92 chasis (no rust on frame, new windshield (this summer), 2 new stock lower control arms, all new lower ball joints, all new polly bushings(done last spring), new front sway bar end links (done this summer)
SOLD
Stance GR+ PRO less than SOLD
gt2871r turbo -SOLD
Koyo alum. rad SOLD
sr with spun rod bearing / with tranny Exedy clutch and short shifter. $500
Greddy guages oil press, boost, egt. all with sensors SOLD
walbro fuel pump with brand new Nissan sending unit SOLD
Brand new ss braided clutch line SOLD
intercooler SOLD
ss intercooler piping SOLD
HKS ssqv blow off valve SOLD
Engine damper SOLD
Z32 mafs SOLD
3" ss intake $150
Cusco front strut tower brace SOLD
Cusco rear strut tower brace SOLD
All parts are in great condition
Located in Waterloo
PM for info on parts or for pics
Ya Bing I did. It has all new polly bushings, all new ball joints, new Tein steering end liks, new front sway bar end links, new paint 2 years ago (has minor surface rust on the lip of the wheel well and some rust starting on the strut towers. The frame is mint and the rest of the body is in great shape no rust anywhere but where I stated. Maxima calipers and Altima rotors (or the other way around) bigger than stock 240 front brakes. Brand new front windsheild. It is missing the front bumper.
This car is as good as your going to find. It would make a perfect project for somone who wants minimal work to do. It has an sr in it now but #1 rod bearing is spun.
The rear strut brace is monted to the two studs that come from the rear coilover.
This intercooler can be mounted in any car with some modifications. I had to weld a bracket and such on my s13. As far as the piping goes you would have to se if it would route the same but you could, and likely will have to modify it as well.
92 chasis
almost brand new Stance coilovers
Intercooler with pipping
SR (spun #1 rod bearing) with tranny (no wiring harness,ecu or ignitor)
3 Greddy guages (oil pressure, boost, egt)
