I have a customer with a set of two piece OZ Superleggaras i have to take apart to coat. Does anyone have the bolt tool I can borrow, or point me in a direction to buy one locally or online? I heard a serrated wrench or whatever its called from NAPA will do it but i have no clue what that is.
thanks!
Mike
I believe I have you setup. Will advise.
Serrated wrenches are typically 12 pt.
werd, def 10 pts. thats why ya dont allways listen to people on the wheel-whore pages. lol so serrated is the tripple squares i have then or whatever. thx
Ugh. You are nearly fucked.
I have the OZ socket tool 10pt 8mm.
You need the male version…which sells for $150 when you can find one.
If you find one…ill buy it and you can borrow.
I’ve taken these apart with triple squares before…but I replaced all hardware with updated 12pt parts.
ohmyballs. this poor dude, these wheels are more and more involved than he thought. LOL
keep me posted like you said we can work something out.
Hey if you find the dirtbag that stole ~25K worth of porsche tools and factory manuals from me years ago, there’s two or three of those sockets in varying lengths in the set. You could have them at that rate as long as I get my bosch hammer back :shifty
I’ve pulled them out with five point security bits before but it usually mars the fasteners
Don’t you have a mill 
I’m gonna try casting one this weekend out of aluminum and then hardening.
NO clue if its gonna work. Something to do while I’m waiting for the tool to show up.
if i had a mill I would never see the light of day, other than replenishing my materials sock and picking up tooling from the mail man as it was delivered! lol
One can cut one from tool steel on a mill with an indexing table, or maybe broach it with the right cutter. 
Hell even filing it by hand out of 6061 bar might work, those bolts are not in there that hard(at least from the factory they’re not) If someone rebuilt and put them in at german torque spec then fowgetabootit :lol
Did you order one from that site? cost? I used to have a triple tool set that had three sockets, with the male one having three different inserts of varying lengths.
http://www.metalnerd.com/cat05.htm
or do a google search for 10 spline key.
awesome post pics of your mold
neg all 12 points, we need a 10 pt 8MM
lots of bad ass tools though! Like the long wobbly allen head for the 1.8T oil pans, way better than fitting 1/4" universals in that tiny ass hole! and I like the hing tool, much better than the cut down tripple square and ratcheting box wrench!
thanks for the link!
BAM right here: http://www.lasertools.co.uk/item.aspx?cat=0&item=10907
Shopping cart has been down since Wednesday. I’ve been calling non-stop. I’m not quitting until I get through.
I’ve been speaking with a dude at Pertsch & Partner in Germany. He is trying to sell me the full OZ/BBS set…Come hell or high water, I’m ordering something today.
fuck wrong link
http://www.titanium-touch.de/shop/product_info.php?info=p557_Special-tool-for-10point-screw.html
they have a single bit i just posted 55euro plus %19 tax included holy shit
Tool set ordered from Pertsch & Partner.
Factory OZ set.
Fake Tools Can Fuck Off
