Looking to sell my other welder. got about 1700 into it after buying everything originally. used it for a month until i found my new one. but worked flawlessly every time.
Asking $1200 comes with almost everything you need.
shoot me a text if you want 716-359-2821
Includes
Miller Maxstar 200 SD welder (P/N 903701) currently setup for 220v power
Miller Foot Pedal (P/N RFCS-14)
LA-9/WP-9 Torch setup with 1/8" tungsten i believe
Lincoln Grounding cable clamp
Regulator- needs one new gauge.
only missing gas line from regulator to the welder and you are ready to weld!
Welder Features:
SD Model: Provides the basic features that are required for most TIG or Stick welding applications.
Blue Lightning™ - High Frequency Arc Starter for non-contact arc initiation. More consistent arc starts compared to traditional HF arc starters. Greater reliability and no maintenace on solid state components. Preset parameters for tungsten sizes from .020 - 1/8 inch provide optimized starting for applications from thick to micro thin material. For unique applications, custom settings are programmable.
Lift-Arc™ start provides TIG arc starting without use of high frequency.
Portable in the shop or at the job site - at 37lb the unit is easily moved from location to location.
Tailored arc control (DIG) allows the arc characteristics to be changed for specific appications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.
Hot Start™ adaptive control provides positive arc starts without sticking.
Low OCV Stick is a simple design that reduces open-circuit voltage to 9-14 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.
Auto-Line™ provides state-of-the-art flexibility by automatically connecting to 120-460 VAC, single- or three- phase power without removing the covers to relink the power source. No longer is there a concern if you have the correct machine for the shop or the job site.
Fan-On-Demand™ operates only when needed reducing noise, power consumption, and the amount of airborne contaminants pulled through the machine.
Wind Tunnel Technology™ is an Internal air flow that protects electrical components and PC boards from dirt, dust, and debris, greatly improving reliability.
LVC™ Line Voltage Compensation Keeps output of the power source constant regardless of fluctuation in input power ± 10%.
This is a DC only machine. It cannot TIG weld Aluminum
