Greddy VSPL - S13 Koyo - Kouki Fogs - 5 lug + more

gents, looking to clear out some space in my garage so i can fit a car back in there :slight_smile:

I also have these S14 Kouki fog lights… i bought a bunch of them to make them work then took them off the car… i have 2 rights and 1 left.

$60 each…

http://www.bings.ca/images/parts/kouki%20fogs.JPG

This is a blown out CF mufflered s13 axleback… could be used for the piping and the tip i guess…

$40 or i take it to the scrappers with some other stuff

http://www.bings.ca/images/parts/busted%20cf%20exhaust.JPG

These are some mis-machined 20mm wheel spacers… they are missing a hole for the 4 lug pattern and the hub centric lip is also not on them… they are still hub centric for Nissan centre bore.

i have a few pairs of these left. they are suitable for 5 lug rear spacers only imho. Solid billet, Canadian made.

$45 per pair

http://www.bings.ca/images/parts/janky%20spacers.JPG

Autometer and Defi Stepmaster bost gauges… the Defi needs a link meter, i just don’t need it since i have the truboost too

$50 for autometer, $80 for defi

http://www.bings.ca/images/parts/boost%20gauges.JPG

Greddy bov flanges… one on pipe is sold…

$25 each

http://www.bings.ca/images/parts/greddy%20flanges.JPG

3 G35 / 350z wheel hub & bearings… no studs, i had ARP studs and pressed them into my new hubs… turns out it was an alignment issue not a hub / bearing issue… other than the one not pictured here. i’m not sure which are fronts and which are rears at this point

$100 for all 3.

http://www.bings.ca/images/parts/G35%20Wheel%20Hubs.JPG

FULL 5 LUG Conversion, front and rear.

front is redrilled OEM hubs with ARP studs

rear are conversion hubs.

$200 for all… still on the spindles, no pics.


BTW, i woudl trade anything towards a decent set of wheels / tires that i can put on my S14 while i spend some time figuring out how to fit my CCW’s.

Ahhhh. Wish you had posted the flanges a week ago. Still pretty interested in the one welded into the pipe.

edit: actually, interested in the AVC-R too. Is shipping a possibility?

yeah i can ship without any issue…

i’ll throw in the greddy flange thingy for free with the AVCR + $20 for shipping.

Avcr and greddy flange on pipe are sold.


i shouldnt have these parts, i should have someones money already… BUY NAAAOWWW!!!

http://www.asicentral.com/images/blogs/grumpy-no.jpg

Arrived yesterday. Thanks again Bing!

removed some sold stuff… bump

BUMP!

Will any of these parts fit my ka, im turboing my ka, wanted to know if they will fit?
Thnaks

Fmic can work

BUMP!!!

UPDATED… sold some stuff.

this vspl and koyo should have found a new home already.

vspl, koyo, subframe etc. all sold…

What are the rear conversion 5 lug from? I might be interested in the swap

I don’t know but they are near new.