i have two pairs of spacers, one is 5 lug, 10mm BINGS but is not the universal 4/5 lug that i make now, this was a pre-prodcution version that i’ve had sitting around. perfectly hub centric for nissan… 6061 aluminum, anodized… made in Canada
$55 shipped.
second i have a universal pair of blue anodized aluminum 4 lug spacers… they are from a Touge Factory set that i had 3-4 years ago… they are 5mm… they will fit 4 x 100, 4 x 114.3 and another 4 lug pattern i havent measured.
$40 shipped
–
I just replaced the clutch in my SR and have some other SR parts left over.
The clutch is a rebuilt SPEC stage 3. I had Eurodrive rebuild it 2-3 years ago and just 2 weeks ago on the track it slipped a couple times at the top of 3rd.
My car was last dyno’d at 325whp, so for a lesser power SR it should hold fine. Also a good candidate for another rebuild. It is a 6 puck sprung clutch.
i can have pics up later, im at work now, so maybe tomorrow.
$100 for the clutch disk and pressure plate. SPEC or OEM (OEM one is usable)
SR starter
Starter of the engine set i picked up. For some reason it stayed engaged when the motor was running so we put the one from my old engine on. This could be an easy fix or good candidate for rebuilt.
$40
Stock SR20 manifold
$50
S13 SR coldpipes
from kits i seperated for guys…
scrap your janky coldpipes for these.
1 left
$60 ea.
Non-Hicas Subframe with Open Diff…
missing an LCA and i need an axle off it too for my own car.
$150, no pics
Brembo Blanks /// 4 lug
$180 obo… all 4 corners
–
350z Wheels 18 x 8 +30
$450
rashed up a bit, more details here:
http://www.son240sx.org/forums/showthread.php?t=40086
–
TIRES TIRES TIRES
go here:
http://www.son240sx.org/forums/showthread.php?t=41381
OTHER
2.75 - 3" transitions… $15 each, i have like 8-10 for some reason.
Stock Coupe tailights… $30
SOLD:
SR20 63 ECU
USed Bings Lip
Aluminum Rad
Vogtland Springs
Z32 rotors
Ricer Tails
Coupe trunk
V-band clamps
SR harness
1 coldpipe