GB: Megan Racing Everything!

Classifieds
1

Hey guys,
This is a big one, lots of Megan Racing items for sale here. Check out the GB pricing.

240sx MR Short Shifter Kit = $90
http://www.enflowproductions.com/images/temp/mrsss13.jpg

S13/S14 MR SR20DET Billet Aluminum Pulley Set (3 colours) = $125
http://www.enflowproductions.com/images/temp/srpulleykit.jpg

240sx MR Front/Rear Strut Bars = $65
http://www.enflowproductions.com/images/temp/mrs13sb.jpg

240sx S13/S14 MR Coilover Damper Kits = $1195
http://www.enflowproductions.com/images/temp/mrcoilovers.jpg

MR Aluminum Intercoolers Large = $350
Small = $300
http://www.enflowproductions.com/images/temp/mrintercoolerlarge.jpg
http://www.enflowproductions.com/images/temp/mrintercoolersmall.jpg

MR LED Guages = $90
Boost/Vacume/Volts/AFR/Water/Oil/RPM
http://www.enflowproductions.com/images/temp/mrturbo.jpg
http://www.enflowproductions.com/images/temp/mrguages.jpg

240sx MR Lowering Springs = $138
http://www.enflowproductions.com/images/temp/mrlowering.jpg

SR20DET Stainless MR Downpipe = $149
http://www.enflowproductions.com/images/temp/mrdown.jpg

SR20DET Stainless Turbo Manifold = $210
http://www.enflowproductions.com/images/temp/mrmani.jpg

All prices are in Canadian Dollars and include all taxes, shipping fee, duties, ect. Final Price, No Hidden Costs

This GB will be going on until April 5th, to give everyone a chance to get in on it.

If you have any questions about any of the products just shoot. Then just post which item you want and also PM me just incase and I’ll add you to the list. Before the end I will post a list for everyone to see and make sure they are there and under the right category.

Thanks!
Victor

2

Avery - large FMIC

3

Added to the list :smiley:

4

Roast - Strut Bars, Black/Gunmetal

5

Great, is that front and rear roast?

6

what are the colors available on the pulleys?

silver, red, blue?

that sounds like a sweet price, i had no idea mr made theses!

Too bad i have other priorities…

7

That is correct on the colours. Yes, I didn’t either, but they look sweet and are really good quality, i’m picking up a set for my project 8)

8

how long is this going to run for?

9

About 2 weeks, i think that is enough time to get everyone who is interested down. That goes for all my group buys which will end at the same time.

10

Will you be running more later? Everyone always runs GBs in “Poor Solarian Time”… can’t you wait for “Rich Solarian Time” ? :smiley:

11

Hahaha, well if this one goes well and there is interest for another then I will try. But for now just plans for this one.

12

It’s just that I intend to buy an exhaust mani w/ turbo extension, a downpipe and two gauges from MR, and would really love these savings :slight_smile:

Get in on this GB people! I want there to be a second one for me lol (yes… i am selfish… lol)

13

If i get my return in time i will be defenetly in for the springs, and possibly the pullys.

april 5th the deadline right>?

14

1] Roast --------- Strut Bars, Black/Gunmetal
2] Mark --------- Both front and Rear strut Bars, Red for both.
3] Bruce -------- Gauges: Boost/Vacum, Air/Fuel and Oil Pressure
4] Jon----------- front and rear strut bars, blue for both
5]
6]
7]
8]
9]
10]

15

Yes I am shooting for around April 5th, it all depends how much people I have down at the time. The closer it gets to the 5th i’ll keep you guys posted. Thanks!

16

I’ll take both, sorry for the late reply. I like the MR bars, they look better then other OEM stuff… I figure the Gunmetal/Black will blend in with a dirty engine bay easier also it won’t stick out as much.

What’s the ETA on delivery?

Also, has anyone used the MR Springs? I’m kinda interested…

17

I’ll take both, sorry for the late reply. I like the MR bars, they look better then other OEM stuff… I figure the Gunmetal/Black will blend in with a dirty engine bay easier also it won’t stick out as much.

What’s the ETA on delivery?

Also, has anyone used the MR Springs? I’m kinda interested…[/quote]

Hey roast Im helping with the thread so I reposted the list with what your after. Look right to you?

As far as the springs go, there not bad. There’s always better but for the price, best bang for the buck man. 8)

1] Richard ------- Strut Bars: FRONT & REAR - Black/Gunmetal for both
2] Mark --------- Strut Bars: FRONT & REAR - Red for both.
3] Bruce -------- Gauges: Boost/Vacum, Air/Fuel and Oil Pressure
4] Jon------------ Sturt Bars: FRONT & REAR - Blue for both
5]
6]
7]
8]
9]
10]

JDMRIDE will get back to you on the delevery date.

Take care man.

Easy 8)

18

Hey im interested in the coilovers. Does anyone have any experience with them and do you know how low they will lowerer ur vehicle looking to get them for an s13.

19

Check you PM luke. These babies are fully height adjustable, and 32 level damping adjustable too :smiley:

20

Has anyone used the springs yet? I was curious about thier performance and how stiff they are.