FS.. 99 yamaha R6 pics up!

Bikes in good shape… need to get rid of it to buy a car. kinda make an off. frame was rewelded. was down once (not by me) all plastics were replaced. theres minimal rash on them. theres a bit of rash on the right side cover. new tires. abour 8500 miles. bike is straight as can be… lol you can even take your hands off the bars at 120 lol… ill try to get some pics up. let me know if your intrested. im asking 3250 obo but im flexible. its red and white. bone stock (also a slight jump in 2nd gear… common on r6’s and r1’s)

http://i96.photobucket.com/albums/l172/AKasprzyk/CIMG0536.jpg
http://i96.photobucket.com/albums/l172/AKasprzyk/CIMG0534.jpg
http://i96.photobucket.com/albums/l172/AKasprzyk/CIMG0533.jpg
http://i96.photobucket.com/albums/l172/AKasprzyk/CIMG0532.jpg
http://i96.photobucket.com/albums/l172/AKasprzyk/CIMG0531.jpg
http://i96.photobucket.com/albums/l172/AKasprzyk/CIMG0530.jpg

what do you mean by slight jump

pics, and how bad was it down? Clean title?

it jumps… almost like a tooth ismissing on a gear… when you hop on it in 2nd… it still goes but it dont pop out of gear or anything i guess you need to drive it… it is a common problem on early yzf’s let me know if you got any other questions

i will try to get pics up… wasnt down bad. recently had a tune up. bike runs like a champ… if your in south cheektowaga area your welcome to stop by… just pm me… title is clean

ha i think i have the same problem with my r1 hows the chain on it too loose? could be tranny issues

the tranny is a common problem, there’s not really an easy fix. if you pre-load the shifter by lifting your foot to put pressure on the shifter before you go from 1-2 it’s not as bad. how are the carbs, does it idle smooth? how are the tires? anything aftermarket?

yep, need pics dude. :slight_smile:

Carbs were cleaned out this winter… plugs were done… idle is smooth. tires are about 2 weeks old maybe 300 miles on them… as for aftermarket… well it has tireflys on it :lolsign: ill have pic up tonight…

definetly not an easy fix at all whole tranny needs to come out and split, Engagement dogs are bad and very expensive, better off with buying new motor and trans for about 8-1200 off ebay

has it been taken to computrack? otherwise that “frame re-welded” scares the ish out of me

btw i paid 3500 for a heavily modded 99 r6, and 2250 for an 01 that had been down

might want to come down a bit, with frame issues and tranny issues

make offer!!! i need money for a car real bad… and as for the frame. it was done right… dons did it… i trust it 100% (enough to go a buck fifty on it… state trooper didnt like that one :lol: )

Who’s “Don’s”?

dons auto/ welding on union near cheek police station. high quality place

what happened to the pics?

i’d like a mini version of rick’s bike to go, thank you.

from what i hear, most r6s have 2nd gear take a shit

g/l w/ sale…if i had the money id do it in a heartbeat

that just means the welds are (possibly) done right. i highly doubt they have a way to align a frame at “dons auto.”

also, yes 2nd gear problems are common on r6’s, and when it gets bad you need a tranny. try wera.com for a tranny, there’s a ton of shit on there

im just saying the bike rolls straight… lol im looking for something newer… need a down payment lol im looking at new r6 or that new triumph 675…

wasnt dons auto.

then what dons was it dude?

and where are the f’in pics

dons welding… and i will take pics in the morning… it was up at mighty tonight…