Spring Parts Swap - Suspension, Brakes, Methanol, etc.

I’ve accumulated a bunch of parts over the winter throughout my build, lets use this thread to swap/buy/sell some parts!
I won’t be using this stuff, so I’d like to sell or swap.
I might not get any hits, but it’ll be on a couple of forums, lets see what you have.

What I want (I’ll trade for these parts):

  • Z32 front brakes with SS braided conversion lines
  • Only interested in Hawk HP+ pads for these
  • Z32 15/16" BMC
  • 17" race tires maybe (V710, A6, C71 Hankooks) - 245 or wider
  • Cash
  • Other interesting trades

What I have (Copied from my various threads):

Godspeed Adjustable RLCA

Not going to be using the rears right now.
They’re the top ones in the pic, brand new in box.

http://lh3.ggpht.com/_bPcbild_wyQ/S1jTdBye0DI/AAAAAAAAA6E/Z2HOP0GTI_I/100_0347.JPG

Methanol Injection Kit

I bought this over the winter and never installed it.
The guy said a local guy (In Nova Scotia) makes them and sells them.
It uses a Shurflo pump (recommends 50/50 mix), and the parts shown below.
This was a “BNIB” buy, I haven’t had time to look into the install.

http://lh6.ggpht.com/_bPcbild_wyQ/S8jJafgAUKI/AAAAAAAACW8/iGue1HVfBAA/s640/Methanol%20Injection%20Kit.jpg

Tanabe Sustec " Drift braces"

The front braces your tension rod brackets from frame rail to frame rail.
The rear braces your sub frame to the chassis on both sides.
Looking for $250 shipped.

http://www.tanabe-usa.com/other/files/23_img1.jpg

http://www.tanabe-usa.com/other/files/79_img1.jpg

Sorry I didn’t specify, the rears are for an S14, the fronts fit both S13 and S14.

Real Pics:

http://lh6.ggpht.com/_bPcbild_wyQ/S7JCdLTDRDI/AAAAAAAACGs/wZZoAhQUxJc/100_1019.JPG

http://lh5.ggpht.com/_bPcbild_wyQ/S7JCd03Hx0I/AAAAAAAACHY/BUPZYg_eLOs/100_1020.JPG

http://lh4.ggpht.com/_bPcbild_wyQ/S7JCepdPEtI/AAAAAAAACG4/VFI-t4kco9A/100_1022.JPG

http://lh6.ggpht.com/_bPcbild_wyQ/S7JCfC5fQ5I/AAAAAAAACHg/TjVXtbxiIGs/100_1023.JPG

Got a request in another thread for installed pics:
They bolt near the back of the transmission tunnel, and then at the front-rear subframe cups.
They wouldn’t require removal of the subframe or anything like that.

http://lh3.ggpht.com/_bPcbild_wyQ/S7JI8fnbPTI/AAAAAAAACJo/N3crt15Akb4/IMG_1917.jpg

http://lh6.ggpht.com/_bPcbild_wyQ/S7JI8VsCmEI/AAAAAAAACJk/pSweYCM1wMA/IMG_1922.jpg

http://lh5.ggpht.com/_bPcbild_wyQ/S7JJMVJ1C9I/AAAAAAAACKE/_VeSSH5gIBU/IMG_1925.jpg

GTSpec Turbo Elbow
I took this from my GT2871R turbo, so it will bolt up to any t25/28 turbo. For an SR20Det.
http://www.gtspec.com/index.php?nav=products_category&pid=171&cat=111
MSRP: $199 USD
Asking $130 CAD

http://www.gtspec.com/images/s14-turbooutlet.jpg

Autometer Cobalt Transmission Temperature Gauge
Brand new in box.
I bought this new, and never used it. It’s been opened to inspect, but never left my house or the box.
http://www.autometer.com/cat_gaugedetail.aspx?gid=3434&sid=4
MSRP: $70 USD
Asking: $50 CAD

http://www.autometer.com/img/products/6149_d.jpg

Brembo GT 13" 4 Piston BBK

Lets reserve this for the “Ballers”.
MSRP on this kit is about 3K.
I’ll accept 2K. (Cash + Trades)
I know I’m not going to get any bites for this, but why not list it.

If you’ve got some interesting trades it could work.
Includes the kit + upgraded Endless Blue “M” Pads (also Brembo pads)

Brembo Gran Turismo front big brake system for a 5-lug 240SX.
Specs:
GT 4-Piston calipers (F50-Type) - Red
Drilled 2-piece vented 332x32mm rotors (13" rotors)
HP1000 pads
Braided lines

Kit 1B1.7012A in this table I made up to show the similarities to the 300Zx and 350Z kits.

This type:
http://www.tirerack.com/images/brakes/brembo/gt_styles/style_3.jpg

Here’s some additional info on the kit. (Style 3C)
Brembo Gran Turismo Brake Systems

Brembo GT Site - Insert Nissan 240SX

http://www.brembo.com/CatalogoHPGT/Templates/SearchHPGT.aspx?NRMODE=Published&NRNODEGUID={0DECE949-F261-4E29-A729-C4A049DD61FE}&NRORIGINALURL=%2FUS%2FPerformance%2FGranturismoCatalogue%2F&NRCACHEHINT=NoModifyGuest

Lets see what you have.
These are some good parts, lets trade some stuff.

Methanol Kit no longer for sale.
Godspeed arms and front Tanabe brace spoken for (Rear Tanabe’s still available).

No longer interested in the Z32 fronts for trade.
Offer away.

If you still want a 15/16 bmc I got one that I just took off. In fulling working order. Shoot me an offer.

I had a guy offer me one for $50 (a 15/16 or a 1") about a month ago, but it now looks like I’ll have a 7/8" and 17/16" on hand.
I didn’t buy it from the guy at the time, and now it’s gone. Not sure how many BMC’s I really need kicking around…lol
I think I’ll pass for now, as I don’t really have any $$ for mods, and people usually want $75-$100 for them.
Thanks though.

What? You can never have too many BMC’s! JK’s!

haha, no worries.

Haha, how much were you selling it for anyway.

John you want one?

I have one kicking around. Actually, I think I have 2

PM me, I’m sure we can work something out

I was thinking $60 bucks or so. I just want to get rid of it… not really looking to make money… so you can make me an offer on that $60. How much do you want for those rear tanabe braces you got left?