off and painted it with rustoleum high temp engine paint in flat black.
I don’t have any dyno plots for it and I don’t think there is much of an HP gain, but there was a noticable increase in throttle response which is as important.
I would like to keep it but since I have swapped over to OBDII, the throttle body won’t bolt on so I had to use that style manifold.
I’d like to get $175 for it but I am open to any reasonable offer.
Thanks