This is KoukiS14 here. Using my brothers account since he will be handling all the transactions for me. Im not around to deal with this stuff myself.
All parts are located in Windsor. My brother doesnt come to Toronto often but PM him and you can try to work something out on the smaller parts. Will not deliver any of the bigger parts, sorry. For some of the prices the trip may be worth it.
NO Lowballers.
TEIN EDFC controller - USED and works fine. NOTE: Cut the wires on the plug ends to fit them through the firewall. Simple solder or splice job needs to
be done. MUCH easier than cutting a large hole in the firewall to fit them through. Otherwise everything else is there. You will need to ensure that you
have EDFC compatible TEIN coliovers for this. 175.00
JDM Silvia front grill - 80.00
USDM Zenki Front lip painted red - 75.00
USDM Zenki front bumper, great shape - 50.00
USDM Zenki rear bumper, some scratches - 50.00
Seibon OEM CF hood for Kouki, has minor blemish - 475.00
Tekniq Steering wheel, no hub, 320mm if Im not mistaken - 75.00
HID kit for Zenki, 6K - 100.00
Zenki headlights and cornerlights, cleaned so no yellowing - 100.00
Both for 175.00
Front Zenki rebar and stay - 50.00?
Origin universal side under canards 175.00
JDM Kouki rad support + accessories - 75.00
S14 Seats - Great condition but theres a catch. Had to use the brackets off the back for R32 seats so they are missing a bracket. 50.00
Universal velocity stack with filter - 50.00
Heres the deal with these clutches, both for SR. Fidanza clutch sent me the clutch setup in the second picture. Unfortunately it didnt hold on a basically stock SR. So to remedy the problem they sent me their stage 3(which is a ZOOM brand) rated to 300hp. However, it was too late as I installed an
exedy by that time.
The culprit isnt the clutch material rather the shitty ass pressure plate. If you were to use a stock SR pressure plate or upgraded one with either
clutch then it would hold.
4 puck, BRAND new - 50.00
carbon, kevlar, less than 1K on it. You get everything in the picture - 50.00
S14 KA rad and accessories. In great shape - 75.00
S14 airbag - 50.00
S14 KA distributor and wires - 50.00
B-Series Honda valvecover - 50.00
OBDI B18B ECU(I think) - 50.00
S14 Manual KA ECU - 50.00
S14 Auto ECU, no speed limiter - 50.00
JDM steering column and dash support - 50.00
Sun Auto Pedals - 50.00
KA Engine mounts NOT nismo, stock but in great shape - 40.00
STRI 52MM SLM, white LED tinted glass gauges. USED, boost Fuel and Oil pressure - 200.00
ARP long studs for WRX - 100.00
EVO 8-9 SS brake lines - 75.00
<
5Zigen catch can - 50.00
JDM Prelude Type S Cluster, yellow needles, 2XX KM
JDM Nismo shift boot - wont work on USDM - 40.00
JDM S14 door handles, white, no key - 40.00
Eagle Talon 4G63 AMS spark plug cover painted black - 40.00
Red Zenki hood, small dent on the nissan logo, otherwise clean - 40.00
Tein s-tech springs on Gr2 fronts and stock rears, aprox 1.5inch drop - 100.00
JDM stock SR downpipe and cat - ideal for passing etest! - 100.00
Estilo 16-inch rims with 205/55/16 Signet winter tires. 150.00
Pair of Nitto 245/45/17 drag radials - 150.00
ONE falken Hanabi rim 17x9 +20 NEW - 50.00
