Upgrading the switch in the rack from a Nortel Baystack to a Cisco 2924 Switch.
I expect no problems
Rollback plan: Hook old switch backup
Total outage time should be 5 minutes at the most.
Thanks for your patience and continued support.
Your truely,
Bobby
what does that mean? faster porn>
faster responses to piss off bobby :boink
im not bobby ? 
well poo
woohoo… thanks bob
wahoo for upgrades!
im still here :naughty:
then it musn’t be upgraded yet
switch was swapped at approx 11 oclock
checking for any errors now
but shelby posted at 12:04. theres an error. Debug that shit!
FastEthernet0/X is up, line protocol is up
Hardware is Fast Ethernet, address is xxxxxxxxxxxxxxxxxxxxxxxxxxxx)
Description: pittspeed.com .X
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not set
Full-duplex, 100Mb/s, 100BaseTX/FX
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output 00:00:01, output hang never
Last clearing of “show interface” counters never
Queueing strategy: fifo
Output queue 0/40, 0 drops; input queue 0/75, 0 drops
5 minute input rate 544000 bits/sec, 45 packets/sec
5 minute output rate 44000 bits/sec, 29 packets/sec
261933 packets input, 329134789 bytes
Received 177 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast
0 input packets with dribble condition detected
174601 packets output, 26694507 bytes, 0 underruns
0 output errors, 0 collisions, 3 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out