** Please fill in all the fields before creating the thread **
Asking Price: $ Varies or take it all for 400$ Also interested in trades listed below. Condition: Used Location: Mississauga Will Ship?: No Contact Info: Send PM for contact details and to schedule a meet Description:
Yeh I bought this motor planning to build it but im going to go gangter RB26 instead so this if for sale.
You can take entire motor for 400$ or it is being parted out.
For anyone taking motor as a whole you should know that everything for each section of the motor has been placed in seperate labeled ziploc bags and stuff like cam caps have been labeled position in head and are in seperate bags each.
S14 SR Fuel Rail with Injectors - 80$
S14 SR Intake Manifold - 70$
S14 SR Head with no cams(Cam caps taken out but are in seperate bags all labeled and will be Included with sale of head) - 250$
S14 SR Cams in excellect condition no scarring/scratches on them - 80$
Cams can be included with head for 300$
S14 SR Block with part of piston melted to wall(Tiny) 100$
S14 SR Pistons #3 has small portion missing that is melted to cylinder wall - 50$
S14 SR Blacktop Valve Cover - 100$
S14 SR Powersteering Bracket - 40$
S14 SR Oilpan in good condition - 50$
S14 SR Crank - 150$
S14 SR Waterpump - I beleive Varun told me it was new or newer or somthing cant remember if he see’s this and can verify.
S14 SR anything else you might need off of it. There wernt many sensers on it,No flywheel,No Exhaust Manifold.
Also for sale is a 99% Brand new HKS SSQV in silver - 210$
For trades im interested in an Electronic Boost controller/Uras front bumper/winter beater/Sideskirts/Coupe Valance or Rear bumper/Z32 Brakes/Tbolt Clamps/Nice 205-215/40/17 Tires(new)/anything else you may got that I find interesting.
I’m just rebuilding my SR motor now. Original motor was purchased with melted block due to overboost
Heres a breakdown of the costs so far. I am doing rebuild work myself
Replacement block - $100
Hone cylinders and crank journals, Rework pistons (crosshatch) to fit new bore diameter and machine block top surface- $300
Total seal rings - $260
Bearings - $100
Resize rod big ends - $50
Machine head flat top and Bottom & replace exhaust guides - $500
Bronze Guides - $180
Lash pads - $50 ( had to buy 4 of them to correct rockaer arm geometry)
Head gasket - $180
Gaskets - About $20 so far
I havent included costs for perfomance upgraded parts. ( there are a few) because thats up to the individual.
Just wanted to help show general costs for my rebuild. I wanted to make sure the bores were good, the crank and rod journels were sized correctly, and the head and block were flat
Wondering if this engine is still up for grabs? would i need to replace the cylinders or can i just put over sized pistons in it? what else is included? is the bottom end taken apart also? motor mounts? brackets missing? what sensors missing? anything you can name would be helpful.