KA/Misc Items Garage/Basement Clear-out. EVERYTHING MUST GO!

Alright, since i can hardly walk in my garange, and my basement due to the parts and crap, i’ve gotta get rid of some of this stuff.
All Prices are OBO unless otherwise specified, and located in Oak Ridges (northern Richmond Hill), Ontario.

Asking Price: $ 60 (OBO)
Condition: Used
Location: Richmond Hill, Ontario.
Will Ship?: N
Contact Info: Send PM for contact details and to schedule a meet
Description:
Autometer 60mm black-faced Oil Pressure Gauge w/random fitting. It’s the one on the Right in the picture

Asking Price: $ 40 (OBO)
Condition: Used
Location: Richmond Hill, Ontario.
Will Ship?: N
Contact Info: Send PM for contact details and to schedule a meet
Description: Stock KA-E downpipe w/EGR fitting. Works Perfectly, no holes, ect. No use to me anymore since i went SR.

Asking Price: $ 30 (OBO)
Condition: New
Location: Richmond Hill, Ontario.
Will Ship?: N
Contact Info: Send PM for contact details and to schedule a meet
Description: Triple Gauge pod for center vents of S13 (maybe S14 too, not sure) Brushed aluminum finish, perfect condition.

Asking Price: $ 50 (OBO)
Condition: New
Location: Richmond Hill, Ontario.
Will Ship?: N
Contact Info: Send PM for contact details and to schedule a meet
Description: S14 T28 turbo, Seals are blown, and thrust bearing is shot. Good candidate for a rebuild.

Asking Price: $ 30 (OBO)
Condition: New
Location: Richmond Hill, Ontario.
Will Ship?: N
Contact Info: Send PM for contact details and to schedule a meet
Description: Drivers side S13 Tweed seat. Has some bolster wear from getting in and out, not torn, just the tweed fell off lol.

More Stuff I Found…

Asking Price: $ 50 (OBO)
Condition: New
Location: Richmond Hill, Ontario.
Will Ship?: N
Contact Info: Send PM for contact details and to schedule a meet
Description: Bassworx 10" Shallow profile box, Used for less than a month. Looks Brand new. I’m currently using a double 10" setup so i have no use for this. Great for the people who want a little bump in the trunk, but don’t want to sacrifice trunk space.

Asking Price: $ 20 (OBO)
Condition: Used
Location: Richmond Hill, Ontario.
Will Ship?: N
Contact Info: Send PM for contact details and to schedule a meet
Description: OEM S13 Leather steering wheel w/cruise controls. There is some wear around the 10 and 2 positions… other than that mint.

Asking Price: $ 40 (OBO)
Condition: Used
Location: Richmond Hill, Ontario.
Will Ship?: N
Contact Info: Send PM for contact details and to schedule a meet
Description: 32 cm diameter electric fan w/pigtail of some sort. This is the type that pushes into your rad from behind. Kept the SR cool very well.

http://i219.photobucket.com/albums/cc16/danbikes/HPIM0404.jpg

Asking Price: $ 10 (OBO)
Condition: Used
Location: Richmond Hill, Ontario.
Will Ship?: N
Contact Info: Send PM for contact details and to schedule a meet
Description: EGR thingy from KA-E. I no longer have any use for it since going SR. Wroked good before i pulled it. Good for those of you needing to pass E-Test.

Asking Price: $ 35 (OBO)
Condition: Used
Location: Richmond Hill, Ontario.
Will Ship?: N
Contact Info: Send PM for contact details and to schedule a meet
Description: KA-E original intake piping and MAF sensor (no pigtail) Both worked perfectly before being pulled.

Asking Price: $ 15 (OBO)
Condition: Used
Location: Richmond Hill, Ontario.
Will Ship?: N
Contact Info: Send PM for contact details and to schedule a meet
Description:KA-E Charcoal Canister. Worked perfect before being pulled. Good for those of you needing to pass E-Test.

Asking Price: $ 45 (OBO)
Condition: Used
Location: Richmond Hill, Ontario.
Will Ship?: N
Contact Info: Send PM for contact details and to schedule a meet
Description: OEM KA-E Rad. Perfect condition, hardly any bent fins. No leaks, etc. at all.

Asking Price: $ 25 (OBO)
Condition: Used
Location: Richmond Hill, Ontario.
Will Ship?: N
Contact Info: Send PM for contact details and to schedule a meet
Description: OEM KA-E Fanshroud. mint condition, not cracked or broken anywhere. Kept me from overheating.

Asking Price: $ 20 (OBO)
Condition: Used
Location: Richmond Hill, Ontario.
Will Ship?: N
Contact Info: Send PM for contact details and to schedule a meet
Description: OEM KA Clutch fan. I have 2 of these, both in perfect working condition. You will never overheat again with one of these (within reason of course).

Asking Price: $ 20 (OBO)
Condition: Used
Location: Richmond Hill, Ontario.
Will Ship?: N
Contact Info: Send PM for contact details and to schedule a meet
Description: OEM KA-E Ignition Coil. Worked 100% before it was pulled.

Asking Price: $ 25 (OBO)
Condition: Used
Location: Richmond Hill, Ontario.
Will Ship?: N
Contact Info: Send PM for contact details and to schedule a meet
Description: OEM KA-E Fuel pump. worked 100% before it was pulled in favour of a walbro for my SR.

Asking Price: $ 20 (OBO)
Condition: Used
Location: Richmond Hill, Ontario.
Will Ship?: N
Contact Info: Send PM for contact details and to schedule a meet
Description: OEM KA-E ECU #10. Works 100%.

THANKS FOR LOOKING!

Triple Gauge pod SOLD,

Adding:

Asking Price: $ 50 (OBO)
Condition: Like New
Location: Richmond Hill, Ontario.
Will Ship?: Maybe
Contact Info: Send PM for contact details and to schedule a meet
Description: 52mm Stewart Warner Silver faced Boost/Vac gauge, goes up to 40PSI boost, and -30 in/Hg vacuum. Comes with vacuum line fitting, bracket, and backlight if i can find it. My boost controller has an integrated boost gauge so i have no use for this. I bought it, used it for about a week, then i got my DBC.

http://i219.photobucket.com/albums/cc16/danbikes/HPIM0431.jpg

Would you sell just the gauge, without all the wiring and such?

Possibly, i might have someone buying everything ATM, but if they don’t i will definately consider it.

Boost Gauge SOLD!!! thanks Veloz.

PS, if you were wondering why i looked out of it, i’m running on very little sleep lol

LOL

No worries…

Thanks

ill take the turbo. give me a phone number.

T28 is SOLD! Thanks Shaun (SP?) lol.
OEM Steering wheel and KA Rad SOLD as well, Thanks Sebastian.
Bump.
Will be adding a few items later today when i get home as well.

A few more things you might be interested in:

Asking Price: $ 140
Condition: Used
Location: Richmond Hill, Ontario.
Will Ship?: Maybe
Contact Info: Send PM for contact details and to schedule a meet
Description: Greddy Type RS Blow off valve. Works great, chicks love the sound. Selling in favour of a Synchronic BOV that i got a great deal on.
DOES NOT COME WITH FLANGE/COLDPIPE. BOV ONLY.

Asking Price: $ 100 (OBO)
Condition: Used
Location: Richmond Hill, Ontario.
Will Ship?: No
Contact Info: Send PM for contact details and to schedule a meet
Description: Used SR Trust/Greddy 3" flex downpipe with wideband flange. This came with my SR package, but at the time, i had already bought a brand new one, so i used that one instead. Theres a little bit of the mesh fraying at the bottom from the previous owner scraping it a bit, but i can 100% Guarantee you it doesnt leak at all. I was in the car before it was taken out and there weren’t any exhaust leaks. Also just a bit dirty.

EDIT: Sorry for the crappy pic of the BOV, i couldn’t get it to focus properly, but if anyone is questioning the BOV’s authenticity, i still have it in my car, so feel free to come see/hear it yourself.

bump

still got that seat

BUMP from the dead. still have most of this stuff, prices are more or less flexible. Send me some offers i need to get this stuff GONE!

@ BRA_GANZA: yes i still have the seat.

hey man, hope your clear out is going well.
my ignition coil is fucked on my 95 senki 240
do you still have your ignition coil for sale? is it integral with the distributor shaft?
let me know

regards,
Babak

Yes, i still have my old Ignition coil, and no it’s not integrated with the dizzy.

Let me know.

Bump from the dead…

whts the lowest you will take for the bov?

you still have the drivers seat?

Hey danbikes, not to shit on your thread but got my pm about the drumset?