FS: 10++++ Setssssss of JDM WHEELSSSS ! ! ! ! "PICSSSSSSSSSsssss"

Classifieds
1

What you see on the FIRST PAGE here is what’s available. Any other ones you see in this thread are SOLD already ! ! !

*** PAYMENT PLAN Available ***, Pls PM for details

*** REFINSH SERVICE Available *** Pls PM for Details ***

Product: Work VS-TX Limited Edition

Details: Exclusive VS-TX, each wheels are serial plated. This set could be one of the most rare combination (burning black face / red cap). This set is 100% original (lip / barrel / valve stem / caps / etc…). All it needs are some detail cleaning and could use a polish to the lip

19x9 +23, approx. 12.0kgs *** O-Disk ***
19x10 +23, approx. 12.5kgs *** O-Disk ***

Price: $2999 USD + Shipping

Via sea (4-6 weeks) to Can = $140 USD
Via sea (4-6 weeks) to US = $275 USD
Via air (5-7 days) to Can/US = $525 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%204/Work%20VS%20TX%20GM%20-%2028%20Jan%202015/IMG_4671_zpssl0sh0jb.jpg

Product: Junction Produce Scara

Details: Completely refinished in gloss black with polish lip, no tires were mounted or install after the refinish. All original hardwares along with center caps / valve stem / caps. All inner decals are original as well. Only one flaw, one of the rear wheel had a small weld on the inner barrel. Rest are all in tip top shape

19x9 +17, approx. 11.6kgs, 3.25" lip
19x10 +30, approx. 11.7kgs, 4.0" lip

Price: $2499 USD + Shipping *** PM me if you want just the face/hardwares for cheaper ***

Via sea (4-6 weeks) to Can = $140 USD
Via sea (4-6 weeks) to US = $275 USD
Via air (5-7 days) to Can/US = $525 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%203/Junction%20Produce%20Scara%20-%2023%20Jun%202014/IMG_5036_zpsa6b11790.jpg

Product: Weds Kranze LX-Z

Details: One of the most sought after Weds wheels, all original lip/barrel/face, original chrome finish. Only some very minor bubble on few spots, the center cap clear coat oxidation can be sanded off easily.

19x9.5 +35, approx. 2.75" lip, 12.9kgs
19x10.5 +38, approx. 3.25" lip, 12.9kgs “CONCAVEDDDDD”

Price: $2299 USD + Shipping *** PM me if you want just the face/hardwares for cheaper ***

Via sea (4-6 weeks) to Can = $140 USD
Via sea (4-6 weeks) to US = $275 USD
Via air (5-7 days) to Can/US = $525 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%203/Weds%20Kranze%20LXZ%20-%2023%20Jun%202014/IMG_4905_zps52f06ff5.jpg

Product: Volks GT-7

Details: Semi Forged, 2 piece design. Excellent original condition, just few chips here and there, all original center caps / valve stem / valve caps / decals.

19x8.5 +33, approx. 11.5kgs, 3" lip
19x9.5 +36, approx. 11.3kgs, 4" lip

Price: $1899 USD + Shipping *** PM me if you want just the face/hardwares for cheaper ***

Via sea (4-6 weeks) to Can = $140 USD
Via sea (4-6 weeks) to US = $275 USD
Via air (5-7 days) to Can/US = $525 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%203/Volks%20GT-7%20-%2012%20Aug%202014/IMG_6872_zps63caf38e.jpg

Product: Work VS-KF

Details: All original wheel, chrome has some chipping spot, previous owner probably had it plastic dip, most of the dip are cleaned up except some hidden behind the spokes and some near the bolts. Great size wheel

19x9 +34, approx. 14.2kgs, 2.5" lip
19x10 +28, approx. 14.6kgs, 4" lip

Price: $1699 USD + Shipping *** PM me if you want just the face/hardwares for cheaper ***

Via sea (4-6 weeks) to Can = $140 USD
Via sea (4-6 weeks) to US = $275 USD
Via air (5-7 days) to Can/US = $525 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%204/Work%20VS-KF%20Chrome%20-%207%20Nov%202014/IMG_1499_zpsd3445376.jpg

Product: Work Emotion XC8

Details: Very rare wheel in the US side, this set is in MINT condition with only very few small paint chip. Few small spot were color matched after removing some small rashes. All original, paint in overall very nice shape, all original valve stem/cap/decals…

19x9 +25, approx. 13.1kgs
19x10 +20, approx. 13.5kgs “CONCAVEDDDDDD”

Price: $1599 USD + Shipping

Via sea (4-6 weeks) to Can = $140 USD
Via sea (4-6 weeks) to US = $275 USD
Via air (5-7 days) to Can/US = $525 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%203/Work%20XC8%20-%2011%20May%202014/IMG_1624_zpsbd68d317.jpg

Product: Riverside MAE Dish

Details: My personal favour VIP wheel :), lip portion are in great shape, the clearcoat on the face is coming off and will need to be clean/reclear sooner or later. 2 piece welded, face can be remove for easy DIY paint/sand/refinish.

19x8.5 +41, approx. 12.2kgs, 2.25" lip
19x9.5 +41, approx. 12.6kgs, 3.25" lip

** 5x114.3 & 4x114.3 bolt pattern **

Price: $1499 USD + Shipping *** PM me if you want just the face/hardwares for cheaper ***

Via sea (4-6 weeks) to Can = $140 USD
Via sea (4-6 weeks) to US = $275 USD
Via air (5-7 days) to Can/US = $525 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%203/Riverside%20MAE%20Dish%20-%2022%20May%202014/IMG_2280_zpscb0cedde.jpg

Product: Riverside TrafficStar EXE2

Details: Very rare wheels in the US side, completely refinished in Japan right before I got it. Comes complete with all original stickers/center caps/valve stems/etc.

19x9 +26, approx. 13.2kgs, 2.75" lip
19x10 +35, approx. 13.6kgs, 3.25" lip

Price: $1399 USD + Shipping *** PM me if you want just the face/hardwares for cheaper ***

Via sea (4-6 weeks) to Can = $140 USD
Via sea (4-6 weeks) to US = $275 USD
Via air (5-7 days) to Can/US = $525 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

TrafficStar EXE2 - 30 Dec 2013 Photos by Rexchris66 | Photobucket

Pictures of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%203/TrafficStar%20EXE2%20-%2030%20Dec%202013/IMG_9060_zps845f36df.jpg

Product: TRD Premium

Details: Rare forged 2 piece wheel made by Rays Japan. Overall in very very good condition, comes complete with all original cap/valve stem & cap and all inner stickers.

TRD Website: http://www.trdparts.jp/english/parts_wheel-premium.html

19x8 +40, approx. 12.2kgs, 2" lip
19x8.5 +46, approx. 12.3kgs, 2.25" lip

Price: $1399 USD + Shipping *** PM me if you want just the face/hardwares for cheaper ***

Via sea (4-6 weeks) to Can = $140 USD
Via sea (4-6 weeks) to US = $275 USD
Via air (5-7 days) to Can/US = $525 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%203/TRD%20Premium%20-%205%20Jun%202014/IMG_2961_zps60428725.jpg

Product: Work VS-MX

Details: Very good original condition, original lip / cap / hardware, great spec for a rebuild.

19x8.5 +38, approx. 13.3kgs, 1.5" lip
19x9.5 +45, approx. 13.3kgs, 2.5" lip

Price: $1399 USD + Shipping *** PM me if you want just the face/hardwares for cheaper ***

Via sea (4-6 weeks) to Can = $140 USD
Via sea (4-6 weeks) to US = $275 USD
Via air (5-7 days) to Can/US = $525 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%203/Work%20VS-MX%20-%2022%20Jul%202014/IMG_6376_zps7ec48fdc.jpg

Product: AME Shallen LX

Details: Fat lip VIP style, 2 piece welded. Overall in pretty good shape, the lip could use some nice cleaning. Face has some minor light scratches.

19x8.5 +43, approx. 13.4kgs, 4" lip
19x9.5 +38, approx. 13.7kgs, 4.75" lip

Price: $1399 USD + Shipping

Via sea (4-6 weeks) to Can = $140 USD
Via sea (4-6 weeks) to US = $275 USD
Via air (5-7 days) to Can/US = $525 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%203/AME%20Shallen%20LX%20-%208%20May%202014/IMG_1432_zpse8c30341.jpg

Product: SSR Vienna Dish I

Details: 3 piece wheels with welded barrel. Very good condition for all 4 wheels, got one issue. Two front wheels are different size (one is 8.5, one is 9.0). Rear pair is in excellent shape. I am selling these at below my cost, perfect for those looking to rebuild a set to your own spec

Front #1 - 19x8.5 +30 “Lo Disk”, approx. 12.7kgs, 3" lip
Front #2 - 19x9.0 +31 “Hi Disk”, approx. 13.5kgs, 2.5" lip

Rear - 19x10 +37 “Lo Disk”, approx. 13.5kgs, 3.5" lip

Price: $849 USD + Shipping *** PM me if you want just the face/hardwares for cheaper ***

Via sea (4-6 weeks) to Can = $140 USD
Via sea (4-6 weeks) to US = $275 USD
Via air (5-7 days) to Can/US = $525 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%203/SSR%20Vienna%20Dish%20I%20-%2013%20Apr%202014/IMG_0282_zps0cd3dc6f.jpg

2

Product: BBS LM

Details: Super RARE custom build set, I used ORIGINAL BBS face / barrel / nuts / bolts. Faces were (Two 18x8 +35 & Two 18x9 +20), barrels were from the biggest available 18x10. This set will clear BBK. COMPLETELY refinished in original gold / polished lip. Not a cent spared on this build

18x10 +10 offset, approx. 10.8kgs

Price: $2999 USD FIRM + Shipping

Via sea (4-6 weeks) to Canada = $125 USD
Via sea (4-6 weeks) to USA = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%204/BBS%20LM%20Gold%20-%2013%20Jan%202015/IMG_3908_zps087cef5e.jpg

Product: SSR Professor SP3

Details: One of the more rare from the Professor lineup, 3 piece welded. Original matte black finish with polish lip. This set is super minty condition, one of the front wheel is brand new (still have the rim wrapper). The other 3 are in very very good condition. Complete with all original center caps / valve stem / caps / etc…

18x9 +19, approx. 10.2kgs *** Hyper Disk, will clear BBK ***
18x10 +11, approx. 10.5kgs *** Normal Disk ***

Price: $2399 USD + Shipping

Via sea (4-6 weeks) to Canada = $125 USD
Via sea (4-6 weeks) to USA = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%204/SSR%20SP3%20Black%20-%2014%20Jan%202015/IMG_3984_zpsab664aa5.jpg

Product: Work Equips

Details: 100% original condition non-step, original chrome face / polish lip, very good condition. Comes complete with original hardwares / “Work” valve cap / stems / etc…

18x8.5 +28, approx. 10.3kgs, 3" lip
18x9.5 +28, approx. 11.1kgs, 3.5" lip

Price: $2099 USD + Shipping

Via sea (4-6 weeks) to Canada = $125 USD
Via sea (4-6 weeks) to USA = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%204/Work%20Equip%20Non-Step%20CH%20-%2024%20Nov%202014/IMG_2397_zps7a11d037.jpg

Product: Volks TE37

Details: Recently refinished, completely forged light weight, new face decal, all original hardwares, few small paint chipped off the edges, rest are minty and shiny

18x8.5 +35, approx. 8.3kgs
18x9.5 +40, approx. 8.5kgs

Price: $1999 USD + Shipping

Via sea (4-6 weeks) to Canada = $125 USD
Via sea (4-6 weeks) to USA = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%204/Volks%20TE37%20Gold%20-%2022%20Sept%202014/IMG_9454_zpsbe575990.jpg

Product: Volks TE37

Details: All time favour for all, mono forged light weight wheel. It was completely refinish recently in bright silver. There’s few small chip and one of the front wheel has some light scratch on the spoke (sanded off and color matched already). Comes complete with all original hardwares / decal / size stickers.

18x8.5 +40, approx. 8.1kgs
18x9.5 +35, approx. 8.6kgs

Price: $1999 USD + Shipping

Via sea (4-6 weeks) to Canada = $125 USD
Via sea (4-6 weeks) to USA = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%203/Volks%20TE37_Silver%20-%202%20July%202014/IMG_5543_zps64bcd19f.jpg

Product: Work Equip DDC

Details: Very good original condition, comes complete with all original lip/barrel/face (chrome). All inner decals are fully intact, just a few small chip on the lip/edge

18x9 +47, approx. 11.3kgs, 3" lip
18x10 +17, approx. 11.8kgs, 3"+ lip

Price: $1999 USD + Shipping *** PM me if you want just the face/hardwares for cheaper ***

Via sea (4-6 weeks) to Canada = $125 USD
Via sea (4-6 weeks) to USA = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%204/Work%20Equip%20DDC%20-%207%20Oct%202014/IMG_0446_zpsd6ccc1e8.jpg

Product: Work VS-XX

Details: Completely refinished in a PEARL SILVER, all original lip / face / barrel (never been relip/rebarrel). Comes complete with original hardwares (caps/ valve stems / valve caps / etc…)

18x9 +26, approx. 11.7kgs, 3.5" lip
18x10 +21, approx. 12.4kgs, 3.5" lip

Price: $1999 USD + Shipping

Via sea (4-6 weeks) to Canada = $125 USD
Via sea (4-6 weeks) to USA = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%204/Work%20VS-XX%20P%20Silver%20-%2023%202014/IMG_9751_zpsed1f0ce0.jpg

Product: Work Equip

Details: Completely refinished in Diamond Black (face / bolts), the lip is polished and clear coated. Few small tiny imperfection on the paint, and there one small spot of weld on the inner barrel on the front wheel (no leak).

18x8.5 +35, approx. 11.1kgs, 2.25" lip
18x9.5 +40, approx. 10.6kgs, 3.0" lip

Price: $1999 USD + Shipping

Via sea (4-6 weeks) to Canada = $125 USD
Via sea (4-6 weeks) to USA = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%204/Work%20Equip%20DBK%20Step%20-%204%20Sept%202014/IMG_7979_zps32cfdfe7.jpg

Product: TRD Sport Forged

Details: Made by Rays Japan, full forged wheel. Completely refinished in semi matte bronze (inside and outside). All original valve stem / rays caps, new spoke decals. The rear pair is a very very rare size made specially for the JZA80 Supra back in the days.

18x8.5 +45, approx. 9.2kgs
18x9.5 +38, approx. 9.6kgs

Price: $1699 USD + Shipping

Via sea (4-6 weeks) to Canada = $125 USD
Via sea (4-6 weeks) to USA = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%204/TRD%20Sport%20Bronze%20-%2029%20Jan%202015/IMG_4762_zps9nfqnl0b.jpg

3

Those 18" LMs are the gold F1 Edition. Awesome SUPER rare set of wheels.

4

Product: Work Emotion XD9

Details: Last buyer backed out, this set is super mint mint mint condition. Complete original condition with all decals/hardwares. Only a few small chip, rest are SUPER MINT ! ! !

18x8 +35, approx. 10.9kgs, 2"+ lip
18x9 +20, approx. 11.5kgs, 2.5"+ lip

Price: $1499 USD + Shipping

Via sea (4-6 weeks) to Canada = $125 USD
Via sea (4-6 weeks) to USA = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%203/Work%20Emotion%20XD9_White%20-%2019%20Jun%202014/IMG_4710_zps21f2fe8c.jpg

Product: Veilside Andrew V

Details: Completely refinish in gloss black / polish (clear coated) lip, very rare size / setup. Only one flaw on it, one of the front wheel has a very small crack on the inner barrel, its been completely welded and smoothed out. Perfectly round and sound

18x9 +40, approx. 11.4kgs, 2.25" lip
18x10 +40, approx. 12.1kgs, 2.75" lip

*** 5x114.3 & 4x114.3 pattern ***

Price: $1499 USD + Shipping

Via sea (4-6 weeks) to Canada = $125 USD
Via sea (4-6 weeks) to USA = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%203/Veilside%20Andrew%20V%20-%2014%20Aug%202014/IMG_7088_zps0926d040.jpg

Product: Work Termist S1C

Details: Much more rare version of the famous Meister S1, the S1C has a special finish and the “WORK” engraved on the 10 o’clock position of the face. Only down size is the faces are mounted on a welded barrel. These are perfect rebuild specs to some fat ass setup.

18x7.5 +39, approx. 10.1kgs, 2.5" lip

Price: $1499 USD + Shipping *** PM me if you want just the face/hardwares for cheaper ***

Via sea (4-6 weeks) to Canada = $125 USD
Via sea (4-6 weeks) to USA = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%204/Work%20S1C%20Termist%20-%2022%20Oct%202014/IMG_0895_zps2658df9e.jpg

Product: Manaray Sport MS-5

Details: Very very rare wheel, true 3 piece design. The lip had been completely polished, the face has some clear coat oxidation. One of the inner barrel has a weld mark (holds air perfectly). This specific set was off a JDM R33 GTR

18x10 +17, approx. 11.2kgs, 3.25" lip

Price: $1399 USD + Shipping *** PM me if you want just the face/hardwares for cheaper ***

Via sea (4-6 weeks) to Canada = $125 USD
Via sea (4-6 weeks) to USA = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%203/Manaray%20MS-5%20-%208%20Aug%202014/IMG_6763_zps5255057c.jpg

Product: Volks GT-U

Details: Semi forged two piece wheels, rear wheels are in excellent condition, front pair has some brake dust and dirt mark that can be cleaned up with some patient. All original, complete with all original stickers/decals/valve stem/caps.

18x8 +30, approx. 10.5kgs, 2.25" lip
18x9 +38, approx. 10.4kgs, 3.25" lip

Price: $1399 USD + Shipping *** PM me if you want just the face/hardwares for cheaper ***

Via sea (4-6 weeks) to Canada = $125 USD
Via sea (4-6 weeks) to USA = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%203/Volks%20GT-U%20-%208%20Apr%202014/IMG_0211_zpsc422d6a4.jpg

Product: Work Rezax II

Details: All original with DDC lip, chrome face will likely to be refinished, some chipping on the side spokes and near the bolt area. Would be a nice re-building setup

18x8.5 +45, approx. 12.2kgs, 2.25" lip
18x9.5 +45, approx. 12.7kgs, 3.25" lip

Price: $1399 USD + Shipping *** PM me if you want just the face/hardwares for cheaper ***

via sea (4-6 weeks) to Canada = $125 USD
via sea (4-6 weeks) to USA = $250 USD
via air (5-7 days) to US/CAN = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%203/Work%20Rezax%20II%20DDC%20-%2013%20May%202014/IMG_1749_zps17205c64.jpg

Product: Rays GT-V

Details: Forged two piece, very rare combination, the face is RMC (Rays Metal Coating), and the lip is a custom kameleon / TI. There’s few chips / bubble on the face, and one rash on the lip. Comes with original Rays carbon center cappppp

18x8 +17, approx. 10.6kgs, 3" lip
18x9 +24, approx. 10.5kgs, 4" lip

Price: $1299 USD + Shipping *** PM me if you want just the face/hardwares for cheaper ***

Via sea (4-6 weeks) to Can = $125 USD
Via sea (4-6 weeks) to US = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%204/Rays%20GTV%20RMC%20-%2011%20Sept%202014/IMG_8515_zps17619d4d.jpg

Product: Weds Sport SA10-R

Details: 100% brand new, very very concaved, complete with center caps. Very light weight and a sick color combination :slight_smile:

18x9.5 +38, approx. 9.5kgs
18x10.5 +25, approx. 9.6kgs

Price: $1249 USD FIRM + Shipping

Via sea (4-6 weeks) to Can = $125 USD
Via sea (4-6 weeks) to US = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%204/Weds%20SA10-R%20-%2019%20Dec%202014/IMG_3482_zps12bd30a6.jpg

Product: Work Emotion CR-Kai

Details: Original version CR-Kai, previous owner had it repainted bronze at one point. Paint is not perfect, its nice from a distance, could use a refinish down the road

18x8.5 +37, approx. 10.6kgs
18x9.5 +38, approx. 11.2kgs

Price: $1199 USD + Shipping

Via sea (4-6 weeks) to Can = $125 USD
Via sea (4-6 weeks) to US = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%204/Work%20CR%20Kai%20Bronze%20-%2024%20Nov%202014/IMG_3017_zps4ed77509.jpg

Product: OZ Chrono I

Details: Pretty rare wheel in 5x114.3 pattern in stagger format, overall in pretty good condition, face decals are all brand new custom made.

18x8.5 +38, approx. 11.6kgs
18x9.5 +35, approx. 12.2kgs

Price: $1199 USD + Shipping

Via sea (4-6 weeks) to Can = $125 USD
Via sea (4-6 weeks) to US = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%204/OZ%20Chrono%20White%20-%2023%20Sept%202014/IMG_9670_zps0064e266.jpg

Product: RBT Surpass Mesh

Details: Very rare JDM wheel, true 3 piece design. All original wheel with all caps / hardwares, great potential size. Overall in very good condition

18x8.5 +33, approx. 10.5kgs, 2.25" lip
18x9.5 +41, approx. 10.7kgs, 3.0" lip

*** 5x114.3 & 4x114.3 pattern ***

Price: $1199 USD + Shipping *** PM me if you want just the face/hardwares for cheaper ***

Via sea (4-6 weeks) to Can = $125 USD
Via sea (4-6 weeks) to US = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%203/RBT%20Surpass%20Mesh%20-%2024%20Jul%202014/IMG_5474_zps1cede954.jpg

5

Product: Rays A/X Revolver

Details: Welded 2 pieces wheel, all orginal, could use a nice refinish on the face/lip. Comes with all original hardwares

18x8 +37, approx. 11.8kgs, 2.5" lip
18x9 +37, approx. 11.9kgs, 3.0" lip

*** 5x114.3 & 4x114.3 pattern ***

Price: $999 USD + Shipping *** PM me if you want just the face/hardwares for cheaper ***

Via sea (4-6 weeks) to Can = $125 USD
Via sea (4-6 weeks) to US = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%204/Rays%20AX%20Revolver%20-%2016%20Sept%202014/IMG_9093_zps3ec6b454.jpg

Product: EuroHart ND6

Details: Very rare 2-piece welded wheel, overall in pretty good original condition, some paint on the nut are chipped off. The face is in very good condition.

18x8.5 +37, approx. 12.6kgs, 2.25" lip
18x9.5 +38, approx. 12.5kgs, 3.25" lip

*** 5x114.3 & 4x114.3 pattern ***

Price: $999 USD + Shipping *** PM me if you want just the face/hardwares for cheaper ***

Via sea (4-6 weeks) to Can = $125 USD
Via sea (4-6 weeks) to US = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%203/EuroHart%20ND6%20-%2018%20Jun%202014/IMG_4382_zpsa427185f.jpg

Product: Work Euroline DH

Details: 2 piece welded, original, complete with all hardwares, all stickers fully intact. Lots of clear coat issues on the face, will need a refinish asap

18x9 +38, approx. 12.3kgs, 2.5" lip
18x10 +38, approx. 12.8kgs, 3.0" lip

Price: $899 USD + Shipping *** PM me if you want just the face/hardwares for cheaper ***

Via sea (4-6 weeks) to Can = $125 USD
Via sea (4-6 weeks) to US = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%203/Work%20Euroline%20DH%20-%203%20Jun%202014/IMG_2719_zpsbb06dc75.jpg

Product: Work Meister S1 2P

Details: 2 piece version, purposely put together double stagger for the NSX / S2000. Original lip, the faces were just refinished in gloss black (new white decals). Original valve stem / caps, overall in minty shape

17x8 +45, approx. 8.8kgs *** 5x114.3 ***
18x9.5 +46, approx. 10.3kgs *** 5x114.3 ***

Price: $2199 USD + Shipping

via sea (4-6 weeks) to Canada = $125 USD
via sea (4-6 weeks) to USA = $250 USD
via air (5-7 days) to CAN/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelssssssssss%205/Work%20S1%202P%20Black%20-%209%20Feb%202015/IMG_5326_zpskbr7lvpe.jpg

Product: Volks TE37

Details: Forged, completely refinish inside and out (gloss bronze) with new decals, double stagger setup. Only a few very minor imperfection, never used after the refinish

17x8.5 +30, approx. 7.5kgs
18x9.5 +40, approx. 8.3kgs

Price: $1999 USD + Shipping

via sea (4-6 weeks) to Canada = $125 USD
via sea (4-6 weeks) to USA = $250 USD
via air (5-7 days) to CAN/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%203/Volks%20TE37_Bronze_17_18%20-%208%20Aug%202013/IMG_6647_zpsbebf8fdb.jpg

Product: Volks GT-7

Details: Semi forged, 2 pieces construction. This set is in SUPER MINT ORIGINAL condition. Original “Nobel Gold” in color with all original hardwares / caps / valve stem and cap / etc…

17x8 +34, approx. 8.8kgs
18x10 +24, approx. 10.5kgs

Price: $1699 USD + Shipping

via sea (4-6 weeks) to Canada = $125 USD
via sea (4-6 weeks) to USA = $250 USD
via air (5-7 days) to CAN/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%204/Volks%20GT-7%20Gold%20-%2019%20Dec%202014/IMG_3374_zps82f7bb7f.jpg

Product: Work Equips

Details: FULLY FULLY FULLY refinish, top notch job on these bad boy.

17x8.5 +35, approx. 9.7kgs, 2.5" lip
17x9.5 +36, approx. 10kgs, 3.0" lip

Price: $1899 USD + Shipping

via sea (4-6 weeks) to Canada = $125 USD
via sea (4-6 weeks) to USA = $250 USD
via air (5-7 days) to CAN/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%203/Work%20Equip%20Step%20-%202%20May%202014/IMG_0996_zps1f323563.jpg

6

Product: Volks TE37

Details: All original, only touch up the lip to remove some rashes. Very good original color, some small area of clear coat discolor. New spoke decals all around

17x7.5 +40, approx. 6.7kgs

*** 5x114.3____5x114.3____5x114.3____5x114.3 ***

Price: $1799 USD for the set + Shipping

or

Price: $950 USD for the pair + Shipping, inbox me for details

via sea (4-6 weeks) to Canada = $125 USD
via sea (4-6 weeks) to USA = $250 USD
via air (5-7 days) to US/CAN = $400 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%204/Volks%20TE37%20Bronze%20-%2027%20Jan%202015/IMG_4440_zpsjmp4hkba.jpg

Product: BBS LM

Details: All original (lip / barrel / face / hardwares), rare square setup. You can gain another 7mm and 1/2 inch if you reverse mount these

17x9 +42, approx. 9.1kgs, 2" lip
17x9 +35, approx. 9.4,gs, 2.5" lip

Price: $1799 USD + Shipping *** PM me if you want just the face/hardwares for cheaper ***

via sea (4-6 weeks) to Canada = $125 USD
via sea (4-6 weeks) to USA = $250 USD
via air (5-7 days) to CAN/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%204/BBS%20LM%20Gold%20-%2018%20Oct%202014/IMG_9574_zps33701ce4.jpg

Product: BBS RS

Details: Authentic RS mesh, very rare size. I remove all the bolts/nuts and polished the lip already (all original BBS nuts/bolts will be included). The face could use some paint. Rest are all in great shape.

17x8 +0, approx. 9.2kgs (without bolts), approx. 2.5" lip
17x9 +17, approx. 9.4kgs (without bolts), approx. 2.75" lip

PRICE: $1799 USD + Shipping *** PM me if you want just the face/hardwares for cheaper ***

via sea (4-6 weeks) to Canada = $125 USD
via sea (4-6 weeks) to USA = $250 USD
via air (5-7 days) to CAN/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%203/BBS%20RS%20-%2027%20Jan%202014/IMG_9142_zpsb7829a90.jpg

Product: KeiOffice DD6

Details: SUPER Rare Wheel, ULTRA Rare size :)…Made by Rays Japan, 2 piece welded wheel. All original condition, comes with all original caps/valve stem/cap. Other than a few clear coat issue, the rest are pretty nice condition

17x9 +14, approx. 10.1kgs “Concavedddd”
17x10 +22, approx. 10.4kgs “Very Concavedddd”

Price: $1799 USD + Shipping

Via sea (4-6 weeks) to Can = $125 USD
Via sea (4-6 weeks) to US = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%203/KeiOffice%20DD6%20-%2010%20Jul%202014/IMG_5848_zps6c0d23c4.jpg

Product: Work Equip Anhelo

Details: Completely refinished, all original lip / barrel / hardwares. Flat black face with gloss black lip, few small imperfection (pls refer to photo album).

17x8 +35, approx. 10.7 kgs, 2.75" lip
17x9 +35, approx. 11.1 kgs, 3.25" lip

Price: $1650 USD + Shipping

Via sea (4-6 weeks) to Can = $125 USD
Via sea (4-6 weeks) to US = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%204/Work%20Equip%20Anhelo%20Flat%20Black%20-%2018%20Nov%202014/IMG_2669_zpsfa4aff91.jpg

Product: TRD T3 Sport

Details: Fully forged, made by Rays Japan. Very light and very strong wheel, original white finish, other than a few little curb rashes, the rest are in excellent shape.

17x7.5 +40, approx. 7.0kgs
17x8.5 +40, approx. 7.5kgs

Price: $1499 USD + Shipping

Via sea (4-6 weeks) to Can = $125 USD
Via sea (4-6 weeks) to US = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%203/TRD%20T3_White%20-%2021%20Mar%202014/IMG_9909_zps21205076.jpg

Product: Rays 57 Pro

Details: All original, welded two piece foundry Rays wheel. Face is very good condition, the lip portion could use some nice cleaning/polish. Comes with all original decals and rare center caps

17x9 +30, approx. 9.6kgs, 2.75" lip

Price: $1399 USD + Shipping

Via sea (4-6 weeks) to Can = $125 USD
Via sea (4-6 weeks) to US = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%204/Rays%2057%20Pro%20Gold%20Square%20-%205%20Oct%202014/IMG_0370_zps1450cd83.jpg

Product: Veilside Andrew V

Details: All original, true 3 pieces wheel, overall in very very good condition, comes with gold plated bolts. Include all original center caps / valve stems / etc, very rare find in these size/condition…All it needs is probably a reclear and clean up the bolts to have a nice show finish

17x8.5 +35, approx. 10.9kgs, 2.0" lip
17x9.5 +41, approx. 10.7kgs, 2.5" lip

Price: $1399 USD + Shipping *** PM me if you want just the face/hardwares for cheaper ***

Via sea (4-6 weeks) to Can = $125 USD
Via sea (4-6 weeks) to US = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%203/Veilside%20Andrew%20V%20-%203%20Jul%202014/IMG_5648_zps343b0169.jpg

Product: Rays 57C

Details: Discontinued rare size, completely refinished in Gloss Gold. Comes with Rays center caps, new decals.

17x8.5 +30, approx. 8.8kgs
17x9.5 +38, approx. 8.9kgs

Price: $1399 USD + Shipping

Via sea (4-6 weeks) to Can = $125 USD
Via sea (4-6 weeks) to US = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%204/Rays%2057C_Gold%20-%2021%20Aug%202014/IMG_7250_zps61c0c719.jpg

Product: Work VS-XX

Details: All original, overall in great condition minus a few paint chip. All Work caps/valve stem/cap are included. The lips are in great shape as well

17x7.5 +37, approx. 10.9kgs, lip size = tbc
17x8.5 +41, approx. 10.9kgs, lip size = tbc

Price: $1399 USD + shipping *** PM me if you want just the face/hardwares for cheaper ***

Via sea (4-6 weeks) to Can = $125 USD
Via sea (4-6 weeks) to US = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%203/Work%20VS-XX%20-%2018%20Jun%202014/IMG_4483_zps498d9325.jpg

Product: RegaMaster Marquis Promada

Details: Recently refinished in gloss black (original is silver I believe). No cracks / bents, some paint chip here and there. Original valve stem / valve cap, does NOT come with center caps

17x7 +35, approx. 7.4kgs
17x8 +35, approx. 7.2kgs

Price: $1299 USD + shipping

Via sea (4-6 weeks) to Can = $125 USD
Via sea (4-6 weeks) to US = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%204/RegaMaster%20MP%20Black%20-%2028%20Jan%202015/IMG_4864_zpsy4axmxgu.jpg

Product: Rays 57S

Details: Rare setup and size, very very good original condition. Rays Foundry tech

17x8.5 +30, approx. 8.8kgs
17x9.5 +38, approx. 8.9kgs “CONCAVEDDD”

Price: $1199 USD + shipping

Via sea (4-6 weeks) to Can = $125 USD
Via sea (4-6 weeks) to US = $250 USD
Via air (5-7 days) to Can/US = $500 USD

Paypal: chriskwwong@netvigator.com

Photo Album:

Picture of actual:

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelsssssssss%204/Rays%2057S%20Bronze%20-%2023%20Aug%202014/IMG_7467_zps4c2d8d16.jpg

7

bolt patterns?

8

Thanks for the interest…

All Wheels are 5x114.3 pattern if not specify ! ! ! !

9

Thanks. Unfortunately they’re all useless to me.

10

I didnt know you were on this forum too!

Bump for a great seller.

11

30 May 2013

Work Equips

18x9 +38
18x10 +35

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelssssssss%202/Work%20Equip%20DDC%20-%2029%20May%202013/IMG_2749_zps824658f9.jpg

---------- Post added at 07:09 PM ---------- Previous post was at 07:07 PM ----------

FREE SHIPPING TO CANADA (4-6 weeks), deals ends 6 June 2013, pls PM me for details

12

FREE SHIPPING TO CANADA (4-6 weeks), deals ends 6 June 2013, pls PM me for details

---------- Post added at 04:46 AM ---------- Previous post was at 04:44 AM ----------

3 Jun 2013

Blitz Type 03 (Double Stagger)

17x8 +32
18x9 +45

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelssssssss%202/Blitz%20Type%2003%20-%2029%20May%202013/IMG_2661_zpsa302e34a.jpg

13

got anything in honda FWD sizes? IE no bigger than 15 inch

14

Dont know what sort of size/offset/budget you have in mind, but I do have some rare ones here

Work RSZ-R, 15x6.5 +35, $899 USD + Ship

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelssssssss%202/Work%20RSZ-R%20-%2024%20Oct%202012/IMG_4157.jpg
http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelssssssss%202/Work%20RSZ-R%20-%2024%20Oct%202012/IMG_4157.jpg1440×1080 216 KB

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelssssssss%202/Work%20RSZ-R%20-%2024%20Oct%202012/IMG_4181.jpg
http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelssssssss%202/Work%20RSZ-R%20-%2024%20Oct%202012/IMG_4181.jpg1440×1080 134 KB

KeiOffice KS-CE, 15x6.5 +35, $899 USD + Ship

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelssssssss%202/KeiOffice%20KS-CE%20-%2012%20Aug%202012/IMG_3227.jpg
http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelssssssss%202/KeiOffice%20KS-CE%20-%2012%20Aug%202012/IMG_3227.jpg1440×1080 191 KB

15

4 June 2013

Work VS-XX

17x8 +30
17x9 +32

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelssssssss%202/Work%20VS-XX%20-%204%20Jun%202013/IMG_2875_zps903ee3ce.jpg

16

price on the blitz 03s?

17

Just scoll up and you will find all pricing and details…

4 Jun 2013

Work S1

17x8 +40
17x9 +42

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelssssssss%202/Work%20S1%20-%204%20Jun%202013/IMG_2950_zps413a8977.jpg

18

GREAT DEAL! if only those equips were just a bit bigger!

19

5 Jun 2013

ADVAN RG1

18x9.5 +35

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelssssssss%202/Advan%20RG%20-%205%20Jun%202013/IMG_2841_zpse3538b9f.jpg

20

27 Jun 2013

Work S1 3 Pieces

18x9 +43
18x10 +43

http://i89.photobucket.com/albums/k217/Rexchris66/JDM%20Wheelssssssss%202/Work%20S1%203%20Pieces%20-%2027%20Jun%202013/IMG_3560_zps0e7b1d04.jpg