Polished Weiand 142 supercharger (blower) for SBC **LIKE NEW!**

Classifieds
1

These Weiand 142 Pro Street Supercharger Kits are engineered to give you a 25-40 percent gain in power–while maintaining outstanding streetability. These blowers feature all new parts, including new thick-wall cases and rotors to eliminate high-rpm flex. Each 142 Pro Street Supercharger is 100 percent boost tested to ensure you can squeeze out the maximum power and efficiency they offer.

Brand: Weiand
Manufacturer’s Part Number: 6510-1
Part Type: Superchargers, Roots Style Kits
Product Line: Weiand 142 Pro Street Superchargers
Summit Racing Part Number WND-6510-1

This is one of the nicest used weiand mini blowers you will find. It was actually replaced under warranty so it has less than 5,000 miles on it! Comes with everything that was included when I purchased it new from summit ($2499). These kits do not come with intake manifold bolts or coolant fittings for heater cores, you must supply them.

**Also being offered for an additional $500 is Holleys blower specific boost referenced carburetor, dual feed fuel line w/ psi gauge, the lager 7" lower pulley and belts, and 2 additional upper pulley for even more boost. The carb alone sells for $500.

-These Carburetors are intended for use with 140 series superchargers, and have a unique capability that allows their power Valves to reference the intake Manifold vacuum below the supercharger. This allows the power valve to operate as it should, based off intake Manifold vacuum. A power valve provides further enrichment to the main metering system under load (low vacuum) conditions. Without this external referencing, the power valve would be “reading” the Supercharger boost pressure, which has no bearing on the engine load. Specifically Designed for Use on Roots Style Blown Engines; Model 4150; Shiny Finish; Manual Choke; Mechanical Secondary Double Pumper

Features
•Model 4150 HP design
•Chevrolet small block 1x4 140 series supercharger
•Shiny finish
•50cc secondary pump
•Manual choke
•Mechanical secondary
•Boost referenced power valve

$1500 for just the blower kit or $2000 for everything. All parts together are valued over $3500!!

Check out my dyno run to see and hear this blower in action.

Please message or call Nick (716) 574-1783, leave message if no answer.

http://i54.photobucket.com/albums/g110/becuz34/weiand%20142/th_142kit.jpg

http://i54.photobucket.com/albums/g110/becuz34/weiand%20142/th_kit_boxed.jpg

http://i54.photobucket.com/albums/g110/becuz34/weiand%20142/th_carb_extras.jpg

http://i54.photobucket.com/albums/g110/becuz34/weiand%20142/th_12.jpg

2

miles? why was it removed? engine ever get hot? checked by a machine shop to make sure its still true?

3

Less than 5,000 miles, was replaced a couple years ago under warranty for a seal and bearing issue. I switched to a procharger and no longer have a use for it. I run an aluminum radiator and the motor stays under 200 deg. It has not been checked by a shop.

4

damn. if only this was last year. i would have built my motor alot different to use this. instead im waiting to build the next motor with a 6-71, but ill have to change out everything as i have way too much compression for that.

these are great blowers for the street you can typically run more boost on one of these then a 6-71 and still be very streetable. just make sure you get the right cam and a good set of heads.

glws.

5

Same blower just sold on ebay for $1200 but it was used-used and someone didnt keep up with the polish so they rattle canned it black. This one I’m selling shines like new still.

6

SOLD, Thanks for looking.