Hey guys,
Going a different direction with my Datsun build and no longer need these items. Prices are best offer but be reasonable. Everything located in Kitchener, but I can deliver if the price is right.
KA24DE Brian Crower V2 Cams #BC0211 - 264/264, .375"/.375"
Used - was told by previous owner that were only run for a couple thousand km. All lobe surfaces look fairly mint, and I haven’t ran them since I bought them.
These are the same: http://www.frsport.com/Brian-Crower-BC0211-Camshafts-Stage-2-Street-Strip-264-264-KA24DE_p_7844.html
Cam card link: http://briancrower.com/makes/nissan/cam_card/bc_0211_RWD.pdf
–$250
(Top picture is mine beside a KA tranny, Bottom picture is internets - they all look the same).
IIRC the tranny I have left is an 04 with 90,000 on it. It’s been sitting in my basement for 2.5 years now, sealed. The Z33 6MT is similar spec to a VR4 Getrag and can handle a pile of power. You can buy adaptor plates to SR, or can make your own using a KA auto bellhousing (which I will include with tranny if wanted).
–$600
Excellent condition Q45 90MM Throttle Body w/ TPS.
Couple of comparison shots with a stock KA ~60mm tb…
–$120
Red Denso 550cc injectors - top feed off a FC-TII - $80
Bunch of stock KA Parts that are best offer - much more inclined to have someone pick up everything and leave a case of MGD.
S14 KA bare block
All the parts out of block seperate
#28 S13 DE 5speed ECU
Pretty well every bracket, motor mount etc off DE
S13 & S14 KA Head (S14 still assembled)
Trans dust shield
KA24DE exhaust mani
Box o bolts in bags.
Other shit I find.
PM, Email - Aliptayfischer@gmail.com, Cell - 5194oh43253
Thanks,
Aaron