nope
what is it then?
ya. someone explain this cause i thought the first number (ex: 295) was the width, the second (ex: 40) height/profile, and the last (ex: 17) rim???
exactly what I thought
from the tire rack
Section Width
Following the letter(s) that identify the type of vehicle and/or type of service for which the tire was designed, the three-digit numeric portion identifies the tire’s “Section Width” (cross section) in millimeters.
P225/50R16 91S
The 225 indicates this tire is 225 millimeters across from the widest point of its outer sidewall to the widest point of its inner sidewall when mounted and measured on a specified width wheel. This measurement is also referred to as the tire’s section width. Because many people think of measurements in inches, the 225mm can be converted to inches by dividing the section width in millimeters by 25.4 (the number of millimeters per inch).
225mm ÷ 25.4 = 8.86"
Sidewall Aspect Ratio
Typically following the three digits identifying the tire’s Section Width in millimeters is a two-digit number that identifies the tire’s profile or aspect ratio.
P225/50R16 91S
The 50 indicates that this tire size’s sidewall height (from rim to tread) is 50% of its section width. The measurement is the tire’s section height, and also referred to as the tire’s series, profile or aspect ratio. The higher the number, the taller the sidewall; the lower the number, the lower the sidewall. We know that this tire size’s section width is 225mm and that its section height is 50% of 225mm. By converting the 225mm to inches (225 ÷ 25.4 = 8.86") and multiplying it by 50% (.50) we confirm that this tire size results in a tire section height of 4.43". If this tire were a P225/70R16 size, our calculation would confirm that the size would result in a section height of 6.20", approximately a 1.8-inch taller sidewall.
http://www.tirerack.com/tires/tiretech/techpage.jsp?techid=46¤tpage=33
Ok so what is the widest you can go on a 9 inch wheel? I thought 295 was the max. Anyone know…blue…ask jeeves?
yep
you can fit a 315… but itll buldge… I wouldnt go bigger than a 285
I run 315 drag radials on mine they a little tight on clearance, getting 275 next time
http://home.earthlink.net/~law086/TA/
more pics of the TA im pickin up saturday
looks awesome. factory hurst = win, mine has it too. black is best color !!! cant wait to see it.
you do know that taking pictures requires light right?
there was a previous batch of pics that were takin during the day but i thought i already posted them. and i just asked for pics of the interior so what the fuck you need light for.
the only bad thing u have goin is wider-spoke 01-02 wheels > than normal ws6 wheels 
ehh fuck it, ill buy z06s
just messin w/ u…i do like the wider-spoke better, but its all opinion. Z06 is decent on WS6s, i like them on SS’s more though.
mine 3!!!
hurst
black
leather
pimp
i got two of the same thing here!(:overatedformulas>t/a’s)
hell yes!!
pewter, 2 of the same what?
02 black ws6 6spds