Upon closer inspection. The front spindles and front hubs are from a S14. So, it will bolt up to S14. But You may need some other parts to make it work on S13. Please check http://www.pdm-racing.com/products/5boltconversion.html . The hub/bearings are in excellent condition.
The parts locate in Calgary.
250 (I need them gone)
If you need, I can also get you a set of front Aluminmum Z32 30mm Calipers for $200
no worries!! didnt want some of the newbies around here getting comfused and asking more dumb questions…such as how do i do a blot conversion??? and etc hahah
Infomation has been updated. The conversion kit will bolt on to S14. But you need some other parts beside the spindle for make it work on S13. Please check http://www.pdm-racing.com/products/5boltconversion.html for parts you need for S13.
I think you need at least one “Moog K9820 S14 Front Lower Control Arm Ball Joint”, as one of the ball joint on the lower control arm is blown during shippment. Then you may want to get the “S14 Spindle Spacers S14SS”, but it is not really necessory, since you can mod the front struts instead (resize the bolt holes from 13mm to 14mm) and use s14 bolts for the spindle instead.
