Well im trying to clear up some room in the shed, and i found my old BMX. The bike frame is about 5 years old but everything else is BRAND NEW althought they have been installed for about a year now on the bike. I bought this bike a little over 5 years ago, sold it to a friend because i figured since i got a car now, id probably never ride again. But 3 years after i sold it, i wanted it back cause i missed riding, so i decided to rebuild and change everything on it with new parts. I bought it back from my freind, and he never rode it either, it stayed in his basement the entire time after i sold it to him.
So last summer(2005), i bought all the new parts, installed and waited for free time to ride, but that never happened, so its been in my shed for a while now, just sitting again.
new parts(all brand new, not even a scratch on anything with the orignal price paid):
-Bulldog 3pc. crank set made of 4130 chromoly, finished in crhome with sealed bearings. I dont remember, but i think the crank arms are 175mm long. - 360$
-Sun Rims BFR(big fat rim) triple wall 6016 alloy rims finished in black with 48spoke in chrome(front and back) Super wide, light weight - 280$
-Shomano 48spoke hubs with half inch 13mm axles- 50$
-Kenda K-Rad tires 2.125 wide -40$
-Shimano triple thick, puncture, pinch proof 20" inner tubes -25$
-Free fall light weight flywheel - 40$
-Super thick motocross styled chromoly chain in chrome and black - 30$
-Wellgo metal platform peddles with removable studs in black - 45$
-shimano free wheel - 12$
-Odysey grips -20$
-odysey metal bar ends -20$
-2pc handle bars - 40$
-Jaguar brake pads - 10$
-Tekno V brakes and brake handle made from alloy (rear only, no front brake)- 50$
-Ahead set, headset - 35$
-Dianmond Back stem - 45$
-Diamond Back saddle - 25$
I think that was all that was new, pretty much everything was replaced except the frame and forks and saddle.
As you can see, i spent a lot of money on it. I just want to get rid of it, who am i kidding, im never going to ride again. I just dont have the time, which sucks.
Im asking 275$ obo. I might be open to parting it out but id rather sell it as a whole. I have a bunch of other spare parts too and a lot of other new parts too. If you need anything let me know.
Frame is in mint condition. It s a dirt/race bike. Never did street riding with it. Everything else is perfect. It weights less than 30lbs. in total, its really light for jumping and racing.
pm me if you have questions or need more specs,
I also have a brand new Alex rims, its an alex supra a-pro rim, tripple wall, 20", made of 6061H steel-alloy finished in chrome. Its a 48 spoke rim. Never used, still wrapped in plastic it came in.
35$ OBO
I have this Rossi Circuit snowboard. Brand New, i never rode it. It waxed and ready to ride. not a single scratch or nick, or nothing on this board! i got it when my sims started to delame, but sims replaced my board with a new one underwarranty faster than i could even have a chance to ride this one. its 150cm, full wood core, semi stiff (good learning board for freeride or park, with lots of pop and medium flex, so its not too soft or too stiff), Stainless steel edge, laser cut design with “sandwhich” construction. trialxial top sheet (3 layers of firberglass) and over 90 layers in total is used to make this board, its the rossi signature, thats why they are so bullet proof! ABS sidewall, sintered base, progressive side cut.
225$ OBO for the board.
I also have brand new RIde LS bindings in LARGE size, they are silver colored.
here are some specs i got off some site:
*Anatomical 6061-T6 Aluminum Shaped Base with Adjustable Heelcup - Ride’s 6061-T6 Aluminum Shaped System offers a clean low-profile base with all-purpose mid-flex in all directions for the Rider who wants time-tested, all-mountain comfort, control, versatility and durability.
*Molded EVA Toe and Heel Shock Pads - provides comfortable, “grippy” shock absorption.
*Molded EVA Toe Ramp - for extra toe-edge response
*Multi-Compatible, Forged Aluminum Response Disc - Now 20% lighter! Constructed with forged aluminum for strength, Ride’s Multi-Compatible 2-Slot Disc Design mounts on 4-hole and 3-hole patterns for total freedom of choice: Align slots tip-tail for 4-hole and toe-heel for 3-hole. Grip-tooth washers provide bomber locking-power.
*Highback Features
Doubleback - fits more comfortably to your leg and provides added control
*Tool-Less Forward Lean Adjust - for convenient alterations
*Strap Feature:
Standard Ankle and Toe Straps - Enhanced EVA Contouring provides comfortable, flexible shaping, and length adjustment makes centering a cinch
*Single Density EVA Ankle Pad - Adds bio-mechanically designed performance flex characteristics
*Ratchet Features
Aluminum Anatomical Grip-Pod Ratchet - Ride’s tried and true ratchet design features an anatomical lift-release lever with Grip-Pods for comfortable, fast and easy cranking and release.
Like i said, brand new, i got them when i got the board. I still have the box if you want it.
150$ OBO for the bindings
or 325$ for the board and the bindings - saving 50$!.