I’ve been on this site alot to do research and see what events are going on but have never formally posted in the forum…
My name is Drew, im 23, and im from the scott township area. I bought a 2006 Subaru STi about 2.5 yrs ago when I started getting interested in AUTOX, TIME TRIALS, and PRO SOLO events.
This is my pretty much my current dyno plot and pics. I was unable to find my final pull dyno plot, but this plot only differs very few wtq and the hp number where practically identical. The final numbers were 425 AWHP/ 365 AWTQ @ 20 psi
my mods include:
Stock EJ257 block
Blouch Dom 3 turbo (8cm exhaust housing, 52 lb/min turbo, 30R cartridge, dual ball bearing turbo)
APS DR525 FMIC
APS 70mm CAI
GFB BPV
Grimmspeed ported and coated Exhaust manifold
Grimmspeed TGV deletes
phelonic spacers
Perrin 2.4" inlet
Crucial thermostat
APS MAF tube
TurboXS EWG uppipe
Tial 44mm EWG
NGK 1 step colder plugs
Power Enterprise 850cc injectors
Perrin fuel rails
Perrin EBCS
Quick time performance DP with electric cutout
SPT catback
Cobb V2 accessport
ACT streetlite flywheel
ACT Extreme pressure plate
ACT 6 puck race clutch
Perrin Front and Rear Endlinks
Whiteline Front and Rear Camber Plates
RaceCompEngineering Tarmac 3 Custom Coilovers (650lb Swift fronts/ 500lb Swift rears)
Whiteline 29mm Front Swaybar
Whiteline 24mm Rear Swayar
H&R front and Rear Camber Bolts
H&R Front and Rear 8mm Wheel Spacers (AUTOX only)
show setup: 17x9 Volk TE37 Gunmetal ET44 w/ 255/40 17 RE01R’s (2.2 degrees camber front/ 2.0 degrees camber rear, 0 toe)
race setup: 18x10 FN01R-C bronze ET35 w/ 285/35/18 Hoosier a6’s (3.6 degrees camber front/ 2.0 degrees camber rear, 1/4 toe out)
j/k