Can you spot the EPIC FAIL?

[bennyfizzle]

@w.tungsten

no they’re just dumb. your wheels were designed for 5x114.3 not 4x100, so they just didn’t leave much clearance. I got that same shit, i have to use a slim socket.

Nah, my problem was they rounded DOWN on our hub size when we ordered.

E36 M3 hub diameter/what was ordered: 72.56mm

Hub diameter of most any aftermarket wheels for E36 M3: 72.6mm

What they sent me: 72.5mm

I was referencing other wheels, for example:

@paintpro21"

:rofl no kidding. I have a very personal issue with them now. A year ago I worked with them to produce a 15x8" e30 m3 wheel. They took their 4 lug slipstream and drilled tuner fitment lugs into the wheel, even after I gave them all the specs. SO… instead of using an oem lug bolt with a socket to install them, you had to use a lug that needs a 14mm allen socket :shifty, and the holes were drilled near the edge or the metal, and if you could see through the wheel you’d see that there was 1-2mm of material on the side edge of the hub. They were clearly not retested for strength in this fitment. Only their original high offset 4 lug wheel was tested. Shady work. Even better… They told me they would send the shipment back and melt them down…maybe 6 months later a customer points out that they are on ebay. I’m done with them and any company with similar practices.

From there I made finding a high quality manufacturer who tests and certifies every minor change, priority #1.

check out these Rota beauties: