rb20det 525cc injectors and gtr brake system

Classifieds
1

Hi guy!

I got these parts for my car but I am about to sell the car and no need for these parts,

I have a Delphi 525cc injectors for rb20det (may fit rb26dett)
Home » DELPHI INJECTORS

Product ID: 17113738
DELPHI 50lb/hr INJECTOR

DELPHI 50 LB/HR INJECTORS

Part Number 17113738 (OE # 17104487)

Static Flow Rate: 50.0 lb/hr @ 43.5PSI (300kPa) 525cc/min or 6.4gm/sec

Static Flow Rate: 57.7 lb/hr @ 58.0PSI (400kPa) 606cc/min or 7.4gm/sec

Dynamic Flow Rate: 1.1 gm/pulse - 2.5ms pulse width and 10ms repetition rate @ 43.5PSI (300KPa)

Dynamic Flow Rate: 1.3 gm/pulse - 2.5ms pulse width and 10ms repetition rate @ 58.0PSI (400KPa)

Coil Resistance: 12 Ohms / High Impedance / High-Z (No ECM driver modifications required)

Cone Spray Angle - 22.4 degrees - Single spray cone. Approximate cone angle for 90% of spray volume

Ball/Seat Design with 6-Hole Diffuser Disc
http://img200.imageshack.us/img200/4340/1711381342lb8.th.jpg

And I have a set of front gtr brake system: calipers, pads, rotors and brake lines.
http://img41.imageshack.us/img41/7861/1262fkm20.th.jpg

I am looking for $350obo for the injectors and $200obo for the gtr brakes.

2

I’ll let the injectors+rb26 fuel rail+rb20 resistor box for $300 or injectors only for $250.
The brakes now $150 firm.

3

bump it.

Buy them guys or let me know what you have to trade.

4

wtf is a resistorbox for the rb20??? lol… intrested in the injectors fella they new… used… should be straight drop in plus tuning correct for a rb20?

5

No I have a resistor box from a rb20det (as the injectors were bought for a rb20det engine) and yes they are used for about 600kms and them off and they are straight drop in plus correct tunning ofcourse onto a rb20det engine.
give me a call at 416 728 6315

6

injectors are sold.

7

bump, first 4120 gets the brakes.

let me know what u have for trade (honda beat parts?)

8

I meant first $120.

9

How good are pads/rotors?

10

I’ll say that the rotors and pads are in 80% condition.