K-Sport 8/6 pot brakes, PBM HMIC, Cusco, Greddy, ACT, etc.

Classifieds
1

Hey gents, copying this thread over from SON… converting prices into USD

So the S14 is being parted out and here are some items available:

  • K-sport 8/6 piston brake kit - cal, rotors, pads, lines etc. (powdered red) $1600
  • Tomei Trax 2-way diff (S14 carrier w Nismo bushings) - $600
  • PBM high mount IC kit - $350
  • Custom Spec Auto Catch can set up… vented with braided lines - $200
  • GENUINE Greddy Type S - best BOV on earth and stll chirps - $175
  • Stainless downpipe, ugly as hell, but with the bracket and an O2 bung welded into it - $60
  • 3" cat that is like a year old but with a chunk of the ceramic blown out… yay - $50

Wiring Specialties Harness - S13 into S14 wired for MAP - $300
[FONT=Verdana]ISIS PRO - bottom mount manifold Schedule 40 steel - $225[/FONT]
[FONT=Verdana]Stainless 3” turbo extension - $50[/FONT]
[FONT=Verdana]Splitfire coilpacks - $250[/FONT]
[FONT=Verdana]Cusco engine and tranny mounts (brand new) - $175[/FONT]
[FONT=Verdana]ACT stage 3 sprung street strip clutch & [/FONT][FONT=Verdana]Unknown lightened flywheel, 11lbs approx, balanced… play in disc but PP nad flywheel are great - $200 for all[/FONT]
[FONT=Verdana]

[/FONT]
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/10425127_10205072466685425_1520510088512929059_n.jpg?oh=9e18d74e49f981e734b2bff6a4404b92&oe=55873295&gda=1435240426_cb4462dac609931f3a577224713b3aca

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/10168198_10205072464085360_6964208762560606000_n.jpg?oh=986c0d08c6dd7c51ef784f270db3913f&oe=5590AD05&gda=1435722362_9a6e5a0419e1310ca136de51fdba13b8

2

If you part out the Engine lmk. I’ll take the injectors bing

3

i have a few dudes already inquiring about the injectors and i MAY do that but it depends on the offer. those injectors are over $700 right now and they literally went into the car a few thousand km’s ago so i would need like $500ish to pull them out.

in general, while i WILL part the accessories off the engine i would need near market price per part to do that whereas if someone comes and buys the whole thing they’ll get a swan song deal…

we checked the turbo tonight and it is totally fine, very minor shaft play, a couple mm front to back and side to side… there was some noise when driving but that was likely a combo of intake / exhaust noise with a leak and because of the catch can set up routed back into the exhaust.

coilovers, rad set up and AEM EMS were picked up tonight and removed from the lead post.

*edit - just to update… my cost on the Tomei 740cc injectors was $608 USD… YOWZA!!!

4

many pictorz:

http://www.bings.ca/images/parts/Ksport%20Brakes%20(2).jpg

http://www.bings.ca/images/parts/Ksport%20Brakes%20(1).jpg

why do i have these defi gauges still???

5

added some more junk

6

tru boost gone

7

updated lead post… most stuff gone but still some solid stuff left.