Looking to get a set (front and rear) of hub-centric spacers. Something like H&R would be nice.
Looking to get:
Front 5mm or 10mm
Rear 10mm or 15mm
Let me know what you have in terms of prices.
i got a pair of 15mm bolt on spacers.
i think they are Kicks hubcentric
has a key as well, the key is slightly bent (4 nipples). was overtorqued a bit but can be straightened out easily then heated back.
$70
Are they 5-bolt?
Pics? Not sure what you are talking about, when you say “Key”
its 5bolt
and about the key.
when the spacer goes onto the studs, it has a nut that goes onto the studs to lock it in place. the nut has 4 nipples. to put it on or off, you need the key that has the 4 nipples to tighten or take off the nuts. its basically a security feature so no one can steal your spacer.
ill try and get pics tonight if you are interested.
the nipples for the key is just short of 1cm long
these are them
^^ awesome avery
thanks!
great quality, i just overtorqued them with a breaker bar back then when i was dumb. used them many times b4 with impact gun (100ft lb tq) and etc no problems at all.
ps: you can easily replace those bolts with non-key type bolts so the key is not needed.
the spacer itself is excellent shape, just the key is slightly bent.
no biggie.
Would you happen to know the length of those studs?
entire length of the stud is 1.75" (4.5cm) and the length that is exposed is 1.25" (3.2cm)
all numbers are accurate within less than 1/2 cm