:pedo4:
What power steering pulley is that? I am considering running power steering in the 69.
What color did you paint the turbo?
It’s a GM part, #12605677. You can find them brand new and super cheap on ebay, I think I paid like $30 shipped
I wanted something with spaces between the spokes so I could service the pump without having to remove/press on the pulley every single time to get to the bolts. Plus it weighs less and looks a bit cooler.
it’s going to be a very loud shade of orange called “LZ Ginger Red”
Isnt it called Burnt Orange?
found a fun photo from Fall '14, after a night of booting it around the streets with buddies in an M5 and a V8 A6
More NVH fixes. Due to the weird offset shifter I never really came up with a way to close up the hole I made so I was always getting a lot of gear noise (from trans), fumes when sitting still, exhaust sound, etc. Wasn’t unbearable by any means but just enough to be annoying.
Here we go:
Problem solved, right?
Few minutes later:
I ended up removing the duct that feeds the rear vent since nobody ever sits back there, and making up a blockoff for the that HVAC outlet so it’s not pissing air inside the center console. Still have to put some new sheetmetal in there to cover the shifter hole partially - it’s a weird shape that doesn’t really fit the rubber boot I bought. No pics of that
Moving on to the front end of the car - mounted up my new power steering cooler. I initially used the OEM one with no problems but since I no longer have the factory condenser tray in place, the condenser needs to be mounted in a way that gets in the way of the OEM cooler. So I tossed that guy and installed this nice Derale unit. Since the condenser fittings will be on the passenger side, I decided to mount the cooler on the driver’s side right behind the kidney grill for ideal airflow. The kit came with those thru-style zip ties that mount the cooler directly to the radiator, but I didn’t really like the idea of those two rubbing against each other - plus they look crappy and have the potential to break. So, I used the old aux fan mounting studs to mount the cooler directly to the core support.
OEM Aux Fan mount studs
Smash em out and you get this. Drilled 1 new hole to comfortably mount the cooler.
Put a longer bolt in and insulate against vibration
Trimmed some of the spacers that originally held the fan and voila
The included cooler return line (rubber) goes directly to the GM LS1 power steering reservoir and was a perfect fit for it. On the supply side (low pressure steering box -> cooler) I needed to adapt from the BMW line to the Derale line, so I reused some brass fittings I had used in the past to adapt these lines to the OEM cooler. Filled the system and no leaks, but I’ll have to double check once I fire it up since the system still needs to be bled.
In the theme of cleaning things up I decided to revise my upper rad hose. I used a generic hose (forgot when kind) but had to cut it to orient the one end correctly. No big deal, I used a plumbing style barb hose splicer which worked fine but looked cheap and rigged. I also found it annoying when filling the cooling system since the VW coolant bottle is routed down to the heater lines through a fairly small diameter hose and took forever to fill and burp. Killed two birds with one stone by finding “Radiator Hose Fillers” on good ole Summit and adding a traditional radiator cap as well. If I had known these existed I would have used them in the first place
Installed:
I tied the bleed vent on that fill neck into the coolant line that connects the steam vent on the heads and the small nipple on the C5 radiator.
Dat boot doe…
dat big bootay hoe?
Another midwinter update on little things.
Picked up an indoor/outdoor digital thermometer for the garage, the heater is fighting Buffalo cold fairly well.
IMG_20150110_113841_253 by nogiba, on Flickr
Was picking away at details the last few weeks and rather enjoying it, but had an unfortunate skiing accident that put a damper on things.
IMG_20150114_112720_717 by nogiba, on Flickr
Luckily no breaks but a severe sprain has left me one handed for the next 2 weeks.
Never one to sit still for long I got bored after 2 days, packed up my tools on a chilly Saturday and headed to a big salvage yard 90 minutes away just east of Rochester.
IMG_20150114_073308_767 by nogiba, on Flickr
I was on the hunt for a few odds and ends but mostly wanted to get my hands (correction: hand) on a pair of 15" aluminum wheels for drag duty. The website listed a half dozen 6 cylinder E39s, so chances were good, but since they don’t do individual parts inventory, I went for a ride.
Quickly found the moneypit section with a fairly clean example in burgundy
IMG_20150117_145534_116 by nogiba, on Flickr
Just 2 rear wheels remaining on that one, great shape, no rash, no bends, great, let’s get to it. Removed one after struggling with one hand but once the last nut came off a swift kick made her fall right off. Went around to the passenger side, removed nuts again, and no amount of stomping would have it come off. With the yard closing fairly soon and the wife complaining that I was going to be late for our dinner with friends, I was about to say screw it but noticed a silver wagon close by, wearing just one 15" wheel.
IMG_20150117_145554_643 by nogiba, on Flickr
IMG_20150117_145542_474 by nogiba, on Flickr
Unfortunately the other 15 was nowhere to be found, so again I was about to throw in the towel (with my good hand) but noticed that there were loose Volvo wheels littered everywhere around the wagon. The wagon was surrounded by Volvos anyhow, so on a hunch I trudged around kicking snow off loose wheels.
IMG_20150117_145600_232 by nogiba, on Flickr
Sure enough, about 6 cars away, found the other one laying on the ground and rolled her back. The wheel on the wagon was held on by just one loose bolt, so after 2 trips back to the parking lot we were good to go.
Yee haw. The kid working the desk at the yard was pretty nice and I was able to talk him into including both tires and all my other bits and pieces for free
IMG_20150117_145628_372 by nogiba, on Flickr
Thawed out on the way home and unpacked all the junk. Style 31s are fairly rare it seems (not that it really matters but just something cool), it’s fitting that they’ll live on having a set of wide drag radials wrapped around them
_DSC3570 by nogiba, on Flickr
They look awesomely bad. I cannot wait to put the radials on there, going to look badass.
_DSC3572 by nogiba, on Flickr
In keeping with the tire theme I jumped on local CL for a set of 2 rear tires in 275/35/18 for daily use on the M-Parallel wheels. The current set on there was originally on my buddy Tim’s M5, mounted up front, in a 245/40/18 - they were camber worn on the outside so I promptly ruined the insides all last summer.
Jesus take the wheel - alignment this spring!
Comparison for fun:
left - Potenza Pole Position 275/35/18
center - corded 245/40/18
right - junkyard 225/60/15. Yes, I will ruin them first few weeks it’s warm
Few parts came in
IMG_20150112_181411_986 by nogiba, on Flickr
Few steps closer to AC
_DSC3560 by nogiba, on Flickr
Off a 2003 525i in Texas. $100 shipped on ebay for a condenser cassette, condenser, AT cooler, and PS cooler. I initially bought all this just for the cassette and condenser but since I now had a provision for mounting the OEM PS cooler in the factory location I got rid of the aftermarket external cooler I had and put this together in no time.
_DSC3562 by nogiba, on Flickr
Time will tell if the condenser is in good shape, we’ll see.
_DSC3562 by nogiba, on Flickr
I also wanted to revise my throttle cable. Since I had gone through the trouble of refinishing all the front accessories and intake, it was a shame to keep a cable end that looked like this:
So he got chucked in the trash and I went back to the same bicycle shop that I originally bought the first bike brake cable from. Nearly 2 years later exactly, to be exact. 5.99 later…
The round crimped on cable end doesn’t fit in the universal end that hooks to the pedal, so chuck it up in the expensive 5 axis mill
_DSC3546 by nogiba, on Flickr
And shave her down with ol’ faithful
_DSC3547 by nogiba, on Flickr
Like a glove. Throttle body spring keeps tension on it at all times and now looks as decent as it works. No more frayed ends.
_DSC3549 by nogiba, on Flickr
Since I misplaced the original cable mount it was off to the store for a box of assorted ones. The OD was fine but cable hole needed to be opened up. I later found the original cable end sitting inside one of the shelves of my toolbox
_DSC3551 by nogiba, on Flickr
Next up is re-mounting the C5 radiator and filling the system. I need to pick up a barb fitting for the PS line but hopefully will be able to start the motor in the next week or so…
Looking good! :tup:
Nice work! Did you do all that 1 handed?
Way to do work with only one hand. I like checking in on this from time to time…
I’m curious to which yard this is because you mentioned there were Volvos. I saw what looked to be a V70 in the one picture and was wondering what else they had that I could pilfer parts from to help my cause.
I love these updates.
Keep up the goos work.
Norb you do more with 1 good hand than i do with both of mine 
Been to busy to work on the car these last few months. But a new project might be started soon and the bmw will stay the way she is.
-
-
- Updated - - -
-
Almost 15 pounds each for those tiny little 15’s.
Wilbert's | Used Auto Parts and Light Truck Parts in Rochester, NY - Their online inventory is pretty good
I gotta get moving if I’m going to get ready to line up against the Mac Daddy drug dealer mobile
Get the old mullet mobile!
Yeah is 15 lbs light for these? Has to be compared to the big ole dubs on there now. I should weigh them once they’re all mounted…
Lol…uh, thanks.
revised that post to remove the weirdness, haha.
Lol. Still worth a chuckle.
[sarcasm]Yeah it is way less creepy now[/sarcasm]
Let the creepy flow through you…