gents, looking to clear out some space in my garage so i can fit a car back in there 
Greddy VSPL with hotpipe with a mounted Greddy Type S bov for s13 SR, coldpipe for greddy / freddy manifold - $450
no elbow coupler to the turbo… i had one but it’s not really worth reusing.
.JPG)
Koyo Aluminum rad +black Samco hoses (lower hose cut for inline water temp) - $200
.JPG)
S14 Circuit Sport resonated exhaust. I bought this for my S14 a few years ago because i wanted a nice stealthy 3" catback. the quality is far better than typical chinese stuff… it’s still in excellent shape. This exhaust is discontinued and there really are no quiet catbacks that also look stock-ish like this.
It sits nice and high… perfect sleeper or DD exhaust.
$300
.JPG)
mounted:
.jpg)
I also have these S14 Kouki fog lights… i bought a bunch of them to make them work then took them off the car… i have 2 rights and 1 left.
$60 each…
This is a blown out CF mufflered s13 axleback… could be used for the piping and the tip i guess…
$40 or i take it to the scrappers with some other stuff
These are some mis-machined 20mm wheel spacers… they are missing a hole for the 4 lug pattern and the hub centric lip is also not on them… they are still hub centric for Nissan centre bore.
i have a few pairs of these left. they are suitable for 5 lug rear spacers only imho. Solid billet, Canadian made.
$45 per pair
Autometer and Defi Stepmaster bost gauges… the Defi needs a link meter, i just don’t need it since i have the truboost too
$50 for autometer, $80 for defi
Greddy bov flanges… one on pipe is sold…
$25 each
3 G35 / 350z wheel hub & bearings… no studs, i had ARP studs and pressed them into my new hubs… turns out it was an alignment issue not a hub / bearing issue… other than the one not pictured here. i’m not sure which are fronts and which are rears at this point
$100 for all 3.
I also have this 350z subframe that i was going to use like my s13 one to make multi-link for but i dont really have the time to do that anymore… nor the interest.
$50 for it and i expect to have access to it if you don’t install it maybe someone else wants to work with me on the multi-link just so that i can get this out of my garage?
FULL 5 LUG Conversion, front and rear.
front is redrilled OEM hubs with ARP studs
rear are conversion hubs.
$200 for all… still on the spindles, no pics.
ISIS BNIB S13 SR20 radiator, aluminum fan and shroud kit and hoses… sold to client, project aborted, i’m reselling it.
$350 for all.
