As seen in the pics below, i need open wheel nuts but i need them to be super short. i had these ones from a set of bolt on spacers from years ago, but i need to get better ones, those ones sucked, as you can see by the rounding edges.
12 x 1.25 thread pitch.
i dont have a mic on my to measure the height, but with a tape measure they have to be shorter than 1/2" in total height
.jpg)
http://www.jegs.com/p/Centerline/749556/10002/-1/11715
call them and explain what you need, they should be able to get you it.
call HMS Motorsports in Boston MA and see if they have them as part of an H&R spacer setup (they sell 'em pretty regularly to the BMW / Porsche crowd but also have Nissan / honda etc fitments quite often or access to them overnight if not).
Try fastenal
Have a cut-off wheel handy?
get some nuts that work and go to a machine shop and ask them to surface grind the nuts to that thickness
change title to wtb wheels that were made for my car so i dont have to run spacers.
or go to a nut and bolt place they have everything.
why not just get a pass though space with longer studs?
or is it to change the bolt pattern