Parting Out Sandra! OMG

Parting out sandra? NO FUCKING WAYYYYYYYYyyyyyyyyyy

Yup.

Time for a new race car boys.

Ok so lets start withhh

Hmm…

Brakes:

300zx Front Calipers w/ Brembo Rotors – one event 250$ - SOLD
300zx Rear Calipers w/ Brembo Rotors – three events 250$ - SOLD
Custom steel braided brake lines – 40$ front 40$ rear - SOLD
Hawk Blue Racing Pads Rear – two events – 40$ - SOLD
Ferrodo DS300 Racing Pads Front (300$ pads) – one event – 80$ - SOLD

This is everything you need to do a 4 wheel 300zx brake upgrade and have spare racing pads for when you go to the track

Looking for 620$ For Everything

Engine:

SR20DET S14 NVCS w/ HKS Step 1 Cams, Apex’I 86mm headgasket – 350whp, 350wtq still running perfect. Does not burn oil or puff – 1000$

Intake manifold with SARD 850cc injectors – 200$

Stock exhaust manifold with Garrett GT2871 0.86 a/r turbo, megan exhaust housing, 3” silicone outlet coupler 90degree, taka turbo lines – 650$ *NOTE: Compressor wheel has small damage from debris, one water line is sealing but is in poor condition and should be replaced before being used, will replace for additional 50$

RPS Max 6puck Clutch and JUN Flywheel – 600$

MSD Intake manifold mounted coils, with spark plug wires and wiring harness – 200$ - WILL FIX YOUR IGNITION BREAKUP!

Total Motor Package With Clutch And Both Manifolds: 2400$ - SOLD

Cooling:

SG Motorsport Oil Cooler w/ Remote oil filter and Setrab core, AN-8 lines, adapter for S14 oil filter block adapter, with mounts for S14. Includes AIM Oil temp and Oil Pressure sensors in Filter block adapter: 350$ - SOLD

Koyo S14 Aluminum Radiator With Insane Ford Tarus Fan: 250$ - SOLD

Samco Radiator Hoses – Blue, cut for Koyo: 50$ - SOLD

Plumbing:

3” Oval side exit exhaust – 150$ - SOLD

GReddy R-SPL Intercooler piping for S14 SR plus 2” stainless hotpipe with Greddy Type-R BOV, SG-Motorsport coupler brace, all couplers and clamps, in good condition with taiwain intercooler core with brackets – 500$ *intercooler has a small leak which has been patched with resin, a new core can be purchased from bing if you care about looks.

Drivetrain:

B&M Shortshifter modified for easier 5th gear engagement: 150$ - SOLD
S14 SR20DET Transmission In Amazing Shape: 240$
S14 Diff with ATS 1.5way carbon diff and Greddy oil cover, aluminum differential mounts, recommended diff rebuild: 650$ - SOLD
Axles: 100$ for both

Suspension:

S14 Rear subframe painted orange with 5lug hubs including SPL SOLID HUB SPHERICAL BUSHINGS (550$), bings.ca suspension arms, energy suspension lower control arm bushings, everything is SOLID in this subframe. Solid aluminum subframe mounts, solid aluminum diff mounts

750$ - with diff for 1350$

Stance GR3+ Tripple adjustable shocks with 10/9 springs, setup and ready to race on, discontinued from stance – GREAT shocks – 1500$

Front S14 5lug hubs with lower control arms and Cusco TC rods: 250$ - SOLD

JIC Strut tower bars, front and rear: 250$

Electronics:

AIM Motorsports PISTA Dash, works with AEM and all sorts of ballerness – 1500$

AEM EMS with internal wideband for S14 SR – 1200$ - SOLD

SG Motorsport modified engine wiring harness for AEM EMS – 350$

SG Motorsport chassis wiring harness with switchboard including pit speed, boost up, fuel pump 1 + 2, lights, ecu, ignition, starter, aux ems switch, connects to AEM EMS and AIM motorsports dash, wiring for headlights, taillights, brake lights, alternator, starter etc. works with stock gauge cluster for speedo, for more options add it in yourself. – 700$ - SOLD

This is something that is better for you to buy as a package, as everything is designed to be integrated into each other, the chassis harness, the aim and the aem ems. On their own they will take a lot of time to setup to whatever system you are using. Package price – 3400$.

Shell and Bodywork:

Smashed carbon hood – 400$ - SOLD
Smashed overfenders – 200$ - SOLD
Smashed rear bumper – 20$ - SOLD
Smashed side skirts – 100$

Come see it to decide for yourself if you want it haha

Bare shell, non rolling, with CASC certified roll cage, mounts for flatbottom and diffuser (flat bottom and diffuser included) has some damage that would require some potential pulling or hammering – 1500$ - SOLD

Chargespeed Carbon Fibre Trunk painted blue with holes for hoodpins and APR wing: 400$

APR GTC-300 wing, minor damage to mounting point on wing and cut wing stands (both can be purchased from APR) – 600$

Fuck Sandra is dying!!!

Don’t bother lowballing, I don’t mind holding onto this stuff for a while. If when we take it apart its not in as good condition as I remember it being in, I will lower the price, feel free to offer me a decent offer on some stuff, but don’t offer me 1000$ for a complete engine otherwise I’ll just make a post about how stupid you are and humiliate you

Remember this car and all the parts off of the car are from a race car, they are not show quality in looks, but god damn do they ever work. This car was reliable as fuck, so reliable infact that we won the championship with it against triple budget cars. What does that tell you? That these parts WORK. They work WELL. If you buy something and it doenst work well for you, let me know and I will try to help make sure you have no issues!

might be 350z? dont know yet dude

It’s no Silvia but a 350Z makes better sense. :wink:

Sasha do you have all the working ebrake bits on those Z32 rears?

nah there is no ebrake stuff

just calipers and rotors

you wouldnt happen to have an breather tank, would you?

and are my fluids still kicking aruond the shop? or have you used em yet haha

like an oil catch can?

i got your pm give mea few min ill reply

i would like the 300zx front calipers/rotors , pm’d

Sasha hold that rad for me man, Next time I see you I’ll take it off you bro.

Thanks

Vee

fukk you…

if you sit on that stuff i may take it in the off season for you to put on my car… alot of it.

also, 350z is a good idea. There is alot of stuff i can get for them or build for them that i havent bothered doing because i dontk now anyone with one.

Hey guys, im getting a lot of feedback already and i just want you to know that it is first come first serve so if i talk to you on the phone and you’re planning to come see stuff or whatever and someone shows up with cash in hand or EMT’s me the money then they get the stuff

it is not that i dont want to help you out but it is entirely the fact that i cant keep tabs on who wants what and be chasing people around and confirming stuff. it is much easier for me to just sell it when someone wants it right away.

Thanks for understanding.

Any further questions you can get me at sanis@sg-motorsport.com

sasha, im coming down for the intake mani and sards on wed around lunch time. ill call before i head down…

pm sent

you have motor mounts that are filled or nismo?

sashy

call me when u get a chance

call me too, rad, inc/mani

hey SASHA

PM’d you about the JIC f/r strut bars… will take off your hands immediately!

motor mounts?

motor mounts are nismo tranny mount is peak performance or some shit like that urathane

280$ for all 3 mounts

hey sasha! r u going to be a the shop today?

sorry the last few days have been hectic

call my cell we will be there today ripping sandra apart

most parts will be available at the end of the day

the car will be entirely parted most likely end of day tommorow, along with other parts for sale and pictures updated