headlight removal

SON240sx Automotive
1

How do I remove the pop up headlights. Ive loctaed about 4 or 5 screws that need to come out. I was wondering if there was anything else.

thanks

2

are you trying to take out the bulb or remove the whole pop up unit?

3

if you pop your light up, take off 4 screws around the plastic on both sides, 2 on each side, than you will see more stuff inside if u cant figure it out, i dont suggest taking apart the whole assembly, if u wanna change the bulb its from behind

4

the whole unit needs to come out.

5

Like matty said, you cannot remove the bulb.

You have to replace the whole assembly.

  • Remove the 4 screws for the plastic cover

  • Remove the 2 adjusting screws for the assembly

  • Remove the spring for the assembly

  • Unplug the assembly

  • Separate the bezel and rear bracket to remove the headlight

  • Replace with new headlight in reverse order.

6

for silvia light prep, undo the plastic sheild

2 bolts on top facing the sky
4-5 bolts holding the complete assembly to the rad support,

should come out in 1 nice piece motors and all

2 plugs, lamp+motor

7

thanks guys,
exactly what i need to know.

8

Like matty said, you cannot remove the bulb.

You have to replace the whole assembly.

.[/quote]

what since when cant you remove the bulb?

9

Like matty said, you cannot remove the bulb.

You have to replace the whole assembly.

.[/quote]

what since when cant you remove the bulb?[/quote]

On an S13, the pop-up headlights are a sealed unit. The bulb is soldered in and sealed permanently.

10

the sealed unit is the bulb

11

I think we’re getting ourselves confussed.

By assembly, I mean the reflector. Which contains the bulb.

What I meant is that you cannot just replace the small bulb, like you can with a sidemarker.