OK I’ll make this short and sweet! You’ll need:
- Power window regulators & motors (glass is interchangable)
- Power Window Amp (little black box mounted on driver’s door under panel)
- Wire. That’s it!
Once you have everything mechanically in place, the electronics are simple as well:
(For reference, r = red, w = white, b = black. R/W means a red wire with a white stripe)
Starting from the passenger door, you have 3 wires coming into the car that you need. (R/W, R/B, W/B). Extend all three of these wires under the dash to the driver’s side.
From the driver’s door you should have 4 wires: W/B, B, R/B, and R/W. Extend the black wire to a ground point. Extend some +12V source and connect it to the W/B wire.
Now all that’s left to do is match up the colors.
Connect W/B to W/B (+12V should also be connected from earlier step)
Connect R/B to R/B
Connect R/W to R/W
Hope that helps you guys out.