dezod  
                
                  
                    July 7, 2009,  9:48am
                   
                  1 
               
             
            
              
All of the following items are in stock and ready for pickup. These are priced to move and pricing is contingent upon inventory on hand.
PLEASE SEND A PM FOR PRICING 
SS EGT Bung 
SS O2 Bungs 
V-Band  3" flange (1) and clamp 
V-Band Clamp 2 1/2" 
T3 Flange 
T25 Flange 
J Oxygen Sensor Bung 
2’’<2.25’’ Coupler 
Tial Wastegate Springs (3 PSI, 5 PSI and 10 PSI) 
Tial Blow Off Valve 11 PSI Spring 
Precision Intercooler Core (no end tanks) 
D17 Turbo Log Manifold 
2.5" Dry Flow Synthetic Air Filter 
Black HKS Blow Off Valves 
T3 Turbine Inlet Gaskets 
19" -10AN Oil Drain lines 
1/2" NPT Fittings 
CHRA Discharge Flanges for T3/T4 turbos 
1/8 NPT T-fttings 
TiAL  Steel BOV Fitting 
TIAL WG Banjo Fittings 
TiAL 38mm Gaskets 
T4 Divided Inlet Flange 
AEM Serial Data Guages 
1NZFE Head Manifold Flange 
2.25’’ Couplers 
2.5’’ Couplers 
2.25’’<2.5’’ Couplers 
2’’ Couplers 
Vac Manifolds 
xA/xB Stage 1 Clutch 
Pipe To A Straight 1/2 8AN Male 
Straight, Swivel 8AN Female 
45 Degree Swivel 8AN Female 
SST, Braided Hose 8AN 
SST, Braided Hose 6AN 
90 Degree Swivel 10AN Female 
150 Degree Swivel 8AN Female 
150 Degree Swivel 6AN Female 
90 Degree Swivel 8AN Female 
45 Degree Swivel 6AN Female 
Pipe To A Straight 1/8 6AN Male 
Pipe To A Straight 3/8 10AN Male 
Pipe To A Straight 3/8 8AN Male 
Pipe To A Straight 1/4 6AN Male 
Plug 10AN Male 
36" -3AN oil feed line 
AEM Water/Methanol Injection Kit 
Tc Brake Lines 
Worm Gears 
2.25’’ Clamps 
2.5’’ Clamps 
2’’ Clamps 
Motul 300V Chrono 10W40 
Motul 8100 Eco-nergy 5W30 
Motul Gear 300 75W90 
Motul 90 PA Diff Fluid 
Motul DOT 5.1 
Motul ATF Technosynthese 
Motul Fuel System Clean 
Motul Engine Clean 
Motul Air filter Clean 
Motul Moto Wash 
Motul Wash And Wax 
Vibrant SS Hangers 
Vibrant Flange 3 Bolt 3 Inch flange 
Vibrant Flange 3 Bolt 2.5 Inch flange 
T25 Discharge Flange 
Vibrant Couplers 2.25’’<2.75’’ 
StopTech EVO 9 SS Brake Line kit 
Dezod C5/C6 brake pads front and rear 
 
             
            
              
            
           
          
            
              
                dezod  
              
                  
                    July 8, 2009,  6:59am
                   
                  4 
               
             
            
              All PMs responded to. FYI, all of the AN fittings are Mr. Gasket Shadow Series to clarify on some of the PMs I have received. Thank you to all who have gotten quotes, and we look forward to doing business with you all.
             
            
              
            
           
          
            
              
                dezod  
              
                  
                    July 9, 2009,  6:49am
                   
                  5 
               
             
            
              All PMs responded to. Yes, all parts are to be picked up at our Bailey Ave location
             
            
              
            
           
          
            
              
                dezod  
              
                  
                    July 10, 2009,  6:40am
                   
                  7 
               
             
            
              
 Carnut:
 
Good deals.
 
 
Thanks Don! Glad we could help you out.  :eekdance:
I like that little emoticon. LOL
:eekdance: 
             
            
              
            
           
          
            
            
              I might swing by today and get a few t-bolt clamps and couplers ffrom ya.
             
            
              
            
           
          
            
              
                dezod  
              
                  
                    July 14, 2009,  8:07am
                   
                  9 
               
             
            
              
Ok. If you are in a rush, let us know what sizes and such you need so we can have them ready for ya.
             
            
              
            
           
          
            
              
                dezod  
              
                  
                    July 14, 2009,  8:23am
                   
                  10 
               
             
            
              List updated. Sold out of 2>2.5" transitions
NOTE: On C5/C6 pads, purchase fronts at reduced cost, get rears FREE!
     On EVO 8 brake lines, purchase front or rear, and get mating opposite FREE! 
            
              
            
           
          
            
              
                dezod  
              
                  
                    July 15, 2009, 10:18am
                   
                  11 
               
             
            
               NOTE: On C5/C6 pads, purchase fronts at reduced cost, get rears FREE! 
     On EVO 8 brake lines, purchase front or rear, and get mating opposite FREE!</b> 
SCREAMIN DEAL HERE
             
            
              
            
           
          
            
              
                dezod  
              
                  
                    July 17, 2009,  8:52am
                   
                  12 
               
             
            
              Thanks for the recent orders! List has been updated.
             
            
              
            
           
          
            
              
                dezod  
              
                  
                    July 24, 2009, 11:41am
                   
                  14 
               
             
            
              One of the items we have in stock on this special is our own CNC CHRA Oil Discharge Flange for T3/T4 turbos.
We have approx 80 of these in stock, priced to move at less than $10 out the door!
             
            
              
            
           
          
            
            
              can i ask why prices cant be listed? everyone get a different price?
             
            
              
            
           
          
            
              
                dezod  
              
                  
                    July 27, 2009,  7:21am
                   
                  16 
               
             
            
              
No, not at all. Many of the prices are too low to post. A simple PM will prove.
             
            
              
            
           
          
            
            
              thats cool figured id ask, ive seen to many shops do that… and its the reason i dont support many local business’s… maybe ill stop in some time…
             
            
              
            
           
          
            
              
                dezod  
              
                  
                    July 27, 2009,  1:01pm
                   
                  18 
               
             
            
              
Sure, swing by sometime. Why is that? Pricing?
             
            
              
            
           
          
            
            
              na i was into audio for so long, most of the shops around here kinda showed thier true colors if i wasnt buying thier stuff…  atleast ive moved on finally… sorry for the slight ot rambling…lol…and no  price isnt much of a factor, if i want it im buying it …lol…
             
            
              
            
           
          
            
              
                dezod  
              
                  
                    July 28, 2009,  7:15am
                   
                  20 
               
             
            
              
 yunvme666:
 
na i was into audio for so long, most of the shops around here kinda showed thier true colors if i wasnt buying thier stuff…  atleast ive moved on finally… sorry for the slight ot rambling…lol…and no  price isnt much of a factor, if i want it im buying it …lol…
 
 
Gotcha! Some companies play that game, but we do not. Let me know if there is anything you need.