$3 ea. but the heim is .75 wide inside the hole, and those are only 3/16" deep each, so it would only have .375 worth of material inside the bore for the heim bolt. not ideal but I dont see it being a major problem.
you sure the panhard isnt 7/16? becasue thats a common heim bolt hole size. I cant find 9/16 anywhere.
and I would assume the LCA’s are a larger bolt than the panhard since the load on a controll arm pushing the car would need to be stronger than a pan hard just centering the rear end in the car.
Nah using high misalignment spacers you need to get a larger dia heim bore so the HMA can be stepped down from a larger outside dia to the correct bolt size. Also he doesnt need high misalignment joints, and the ones I specd out and use on all my 4 link kits and what not are 20deg 15Klb or 23Klb (.5 or .625 bolts) load rated. You would sheer a bolt before these let go.
and they are mounted horizontally under the car so they have 360 deg travel really.
Are those X-Series rock ends!? all rebuildable goodness and belong on a monstertruck! YESSS
all said and done. Speedway motors has the heims cheaper, but they dont have the tube adapters. i did the math and it was a $0.32 difference if both places charge me $17 for shipping (QA1 did last time shipping only tube adapters to me, fuckers) so its not worth dealing with 2 places.
sounds good man. Order everything up and I will settle up with you next friday afternoon when I come to pick them up (if you can have them done by then)
fucking QA1 has the worst ordering system online ever. The last order prior to yours they apparently wanted to confirm the shipping costs with me and didn’t call for 3 days, until I called asking wtf is going on.
So I check my account today and dont see any deduction for the parts, I call and see what the hell is going on and they dont even have an order. the fucking online form must have screwed up.
I am re-ordering them now… on the phone. So friday is a long shit for them to come in by. I will keep you posted.