FS: B18c1 JDM GSR engine

Classifieds
1

This is a JDM GSR motor, if someone wants to buy it in the next 2 weeks I will sell it, otherwise I’m going to put it in my civic. It was in my 95 integra, and ran great. the car was wrecked and the timing belt broke, so I took the head off to make sure everything was ok. I just put $650 in parts into the tranny, it has a LSD. The motor is apart right now, but i can have it together in a day. This motor will come with a chipped p28 ecu and I can include 2 beat axles that can be used for cores if you need them. I will put a new honda head gasket, oil pan, oil pan gasket,plastic timing belt covers, valve cover gaskets, and vtec soleniod gasket, and intake manifold gasket. I cleand all the valves and head and put everything back together. I want to get $2500 for it. If anyone wants to pay for parts for a rebuild with performance parts, I would be willing build it at no charge, but you would need to buy all the parts upfront.

http://img.photobucket.com/albums/v662/padaurizio/parts010.jpg

http://img.photobucket.com/albums/v662/padaurizio/parts009.jpg

http://img.photobucket.com/albums/v662/padaurizio/parts008.jpg

http://img.photobucket.com/albums/v662/padaurizio/parts007.jpg

2

can anyone vouch for this guy?

do you have any friends on the board or anything

lmk

3

1500 cash for all the pices not put together as it sits right now

4

hey thorpe, u still doin that front end ? :wink:

5

fuck no … it’s only a honda man not a show car

6

I can vouch, he bought my shell :tup:

7

4 cyl blocks are goofy…
free bump - glws

8

goofy in sense that they r not v shaped or that they have 4 cyls? LOL

anyways GLWS 1500 as it sits=good deal

9

i don’t really know many names on this board, i mostly do stuff on UBRF, there are a few people who can vouch for me over there, partschic, twizted, boosted88gt, stmotorsports, 99_civic_si, toda party

my name on UBRF is bighippo22

10

No thanks…
$2200 can buy it as it sits

11

don’t forget you need new head studs for it and probly rod bolts … and several other things … my offer for 1500 will stand untill the end of the week … then it’s down to 1300 i’m not trying to be a dick or low ball … just offering what i think it’s all worth … good luck with the sale man …

12

if he is bighippo22 than i will vouch for him, i picked up an sr20de form the bighippo22

13

he is bighippo and i can vouch for him

14

doesnt sound like a bad deal as long as all the valves are replaced. Theres no way in hell the belt broke without taking out at least 2cyl’s worth of valves. The new valves also need to be lapped into place and vacuum checked to make sure they seal correctly but Im sure everyone already knows this. The bottom end is Probably fine as long as a valve never dropped or broke.

15

why does it need rod bolts though? the dealer told me that the head bolts are not tty, so why do those need to be replaced?

16

yeah I don’t think its gonna need rod bolts, the head bolts could also be in spec, hard to tell in the pick tho…drrrrrrrrrrrrr

17

it is suggested that they are replaced. they dont HAVE to be, but you dont have to change your oil either, or your underware for that matter.

18

:word: i never change my underware.

19

doesnt sound like a bad deal as long as all the valves are replaced. Theres no way in hell the belt broke without taking out at least 2cyl’s worth of valves. The new valves also need to be lapped into place and vacuum checked to make sure they seal correctly but Im sure everyone already knows this. The bottom end is Probably fine as long as a valve never dropped or broke.

one of my idiot friends fried a timing belt on his shitty older integra while he was driving, had the belt replaced, car runs fine

20

transmission is sold, I will be parting the rest of the engine